Plumber

Job Description

Job Description

Job Title: Plumber

Job Description

This role involves performing underground and above-ground plumbing work on large commercial new construction and renovation projects. You will install and repair drain, waste, and vent systems, domestic water and sanitary systems, and complete both rough-in and finish phases, including fixtures and hardware. The position requires strong technical skills in pipe installation, blueprint reading, and working with a variety of materials such as cast iron, PVC, CPVC, copper, and PEX.

Responsibilities

• Install, repair, and maintain pipes, fittings, and fixtures for heating, water, and drainage systems in accordance with specifications and applicable plumbing codes.
• Perform rough-in plumbing work above ground and underground, including installing vents, sewers, connections, and waterlines for large commercial projects.
• Complete finish and trim-out phases by installing and connecting fixtures and hardware such as toilets, sinks, and related components so they are ready for use.
• Work with cast iron pipe and no-hub systems to install and maintain drain, waste, and vent systems.
• Measure, cut, thread, and bend pipe to required angles using pipe cutters, hand tools, power tools, pipe-threading machines, and pipe-bending machines.
• Install CPVC, PVC, copper, and PEX piping systems, including domestic water lines and sanitary lines.
• Install hangers and supports for piping and fixtures to ensure proper alignment and secure installation.
• Read and interpret blueprints and specifications to determine layout, routing, and installation requirements for plumbing systems.
• Work effectively on new construction and renovation projects in large commercial, institutional, and hospitality environments.
• Collaborate with other contractors and trades on-site to coordinate work and maintain project schedules.
• Use basic hand tools and plumbing equipment safely and efficiently while maintaining a clean and organized work area.
• Follow all site safety procedures and standards while working in active construction environments and outdoor conditions.

Essential Skills

• Minimum 5 years of plumbing experience, preferably in large commercial construction.
• Proficiency in underground and above-ground rough-in plumbing, including vents, sewers, connections, and waterlines.
• Experience completing finish and trim-out phases, including installation of toilets, sinks, and related hardware.
• Ability to install and repair pipes, fittings, and fixtures for heating, water, and drainage systems according to specifications and plumbing codes.
• Strong ability to measure, cut, thread, and bend pipe using pipe cutters, hand tools, power tools, pipe-threading machines, and pipe-bending machines.
• Hands-on experience with cast iron pipe, no-hub systems, CPVC, PVC, copper, and PEX piping.
• Ability to read and interpret blueprints and specifications accurately.
• New construction and renovation experience in large commercial settings, including domestic water and sanitary systems.
• Capability to install fixtures, hangers, and piping to required standards.
• Ownership and competent use of basic hand tools required for plumbing work.
• Mechanical aptitude and strong piping installation skills.
• Ability to work safely and efficiently in active construction environments and outdoor conditions.

Why Work Here?

You will join a steadily growing mechanical contractor backed by a parent organization with a long history of stability dating back to the 1980s. The company focuses on commercial, institutional, and hospitality projects and maintains a robust backlog of work, with dozens of active and upcoming projects. You can expect consistent full-time hours, a contract-to-hire path that supports long-term career opportunities, and exposure to complex, high-profile projects that help you expand your skills and experience.

Work Environment

This position is based on a new construction site in the Sarasota, FL area, specifically supporting work on a large aircraft hangar project. You will work primarily outdoors and must be comfortable working in the elements, including heat and other weather conditions typical of an open construction site. The work environment involves collaborating closely with other contractors and trades, operating in an active job site with ongoing construction activities. The standard schedule is Monday through Friday from 7:00 a.m. to 3:30 p.m., providing a consistent daytime work pattern. You will regularly use hand and power tools, pipe-threading machines, pipe-bending machines, and other mechanical equipment typical of commercial plumbing work.

This is a Contract to Hire position based out of Sarasota, FL.

The pay range for this position is $28.00 - $35.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Sarasota,FL.

This position is anticipated to close on Jun 26, 2026.

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Company Description

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.