Automation System Designer (Electrical Engineering)
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
- Ensure all Hanwha Philly Shipyards safety procedures, rules and regulations are performed and met
- Perform basic and detail design activities for assigned systems, including calculations, diagrams, drawings, design change notices, and equipment selection relevant to assigned systems
- Assigned Systems, including but not limited to Alarm and Monitoring, Fire Detection and Alarms, and Alarm Signaling Systems
- Participate in basic and detail design activities within the Electrical Design Department, including review of design documents from other shipyard engineers, vendors, and external design partners
- Coordinate and assist the fabrication, assembly, installation, and/or testing of assigned systems, and equipment
- Prepare technical specifications, collect vendor information and maintain makers list for assigned systems
- Generate and access Bills of Material and provide technical support for material tracking, logistics, handling, and timing of installation
- Propose technical improvements; develop and implement quality standards applicable to assigned systems
- Interface with Owner and Class to resolve technical issues
- Develop testing procedures for assigned systems
- Provide field engineering support as required to support production activities during Class and owner inspections or responding to production questions arising during vessel construction
- Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to assigned systems
- Perform other related duties as required and assigned
- Able to communicate effectively with all levels of the organization, both verbal and written
- Decision making/problem solving
- Organizational understanding
- Willingness and ability to work as a team member
- Conflict resolution
- Strategic thinking
- Stress management
- Teamwork
- Bachelor's Degree in Automation and Electronic Systems is preferred; however, candidates with a technical diploma and 10+ years experience in ship design and/or construction may also be considered
- Minimum 10 years experience in shipbuilding, Automation and Electronic Systems Specialization, or manufacturing
- Experience with Automation System or Control system design and construction
- Proficiency with MS Office and CAD systems such as AutoCAD
- Knowledge/experience concerning basic and detail ship design
- Knowledge/experience concerning modern shipbuilding practices
- Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as international experience or familiarity with European and/or Asian Shipbuilding Standards
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Automation System Designer (Electrical Engineering) in Somerdale, NJ vacancy
- ...A leading recruitment agency is seeking a Mechanical Engineer I to support senior engineers in designing electrical systems. The role combines office work and remote capacity, requiring proficiency in AutoCAD and experience in electrical system design. The ideal candidate...SuggestedWork at officeRemote work
- 慨正橡扯 is seeking a full-time Systems Engineer in Mount Laurel, NJ. This role involves design, development, and testing of advanced Department of Defense products where creativity and collaboration are key. Ideal candidates will have a Bachelor's in a STEM field and at least...SuggestedFull time
$100k - $130k
A technology solutions firm in New Jersey is seeking an experienced Electrical Engineer to design and develop high precision electronic components and systems. Candidates should have a Bachelor's degree in Electrical or Electronic Engineering, and at least three years...Suggested$45k - $65k
...UFP Site Built is the leader in designing and manufacturing value-added wood and non-wood products for the construction industry. We offer... ...are preferred Working knowledge of floor and rood systems and the ability to spec out beams and hangars $45,000 - 65,...SuggestedRemote work- ...Liberty Personnel Services, Inc. is seeking an Electrical Distributive Controls Engineer in Haddonfield, New Jersey. The ideal candidate will have over... ...license. Key responsibilities include working with control systems around compressors, pumps, and generators, with desired...Suggested
- Electrical Engineer Responsible for the research, design, selection, development, testing, documentation, and support of electronic components, products, and high precision systems. Design electronic components and systems for high precision instrumentation. Develop...
- ...Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA... ...Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier... ...support critical ship system processes, design, and development for naval and...For contractorsFor subcontractor
- ...Miller-Remick, a full-service MEP engineering firm, is looking for an energetic,... ...innovative individual for a Senior Electrical Engineer position. In addition to the... ...investigations/assessments of facilities, design building electrical systems, specification preparation, project...Work at officeLocal area
- ...experienced Store Planner / Designer with a background in supermarket... ...with architects, engineers, project managers, and operations... ...coordinating HVAC-R and MEP systems, selecting equipment to support... ...Qualifications: Bachelor’s degree in Electrical Engineering, Mechanical...
$100k - $160k
...Organization Description CONCORD ENGINEERING GROUP, INC. is searching for... ...providing industry-leading design and consulting services to... ...business unit delivering system designs and solutions for... ...supervision of the Director of Electrical Engineering Design control...Full timeTemporary workPart timeFor contractorsSummer workWork at officeLocal areaImmediate startFlexible hours$75k - $142.76k
...Martin Rotary & Mission Systems (RMS) delivers... ...naval combat systems, automation technologies, and mission... ...Solutions Integrated Engineering (AIMS IE) organization... ...development, hardware design, and more. Occasional... ...environments where mechanical, electrical, software, and control...Full timeTemporary workWork at officeRelocationFlexible hoursShift work3 days per week- The Work The Hardware Engineer Sr. will be supporting... ...Machinery Controls and Automation programs within RMS.... ...the customer including system troubleshooting both in... ...development, hardware design, and more. Occasional... ...where mechanical, electrical, software, and control...Full timeWork at officeRelocationShift work3 days per week
- 慨正橡扯 is seeking a Hardware Engineer Sr. to support Machinery Controls and Automation programs. Responsibilities include coordinating with a multidisciplinary team, system troubleshooting, and hardware design. The ideal candidate has a Bachelor's degree in Engineering,...Relocation
- NDI Engineering Company is seeking an Electrical Engineer to support the design of US Navy test facilities. This position will be based out of our office in Thorofare,... ...candidate will have experience in electrical systems design, development, and testing, specifically...Full timeFor contractorsWork at office
- ...Opportunities: Sr. SmartPlant Piping Designer (965) Holtec International... ...supplier of equipment and systems for nuclear, solar,... ...across multiple disciplines (Electrical, Civil, Mechanical, Nuclear,... ...comprised of other designers, engineers, adjuncts, and project staff....
$120k - $155k
...Senior Highway Designer As GFT continues to grow and expand, we are seeking a Senior... ...working on highways and bridges or traffic engineering, our team excels in resilient,... ...complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable...Work at officeLocal areaRemote work- PBF Energy is seeking an Instrument/Analyzer Engineer to support maintenance, reliability, and capital projects focusing on instrumentation and safety systems. You will act as the Subject Matter Expert while coordinating closely with Operations, Maintenance, and Technical...
- ...exciting opportunity for a Traffic Designer in the Transportation... ...recognized, full-service infrastructure engineering firm delivering innovative... ...in the design of traffic signal/electrical plans and intersection and highway lighting systems Perform intersection and roadway...Work at office
$75k - $142.76k
...in Mount Laurel Township is seeking a Hardware Engineer to support various Machinery Controls and Automation programs. This full-time role involves coordinating with a team for system troubleshooting and hardware design. Candidates should have a Bachelor's degree in Engineering...Full time- Lockheed Martin is seeking a hardware engineer for their Mount Laurel Township office. The role involves... ...a multi-disciplinary team, troubleshooting systems, and supporting various programs within the Machinery Controls & Automation department. Ideal candidates will have a...Work at office
- Builders FirstSource in Berlin, NJ is offering an exciting opportunity for a Trainee Component Technician/Truss Designer. This role includes a comprehensive 16-week training program designed to equip you with vital skills in truss design and construction. You will collaborate...ApprenticeshipTraineeship
$95k - $125k
...You Will Do GFT is seeking a BIM / CAD Designer - Transportation to join our transportation... ...the complexities of modern, multimodal systems and ensure safe, efficient, and reliable... ...workflows and digital tools Assist engineering staff with the development of roadway, drainage...Work at officeRemote work$92k - $151.8k
...) RVE (an Ardurra company) is seeking an Electrical Engineer to join our team in Cherry Hill, Egg Harbor... ...who need to keep their facilities and systems operating safely, reliably and cost-effectively. The foundation of our design approach is energy savings, including finding...Work from home$100k
...Mechanical Engineer I Location: Greater Philadelphia area (some remote capacity). Some... ...host of different programs, projects, systems, processes and senior leadership of... ...Overview: Support senior engineers in designing electrical systems for various clients. Coordinate...Summer workWork at officeLocal areaRemote work3 days per week- ...Job Description Description: We are looking for a talented GUI Designer to create intuitive, visually compelling, and accessible... ...-fidelity design specs Build and maintain a scalable design system including components, icons, color palettes, and typography...
$97k - $147k
Electrical Engineer JOB SUMMARY The Electrical Engineer, as part of the Equipment & Reliability Engineering... ..., is responsible for specification, design, and maintenance of electrical... ...installations, UPS and substation battery systems). Principal Responsibilities Provide technical...Work experience placement$73.9k - $84.98k
Instructional Designer (PSS2), Rowan Online Job no: 501508 Work type: Regular Full-Time Location: Glassboro, New Jersey Categories: Professional... ..., and enhance online courses using the Learning Management System and integrated technologies. Apply instructional design...Full timeWork at officeLocal areaRemote workWork visaMonday to FridayFlexible hours$92k - $151.8k
...Ardurra is seeking an Electrical Engineer to join their team, focusing on power distribution, lighting, and fire alarm systems design for various projects. The role involves leading and mentoring teams while managing complex projects across commercial and educational sectors...- A leading home improvement retailer is seeking Kitchen Designers to assist customers in creating their dream kitchens and baths. In this role, you will engage with customers, guide them through the design process, and provide expert advice on products and services. Responsibilities...
$83k - $132.5k
...provides an inclusive, engaging environment designed to empower employees and promote work-... .... The successful candidate will use Pro Engineer and/or Creo to design and document all... ...Operates interactive computer graphic systems as required. Qualifications: College...For subcontractorWork at officeLocal areaRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Automation System Designer (Electrical Engineering). Be the first to apply!


