1st Shift Warehouse Associate

***THE HOURS FOR THIS JOB ARE 6:00 AM - 4:30 PM MONDAY - THURSDAY***Load and unload trucks (Full 53' trailers as well as LTL loads)Receive orders - audit, label and put away.Prepare orders - pack into boxes, sort onto pallets, create shipping labels, apply labels, and shrink wrap pallets.Pull parts for our Service Parts department and load them onto racks.Load raw substrate onto racks and deliver to the E-Coat department.Sands defects, smoothes, and prepares surfaces.Drill holes and mask parts appropriately.Label and sign off on all parts prepared.Maintains solid communication with Quality Assurance Department.Load appropriate materials for production.Identification, safe handling, and appropriate disposal of materials.General cleaning of the warehouse - breaking down boxes and placing them in recycle bin, stacking and sorting pallets, sweeping floor, trash removal, etc..Assist with maintaining walking/forklift paths during winter months.Inventory- regular cycle counts and daily monitoring of products being pulled. /Restocking shelves from overstock areas as product is being pulled.Create build slips for products that are being loaded onto racks.Other duties as assigned.Benefits401(k)401(k) MatchingHealth, Dental, and Vision InsurancePaid Time OffEmployee DiscountSkills & QualificationsHigh School Diploma or equivalentOne + years of experience in the field (preferred)Have a basic understanding of computers and be able to use Microsoft Office products (specifically Excel and Word).Forklift Experience (preferred)Working conditionsThe worker is subject to both environmental conditions: Activities occur inside and outside.The worker is subject to extreme cold: Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity.The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity.The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level.The worker is subject to vibration: Exposure to oscillating movements of the extremities or whole body.The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dusts, mists, gases or poor ventilation.The worker is subject to oils: There is air and/or skin exposure to oils and other cutting fluids.The worker is required to function in narrow aisles or passageways.Physical requirementsMust be able to be on feet all day and able to lift up to 50 lbs.Heavy work: Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion.Balancing: Maintaining body equilibrium to prevent falling when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces. This factor is important if the amount and kind of balancing the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium.Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles.Kneeling: Bending legs at knee to come to a rest on knee or knees.Crouching: Bending the body downward and forward by bending leg and spine.Crawling: Moving about on hands and knees or hands and feet.Reaching: Extending hand(s) and arm(s) in any direction.Standing: Remaining upright on the feet, particularly for sustained periods of timeWalking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to anotherPushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward.Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion.Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles.Grasping: Applying pressure to an object with the fingers and palmTalking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quicklyHearing: Perceiving the nature of sounds at normal speaking levels with or without correction and having the ability to receive detailed information through oral communication and making fine discriminations in sound. #J-18808-Ljbffr Priority Dispatch Corp.