Certified Weld Inspector
Birdon Pty Ltd
Certified Weld Inspector
This position is located On-site in our Portland, CT location
- Codes, standards, and specifications : Interpretation of the intent and ensuring the requirements of codes, standards and specifications are met.
- Welding procedures: Ensuring that a procedure is available, has been approved and is being employed in production.
- Witnessing of welder and procedure approval tests : Witnessing the preparation of test plates and destructive tests and verifying compliance with appropriate standards and specifications.
- Welder approvals: Verifying that adequate and valid welder approvals are available, and that only approved welders are used in production.
- Welding consumable's identity: Verification of correctness of welding consumables (electrodes, filler wires, consumable inserts, gases, fluxes etc.
- In process welding inspection and surveillance: Surveillance during welding to verify compliance with specified procedures including any preweld, dimensional, preheat, interpass temperature control and post heat requirements.
- Inspection and Test Plans : Assistance
Vacancy posted 19 hours ago
Similar jobs that could be interesting for youBased on the Certified Weld Inspector in Portland, CT vacancy
- ...Certified Weld Inspector This position is located on-site in our Portland, CT location. Roles and Responsibilities: The Certified Welding Inspector ensures that the work produced by welders meets specifications for quality and safety. They perform tests on welds...Suggested
- ...ensure asset reliability and minimize downtime. Position Overview: TEAM is seeking a detail-oriented and experienced Certified Welding Inspector (CWI) to perform quality control and code-compliance inspections on welded components and assemblies. The successful...SuggestedDaily paidWork at officeLocal areaShift work
$18 per hour
...Wallingford, CT is looking to add an experienced spot welder to their team. Qualified candidates will have experience performing spot welding, inspections, and operating lathe machinery. This is a first shift opportunity paying $18/hr, or more depending on your experience....SuggestedHourly payPermanent employmentTemporary workWork experience placementShift workDay shift$18 per hour
...Wallingford, CT is looking to add an experienced spot welder to their team. Qualified candidates will have experience performing spot welding, inspections, and operating lathe machinery. This is a first shift opportunity paying $18/hr, or more depending on your experience....SuggestedDay shift- Responsibilities Ensure accuracy in First Part Inspections Identify and report any operational issues, irregularities and "bad parts" or discrepancies to leadership, promptly. Utilize current software to create and manage detailed inspection reports Conduct thorough Inspections...Suggested
- Precision Fuzing and Sensors in Middletown, CT is actively hiring for Quality Inspectors to join our Operations Department. You will inspect assemblies and sub-assemblies using precision tools and interpret engineering drawings to verify dimensional and visual conformity...
- ...to maintain maximum quality standards and to prevent scrap work and minimal rework. Must be OAP (Operator Acceptance Program) certified to inspect own work using various hand tools and measuring instruments to maximize quality. Assist in training new employees....Monday to FridayShift workAfternoon shift
- ...necessary. Perform routine servicing throughout assigned area following specified procedures and written instructions such as inspector's check list for upkeep and assure equipment operates properly. Assist others who are responsible for specialized inspection processes...Work at officeLocal areaRemote workAfternoon shift
- ...Parts Inspector Visium Resources has been asked to identify qualified candidates for this Parts Inspector position. This position is a contract to direct position that is fully onsite in Middletown, CT 06457. Schedule - 1st shift: 6:30 AM - 3:00 PM M-F. Parts Inspector...Contract workDay shift
- Precision Fuzing and Sensors is actively hiring for a Quality Inspectors in Middletown, CT. This role plays a pivotal part in our Operations Department, directly contributing to our company Core Values (REACH). The ideal candidate will have a background in manufacturing...Work at officeMonday to FridayShift workDay shift
$95k - $160k
Wright-Pierce, an award-winning, multi-discipline environmental engineering firm specializing in water, wastewater and civil infrastructure, is seeking a licensed Wastewater Project Manager to join our company. Salary range is $95,000 - $160,000/yr. NOTE: Final salary ...H1bWork at officeLocal areaFlexible hours- ...using hand tools, power tools, and machines. Set up and operate fabrication machinery. Assemble fabricated components using welding, riveting, or fastening techniques. Inspect finished products to ensure conformance to specifications. Maintain a clean and organized...
- Wright-Pierce, an award-winning environmental engineering firm, seeks a licensed Wastewater Project Manager to join our team near Middletown, CT. Lead multi-disciplinary wastewater projects, mentor staff, and manage client relationships to ensure on-time, on-budget delivery...
- ...Quality Inspector Quality Inspector will be responsible to ensure that aerospace parts are inspected per drawing specifications with highest standards. Polamer Precision is seeking a highly motivated and detail-oriented person with strong understanding of blueprint...Temporary workShift work
- Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...Local area
- ...malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices. Weld or solder broken parts and structural members, using electric or gas welders and soldering tools is a plus. Qualifications:...Hourly payFull timeTemporary workPart timeMonday to FridayShift work
$20 - $30 per hour
...CMM Quality Inspector – Aerospace Manufacturing Location: Winsted, CT Shift: 2nd Shift | 3:00 PM – 11:00 PM Pay: $20–$30/hr + 15% Shift Differential We are seeking an experienced CMM Quality Inspector to support precision aerospace manufacturing operations....Shift workAfternoon shift$20 per hour
Landscaper Coughlin Service Corp. • Middletown, CT • Full-Time • $20.00-$25.00/hour About Us Coughlin Service Corp., a family owned and operated business for 58 years, is looking for a dependable Landscaper to join our crew. Since 1968 we have built our name on three things...Hourly payFull time$21 - $25 per hour
...advanced measurement instruments to complete work. May perform basic root cause analysis. Job Description We are hiring a Quality Inspector II on 1st shift working with metals. Pay $21-$25 per hour Key Accountabilities Accurately inspect raw materials and products visually...Hourly payLocal areaShift workDay shift$23 - $29 per hour
...Computer skills required for retrieving job instruction, recording inspection data, and timesheet reporting Understand and be certified for the use and care of basic metrology, i.e. micrometers Ability to multi-task and time management skills. Ability to stand...Hourly payFull timePart timeMonday to FridayShift workDay shift- Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and ...Work at office
- Overview This entry‑level position serves as a critical link within the engineering organization, reporting directly to the Engineering Documentation and Change Administrator. The Engineering Documentation & Change Specialist is responsible for managing and processing ...
- Manufacturing Engineer We are seeking a Manufacturing Engineer to support and improve manufacturing operations at our Middletown, CT facility. In this role, you will work closely with production, quality, and engineering teams to enhance process efficiency, solve technical...
- ...continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and is ISO 13485 certified. SUMMARY OF POSITION: Reporting to the Applications Manager, this role will oversee key production deliverables such as...
- ContractStaffingRecruiters.com is looking for an Industrial Engineering Intern in Middletown, Connecticut, to assist in optimizing processes and systems within the organization. This role involves working under experienced engineers and engaging in key projects that improve...Internship
- ...Job Title: Quality Inspector II Exempt Status: Non-Exempt Location: Newington, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies....Monday to FridayAfternoon shift
$47.84k - $81.33k
We have an outstanding career opportunity for aCNC Lathe Machinistto join a leading Company located inPortland, CT. Salary: $47,840 - 81,328 Responsibilities : Operate CNC lathes to produce tight-tolerance aerospace components Read prints, inspect parts, troubleshoot...Contract workTemporary workFor contractorsLocal area- In essence, industrial engineering interns assist experienced engineers in optimizing processes and systems, using analytical and problem‑solving skills to enhance efficiency, reduce costs, and improve overall performance within an organization. An Industrial Engineering...Permanent employmentInternshipSeasonal work
$30 - $35 per hour
CNC Machinist Are you an experienced CNC Machinist looking for a stable opportunity with a company that values quality, teamwork, and craftsmanship? We are seeking skilled machinists to join our growing manufacturing team and help produce precision components in a clean...Weekly payContract workTemporary work$36 - $47 per hour
...better world. Join us. Job Description AECOM is seeking an Inspector to be based in Rocky Hill, CT. The responsibilities of... ...experience. NICET certification or the ability to become NICET certified. Highway & bridge related experience. Ability to work...Hourly payWork at officeLocal areaImmediate startWorldwideRelocationVisa sponsorshipFlexible hoursShift workNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Certified Weld Inspector. Be the first to apply!


