Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Robot Operator

Mind Robotics

Teleoperations Lead Mind Robotics is building the operational backbone behind general-purpose industrial robots the data, the procedures, and the people who teach machines how to move through the real world. Our operators are the human side of that loop: they pilot robots, generate the demonstration data that trains our models, and surface the edge cases the AI team needs to see. We're hiring several Teleoperations Leads to drive that function end-to-end. This is a hands-on lead role, not a desk job. You'll spend a meaningful share of your week teleoperating robots, running collection sessions, and working through new tasks yourself before anyone else does. Then you'll turn what you learned into SOPs, train the operators behind you, and raise the bar on data quality across the team. Responsibilities Operate. You'll pilot our robots through new and existing behaviors household manipulation, commercial workflows, dexterous tasks, recovery maneuvers. You're the person who figures out how a new task should be performed before it's written down. Write the playbook. Every recurring task, bring-up procedure, shutdown sequence, safety check, and data-collection protocol becomes an SOP under your ownership. You'll define what "good" looks like pose conventions, framing, retry behavior, when to abort a take and keep those documents alive as the platform evolves. Train the team. You'll onboard new operators, run shadowing sessions, certify them on each task class, and run periodic calibration reviews to catch drift. When a new behavior comes online, you're the one who teaches it. Own data quality. You'll spot-check collected episodes, flag bad data before it hits training, and partner with the AI team on what's working and what isn't. You're the closed-loop signal between what we collect and what the models actually learn. Run the floor. Daily collection planning, shift coordination, equipment readiness, robot uptime, safety incidents the operations rhythm runs through you. You'll work cross-functionally with AI, hardware, and safety to keep collection unblocked. Improve the process. Cycle time, take success rate, hours-to-usable-data, operator ramp time you'll instrument these and push them in the right direction. Qualifications 36 years in a hands-on operational role where physical skill, repeatability, and judgment all mattered robotics teleoperation, motion capture, simulation/VR studios, surgical robotics, drone operations, stunt work, advanced manufacturing, professional gaming/esports coaching, or similar. Demonstrated experience writing SOPs, training materials, or operator certifications that other people actually used not just personal notes. Track record of training or mentoring peers, even informally. You can teach a physical skill, not just perform it. Excellent physical coordination, spatial awareness, and stamina. Master new physical tasks quickly and can articulate why one approach beats another. Strong written communication your SOPs should be clear enough that a new operator can follow them on day one. Comfortable giving and receiving direct feedback. The job is partly quality control; tact and honesty both matter. Thrives in an early, fast-moving environment where the process you wrote last month gets rewritten this month. Prior experience with humanoid or mobile-manipulation robots, VR/AR teleoperation rigs, or motion capture stages. (Preferred) Familiarity with data-collection pipelines for ML what makes a demonstration usable vs. noise. (Preferred) Light scripting or tooling experience (Python, basic shell) for logging, tagging, or QA workflows. (Preferred) Background in athletic coaching, physical therapy, martial arts instruction, or another domain where teaching motor skill is the job. (Preferred) Experience running shifts or coordinating small teams in a regulated or safety-sensitive environment. (Preferred) Logistics On-site at Mind Robotics in Palo Alto. Flexibility across shifts including occasional nights and weekends as collection demands. Travel up to ~20%, ranging from day trips to multi-week offsite collection stays.

Vacancy posted 10 hours ago
Similar jobs that could be interesting for youBased on the Robot Operator in Palo Alto, CA vacancy
  •  ...bringing families out of the stone age of remarkably dumb disc home robots. Humanity spends ~2.5 trillion hours annually on home chores,...  ...tools and equipment on the production line. Follow standard operating procedures (SOPs) and work instructions to ensure quality and accuracy... 
    Suggested

    Matician

    Mountain View, CA
    4 days ago
  •  ...Join Us in Building the Future of Home Robotics At Sunday, we're developing personal robots to reclaim the hours lost to repetitive...  ...serve as a critical link in our production lifecycle, ensuring operational continuity through precise materials kitting, inventory management... 
    Suggested
    Full time
    Contract work

    Sunday

    Mountain View, CA
    20 hours ago
  • Job Title: Machinist Location: Mountain View, CA (Onsite) Job Description: Prior experience in CNC and 3D printing is required. Fabricating parts with CNC mills, CNC lathes, CNC routers, manual machine equipment, lasers, 3D Printers and waterjets Capable of producing parts...
    Suggested

    Diverse Lynx

    Mountain View, CA
    10 hours ago
  • $55 - $60 per hour

    Job Title Job Overview: Pay Range: $55hr - $60hr Fabricating parts with CNC mills, CNC lathes, CNC routers, manual machine equipment, lasers, 3D Printers and waterjets. Capable of producing parts with -- in some cases ±0.020mm or tighter -- critical tolerances...
    Suggested

    Cynet Systems

    Mountain View, CA
    2 days ago
  • $21 - $26 per hour

     ...processes, we want to hear from you. Internship Summary Over the course of approximately 3-6 months, you’ll support manufacturing operations by owning a hands‑on machining process development project tied directly to MPP’s Klystron and Coupled Cavity Tube product lines.... 
    Suggested
    Work experience placement
    Internship
    Day shift

    Microwave Power Products (MPP)

    Palo Alto, CA
    3 days ago
  • $28.8 - $65.4 per hour

    Tesla’s Prototype Machine Shop in Palo Alto is searching for a skilled Machinist to join our innovative team. The role involves operating both manual and CNC machines to support engineering projects that contribute to sustainable energy solutions. Candidates should bring... 
    Hourly pay

    Tesla

    Palo Alto, CA
    2 days ago
  • $217k - $237k

    Technical Program Manager, Robotics, DeepMind Mountain View, CA, USA Qualifications Bachelor's degree in mechanical engineering, industrial...  ...optimization, and creating technical dashboards to track operational efficiency. Ability to travel and lead technical execution... 

    Google Inc.

    Mountain View, CA
    2 days ago
  • Role: Machinist Location: Mountain View, CA Job Description: Fabricating parts with CNC mills, CNC lathes, CNC routers, manual machine equipment, lasers, 3D Printers and waterjets Capable of producing parts with -- in some cases ±0.020mm or tighter...

    E-Solutions

    Mountain View, CA
    3 days ago
  • $256k - $278k

    Google Inc. is seeking a Senior Hardware Operations and Robot Repair Lead based in Mountain View, CA. This full-time role requires a Bachelor's degree and significant experience in hardware maintenance and robotics. You will oversee the operational readiness of a humanoid... 
    Full time

    Google Inc.

    Mountain View, CA
    20 hours ago
  • $256k - $278k

    Senior Hardware Operations and Robot Repair Lead DeepMind - Mountain View, CA, USA Required Qualifications Bachelor's degree in a technical field, or equivalent practical experience. 8 years of experience in hardware/fleet maintenance, robotics service, or field engineering... 
    Full time

    Google Inc.

    Mountain View, CA
    20 hours ago
  • $28.8 - $65.4 per hour

     ...drive Tesla’s vision forward. What You’ll Do Assist in maintenance and oversee proper setup of manual mills and lathes Facilitate operation of vertical/horizontal saws and pedestal grinders Handle setup and operation of CNC mills and lathes Cut material, build tooling... 
    Hourly pay
    Full time
    Temporary work
    Work at office
    Flexible hours

    Tesla

    Palo Alto, CA
    2 days ago
  • Production Operator page is loaded## Production Operatorlocations: Mountain View, OKtime type: Full timeposted on: Posted Yesterdayjob requisition id: R3124The Dolese Promise is built on a foundation of integrity driven by our passion for quality, safety, and reliability... 
    Permanent employment
    Temporary work
    Local area
    Flexible hours
    Shift work
    Night shift
    Weekend work
    Afternoon shift

    Dolese Bros Co

    Mountain View, CA
    1 day ago
  • The Role We're looking for a Senior Staff Technical Program Manager to serve as the operational and strategic backbone of Mind Robotics' core platform development. This is a founding program management role — the connective tissue between our hardware, software, and data... 

    Mind Robotics Inc.

    Palo Alto, CA
    1 day ago
  • $44.8 - $60.7 per hour

     ...scopes outside of typical core competencies as required and willingness to travel to various project locations as required. Experience operating scissor lifts, boom lifts, forklifts, and hand power tools, with a creative mindset to develop innovative solutions. Benefits... 
    Hourly pay
    Temporary work
    Flexible hours

    Tesla

    Palo Alto, CA
    20 hours ago
  • Rhoda AI is seeking an HR Manager to build and scale people operations in a fast-growing robotics company. You will play a crucial role in shaping the employee experience through hands-on and strategic HR functions. The ideal candidate will have over 7 years of HR experience... 

    Rhoda AI

    Mountain View, CA
    20 hours ago
  • $20 - $23 per hour

    Hands-On Manufacturing Role Operating Specialized Production Equipment - Process Equipment Operator Pay Range: $20.00 - $23.00/hour Location: Palo Alto, CA Microwave Power Products (MPP) is seeking a Process Equipment Operator to operate and monitor equipment used to... 

    Microwave Power Products (MPP)

    Palo Alto, CA
    2 days ago
  •  ...Summary This MOTOR VEHICLE OPERATOR position, is located in the Distribution Section of the Deployment and Distribution Flight, Logistics Readiness Squadron, Mission Support Group, at an ANG Aviation Wing and is part of the CA 129 RQW. This is an open until filled announcement... 
    Permanent employment
    Temporary work
    Relocation
    Trial period
    Relocation package

    Air National Guard

    Mountain View, CA
    10 hours ago
  • At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never...
    Visa sponsorship
    Relocation package
    Flexible hours

    U341 Alcon Research, LLC. Company

    Belmont, CA
    3 days ago
  • $30 - $35 per hour

     ...manually using barcode scanners and climbing forklifts. We're Corvus Robotics. Our fully autonomous Corvus One drones use computer vision &...  ...document electrical and mechanical tests Work with a team of operational professionals to produce polished and reliable robots This... 
    Full time
    Part time

    Corvus Robotics, Inc.

    Mountain View, CA
    4 days ago
  •  ...Motor Vehicle Operator This is a T32 Excepted Service, Indefinite Position. Indefinite appointment cannot exceed 5 years. Selectee may be non-competitively converted to permanent status if/when funding becomes available or position becomes unencumbered. The primary... 
    Permanent employment

    Department of the Air Force

    Mountain View, CA
    5 days ago
  • Innate, a robotics company in Palo Alto, is looking for an Operations Lead / Chief of Staff to work closely with the CEO as the company scales. Your role will involve enhancing customer experience, managing shipments, and developing internal systems for efficient operations... 

    Innate

    Palo Alto, CA
    3 days ago
  • $24 - $26 per hour

     ...CMV Operator (Non CDL) Driver OES Equipment, part of the DPR Family of Companies, is a fast-paced construction supply and equipment rental company. We are seeking an experienced CMV Operator (Non CDL) Driver to help meet our many demands of our business in the greater... 
    For contractors

    DPR Construction

    Palo Alto, CA
    3 days ago
  • $20 - $23 per hour

    Microwave Power Products (MPP) is looking for a Process Equipment Operator in Palo Alto, CA, to operate specialized cleaning equipment. Your role will involve quality inspections, setting equipment parameters, and ensuring compliance with safety standards. This hands-on... 
    Hourly pay

    Microwave Power Products (MPP)

    Palo Alto, CA
    2 days ago
  • $136k - $200k

     ...DoorDash Labs is an independent team within DoorDash. We explore robotics and automation to transform last mile logistics in the long...  ...talk to you! About the Role This role acts as an experienced operations manager at DoorDash Labs. You will ensure that DoorDash Labs executes... 
    Hourly pay
    Work at office
    Local area
    Flexible hours

    DoorDash

    Sunnyvale, CA
    1 day ago
  • $21 - $26 per hour

    Microwave Power Products (MPP) is hiring a CNC Machinist Intern in Palo Alto, CA. This position offers a pay range of $21 to $26 per hour and provides an opportunity to develop hands-on machining skills in a precision manufacturing environment. The role involves collaboration...
    Hourly pay
    Internship

    Microwave Power Products (MPP)

    Palo Alto, CA
    3 days ago
  • Laiba technology in Mountain View, California, is seeking an experienced CNC Machinist. The role requires extensive hands-on experience, particularly in CNC programming and 5-axis milling, to fabricate parts and manage projects with critical tolerances. Candidates should...

    Laiba technology

    Mountain View, CA
    20 hours ago
  • $123k

    Job Title Senior 5 Axis CNC Machinist Job ID 105574 Position Type Full-time Location Mountain View CA / Onsite Role / Responsibilities Fabricating parts with CNC mills, CNC lathes, CNC routers, manual machine equipment, lasers, 3D printers and waterjets Capable of ...
    Full time
    Local area

    HCLTech

    Mountain View, CA
    20 hours ago
  • $35 - $50 per hour

     ...grow and needs a disciplined machinist capable of setting up and operating precision turning equipment while maintaining extremely tight...  ...welcomed and easily transferable Additional Experience Helpful: Robot programming exposure Automation experience Inspection... 
    Hourly pay
    Weekly pay
    Full time
    Monday to Friday
    Shift work
    Day shift

    Surface Engineering

    Sunnyvale, CA
    20 hours ago
  • HCLTech is seeking a Senior 5 Axis CNC Machinist in Mountain View, California, to fabricate precision parts using advanced CNC machinery and equipment. The ideal candidate will have a strong understanding of machining processes and the ability to manage multiple projects...

    HCLTech

    Mountain View, CA
    20 hours ago
  • $27 - $35 per hour

     ...Manual Machinist in Newark The Manual Machinist sets up and operates a variety of manual machining equipment to produce precision parts according to detailed specifications. This role requires strong blueprint reading skills, a solid understanding of machining processes... 
    Contract work
    Temporary work
    Monday to Friday
    Shift work

    Aerotek

    Newark, CA
    10 hours ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Robot Operator. Be the first to apply!