Equipment Operator
GFL Environmental USA Inc.
Safely operate and/or have the ability to operate various equipment including forklift, bobcat, backhoe, track hoe, compactor and/or steer equipment to bale, load and move waste material.
Key Responsibilities:
• Operate necessary equipment to bale and load waste material into trailers.
• Perform inspection and maintenance checks of equipment daily.
• Grease/lubricate equipment, check and add fluids to equipment daily
• Operator will steer, guide and or drive the above listed equipment at the assigned site, if the equipment is used at the particular site(s) using steering wheel, shifters, levers, buttons and pedals.
• Operator will substitute for another operator if someone is absent from the work crew or as needed/required.
• Operator will clean trash from tracks of heavy equipment by pulling and or cutting material away from tracks and gear mechanisms at least once daily or more if needed.
• Operator will use a two-way radio to communicate with co-workers in the field and or office regarding work activities, Requirements: and priorities for the work day.
• Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors.
• Maintain appearance of the grounds and facility.
• Attend safety and branch meetings.
• Perform other duties and responsibilities as required or requested by management.
• High school diploma or general education degree (GED) desired, but not required.
• Completion of forklift certification.
• Ability to obtain Transfer Station / Landfill Operations Certification if needed.
• Operate excavator, forklift/bobcat, front-loader, baler, backhoe, track hoe, bull dozer, compactor and/or steer equipment, safety shoes and eye protection. Knowledge, Skills and Abilities:
• Demonstrate ability to follow instructions and work under little supervision.
• Apply commonsense understanding to deal with problems involving several concrete variables in a standardized setting
• Ability to perform the four basic functions of math and to be able to read and understand the meaning of equipment gauges.
• Must have the ability to read, speak, understand and write the English language.
• Must be able to frequently lift/push/pull up to 25 pounds and occasionally lift/push/pull up to 50 pounds.
• Work in outdoor environment 100% of the time. Physical/Mental Demands:
• Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell.
• Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
• Must be able to frequently lift/push/pull up to 25 pounds and occasionally lift/push/pull up to 50 pounds. Working Conditions:
• Constantly exposed to loud noise, humidity, outside weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles
• Work environment is usually moderate to loud.
• Work in outdoor environment inside heavy equipment covered cab, but exposed to all weather conditions, except lightning storms.
• Occasionally work in high precarious places.
• Work in outdoor environment 100% of the time.
We thank you for your interest. Only those selected for an interview will be contacted.
GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact
Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date.
This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.
- Job Description Location: Toledo, OH Cleveland-Cliffs has an immediate opportunity for Mobile Equipment Operator at our Toledo, OH HBI plant. The Mobile Equipment Operator is responsible for operating various mobile equipment across the site on a rotating shift.This...SuggestedFull timeFor contractorsImmediate startShift workRotating shift
$27 - $29 per hour
...Class B CDL DriverClean Harbors in Monroe, MI is seeking a Class B CDL Driver to operate light and heavy-duty trucks/work equipment at our customer sites; some of the vehicles operated include Vacuum Trailer, roll-off trailers, van trailers, box trucks and high-powered...SuggestedDaily paidFull timeLocal areaMonday to Friday- ...loads safely and efficiently. Key Responsibilities: Safely operate heavy haul trucks to transport oversized and overweight loads.... ...regulations. Ability to operate and maintain heavy haul equipment. Excellent problem-solving skills and attention to detail....SuggestedFull time
$2,000 per week
...truck parking (with authorized agreement) Home Time, Route, & Schedule Home most weekends Mostly running in the Midwest Equipment Tractor Trailer End Dump Peterbilts & Macks Offer newer, state-of-the-art equipment with safety features, electronic logs...SuggestedWeekly pay$16.5 - $18 per hour
...Join a family-owned and operated company where your skills make a difference every day. U Pull R Parts offers a supportive team environment... ...focused on safety, cleanliness, and efficiency. As a Heavy Equipment Operator, you will play a key role in our vehicle dismantling...SuggestedHourly payFull timeFlexible hoursWeekend work- .... What You’ll Do: Haul asphalt, stone, millings, and dirt in tandem & tri-axle dump trucks. Pull tag trailers with heavy equipment. Work 5 days a week, ~6AM start, 40–60 hours/week (rare Saturdays). Occasionally assist with unloading or equipment cleanup....Weekly payLocal areaWeekend work
$24 - $25.5 per hour
...CDL B Operator Get Out of the Same Old Driving Job If you're a CDL B driver who wants more than just sitting behind the... ..., and essential to the job. You'll run specialized industrial equipment, work on active job sites, and be part of a crew that gets the...Hourly payNight shiftEarly shift- ...Steel company, is seeking a dedicated, experienced Tube Mill Operator to join our team in Erie, MI, as we consider adding additional... ...verbal instructions ~ Must be able to read measuring devices/equipment ~ Forklift/Overhead crane experience, (preferred) ~ High School...Flexible hoursShift workNight shiftAfternoon shift
- ...Material Handler OperatorA Material Handler Operator handles, moves and stores various non-hazardous and hazardous materials within... ...heavy materials.Able to use and maintain appropriate tools and equipment.Able to lift and carry objects up to 50 pounds.Able to work inside...Afternoon shift
$26 - $32 per hour
...the career opportunity for you! For over 100 years, we’ve manufactured high-quality products right here in the USA. We still operate out of our Oregon-based factory to this day, producing innovative, battle-proven optics for the world's most relentless hunters, shooters...RelocationMonday to FridayShift work- ...supervisor of any damage. Stage part for delivery driver. Operate a forklift or order selector to transport parts in and about... ...familiar with the company's products, locations, machines and equipment, operating methods, and to attain proficiency requirements and...Temporary workImmediate startMonday to FridayNight shift
$18 - $20 per hour
...Looking for an experienced overhead crane operator with commitment to work and good attendance. Hours are 5am-1:30pm Rate of pay... ...- Experience operating overhead cranes or similar heavy equipment - Proficient in the safe and efficient operation of overhead...- ...Boiler OperatorBoiler Operators will generally be responsible for operating and performing routine maintenance and repair on all equipment within the powerhouse except for new installations, mechanical and electrical. Boiler Operators will operate and maintain steam boilers...For contractorsShift work
$18 per hour
...paid vacation and sick time. Position Summary Burn Table Operators must comply with all safety guidelines and have an eye for detail... ...tolerances using a tape measure • Operate basic measuring equipment (tape measure and calipers) • Troubleshoot equipment and make...Local areaAll shiftsShift work- ...products to the automotive industry is seeking several Production Operators for the manufacturing operations in Oregon, Ohio.The... ...production as scheduled (start of shift).Ensures all manufacturing equipment is safe to operate and all guards and stop buttons are functioning...Hourly payTemporary workShift workNight shift
$20 - $21 per hour
...Now hiring for a Production Operator Location: Toledo, OH Pay Rate: $20.00 - $21.00 per hour Shift: 1st Shift | 8:00 AM - 5:00 PM Run... ...production moving? This opportunity lets you operate manufacturing equipment, monitor product quality, and help produce consistent results...Hourly payWeekly payFor contractorsLocal areaImmediate startShift workDay shift- ...CMM Programmers/OperatorsCMM Programmers/Operators are highly skilled employees responsible for operating/programming a Coordinate Measuring Machine (CMM) and various other measurement equipment in an automotive manufacturing plant. The work requires practical skill and...Shift work
- ...Production OperatorThe Production Operator is responsible for operating and monitoring production equipment to support efficient manufacturing operations while maintaining quality and safety standards. Responsibilities include assembly, machine operation, loading and unloading...Local areaShift work
- ...west coast. They have a long history of offering a wide range of equipment and services. Their products are used in a variety of... ...solutions.Essential Job Functions - Responsibilities:Set up and operate manual and CNC equipment such as mills, lathes, and grinders to...Permanent employmentTemporary workApprenticeshipLocal areaRelocation packageMonday to Friday
$21 per hour
...Pioneer, Ohio.Toledo Tool & Die is adding Production (Laser) Operator to our team to support our continued growth.The Production (Laser... ...weekends and holidays).Experience operating large industrial equipment is preferred.Must be able to work in a dynamic and fast paced...Full timeImmediate startShift workWeekend workDay shiftAfternoon shift$26 per hour
...three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and... ...sludge, dewatering treatment, processing, disposal and testing equipment in refinery/industrial facility to purify water to meet customer...- ...generation family-owned company , is seeking an experienced Asphalt Mill Operator . Work is local in NW Ohio & SE Michigan , with steady hours during the paving season and modern equipment. What You’ll Do: Operate a new CAT 6.5’ 800 HP asphalt mill (automatic...Weekly payLocal areaWeekend work
- ...Job Description Job Description Food Manufacturing Machine Operator Now Hiring – 1st & 2nd Shift Monroe, MI $18.50/Hr -... ...team. If you have experience operating packaging or production equipment in a food manufacturing environment and enjoy working in a fast...Weekly payImmediate startWeekend workDay shiftAfternoon shift
$11.25 - $13.2 per hour
...clutter-free environment. Major Activities Adhere to Standard Operating Procedures (SOP’s) and Company programs to ensure compliance... ...and basic measuring skills ability to operate the framing equipment and glass cutter Preferred Type of experience the job...Full timeLocal areaFlexible hoursNight shiftEarly shift$15.75 - $16.75 per hour
Job Description - Overview Hobby Lobby is seeking organized, customer service oriented people to join our team as a Framer. We need enthusiastic individuals who are motivated, responsible, and have the drive to make the most of a career with us. We are an EXCITING,...Hourly payFull timePart timeSeasonal workFlexible hours$90k - $100k
...above and beyond to serve them. As an Application Engineer, you’ll work with manufacturing companies every day to help improve their operations. Our optimization strategies help our customers find the best ways to increase efficiency within their operations. We employ a...$70k - $80k
...$70,000-$80,000 Requirements Minimum 2 years of machining experience Experience operating mills, lathes, or grinders Responsibilities Set up and program CNC machines Operate CNC equipment including CNC turning centers, 3-axis and 5-axismachining centers, CNC grinders Why...Full timeTemporary workShift workNight shiftDay shiftAfternoon shift$27 - $33 per hour
...Directional Drill Operator/LocatorAt MasTec Communications Group we build for the future. Yours and ours. As a Directional Drill Operator... ...the daylighting of these facilitiesTransport heavy equipment to and from the job site each dayQualifications About You: Safety...Hourly payPermanent employmentLocal areaFlexible hours$26 - $28 per hour
...background in CNC machinery, with hands-on experience setting up and operating machinery to make custom parts for tooling systems. As a CNC... ...will be responsible for maintaining, setting up, and running equipment efficiently to maximize machine utilization and ensure our...Hourly payFull timeApprenticeshipRelocation packageMonday to FridayFlexible hoursShift workDay shiftAfternoon shift$24.14 per hour
...Job Description Job Description Job Posting TitleFixed Line Operator (Bus Driver) Job Description Join TARTA as a Fixed-Line Operator Starting Pay: $24.14/hour + Overtime Opportunities Now Hiring for Our October 2026 Class! Are you seeking a stable and...Hourly payApprenticeshipImmediate startShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Equipment Operator. Be the first to apply!



