MECHANICAL ENGINEER Jobs
Navstar
Duties
Combination of education and experience -- college-level education Degree: Engineering.
OR
Leading to a bachelor's degree in a school of engineering with at least one program accredited by ABET;
OR
Include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Training, and/or technical experience that furnish
1. A thorough knowledge of the physical and mathematical sciences underlying engineering.
2. A good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
You may qualify if you meet one of the following: GS-07:
You must have completed a 4-year course of study leading to a bachelor's from an accredited institution AND must have documented Superior Academic Achievement (SAA) or one year of specialized experience equivalent to at least a GS-05 at the undergraduate level in one of the following:
A) Class Standing - upper third of the graduating class based on completed courses in the college, university, or major subdivision
B) Grade Point Average - 2.95 or higher out of a possible 4.0 as recorded on your official transcript or as computed based on 4 years of education or as computed based on courses completed during the final 2 years of curriculum; OR 3.45 or higher out of a possible 4.0 based on the average of the required courses completed in your major field or the required courses in your major field completed during the final 2 years of your curriculum. If more than 10 percent of total undergraduate credit hours are non-graded, i.e. pass/fail, CLEP, CCAF, DANTES, military credit, etc., you cannot qualify based on GPA
C) Election to membership in a national scholastic honor society (note: freshman honor society cannot be used to meet the requirements of this position). (If qualifying based on class standing or honor society membership, provide appropriate documentation). GS-09:
You have one full year (18 semester hours or the equivalent) of graduate level study, or possess a master's or higher degree, e.g., LL.B., J.D., LL.M., Ph.D., in a field that provided the knowledge, skills, and abilities to do the work of this position. Such fields include business administration, industrial management, industrial engineering, industrial psychology, public administration, political science, or government. (Submit copy of transcripts).
OR
You have at least one year (12 months) of specialized experience, that provided knowledge of to perform successfully the duties of the position. To be creditable, specialized experience must have been equivalent to at least the next lower qualifying pay band or equivalent grade under the General Schedule (GS) or other pay systems. Equivalent experience may be at the level of the lowest GS grade covered by the applicable pay band; however, the experience must demonstrate KSA's to successfully perform the duties of the position being filled.
OR
You must have a combination of graduate education as described above and the type of specialized experience as described above, which when combined would equate to 100%. (To compute, first determine your total qualifying graduate level education as a percentage of the graduate education required; then determine your total qualifying experience as a percentage of experience described above; add the two percentages. The total percentage must equal to at least 100%.) (Submit a copy of your transcript.) Additional information This position is covered by the Department of Defense Priority Placement Program. Several vacancies may be filled. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: . Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
- You will serve as a Mechanical Engineer in the Military Sealift Command (MSC), Engineering Department (N7), Life Cycle Management Division (N75).
- You will manage the ships life cycle plan by planning, directing and coordinating the maintenance and repair activities requiring industrial assistance for assigned ships.
- You will determine, plan, and schedule technical work requirements for availabilities for assigned ships.
- You will ensure that previous post availability analysis and recommendations are incorporated in current availability planning.
- You will regularly conduct ship checks to verify the work item technical requirements.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- You will be required to obtain and maintain a U.S. Passport.
- Experience applying marine and mechanical engineering principles when gathering data for reports.
- Experience assisting with technical aspects of the marine or mechanical engineering discipline projects.
- Experience supporting field inspections to determine maintenance capabilities.
- Experience reviewing plans, specifications and preliminary engineering reports and design drawings.
- Experience communicating orally and in writing on a range of engineering matters.
Combination of education and experience -- college-level education Degree: Engineering.
OR
Leading to a bachelor's degree in a school of engineering with at least one program accredited by ABET;
OR
Include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Training, and/or technical experience that furnish
1. A thorough knowledge of the physical and mathematical sciences underlying engineering.
2. A good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
You may qualify if you meet one of the following: GS-07:
You must have completed a 4-year course of study leading to a bachelor's from an accredited institution AND must have documented Superior Academic Achievement (SAA) or one year of specialized experience equivalent to at least a GS-05 at the undergraduate level in one of the following:
A) Class Standing - upper third of the graduating class based on completed courses in the college, university, or major subdivision
B) Grade Point Average - 2.95 or higher out of a possible 4.0 as recorded on your official transcript or as computed based on 4 years of education or as computed based on courses completed during the final 2 years of curriculum; OR 3.45 or higher out of a possible 4.0 based on the average of the required courses completed in your major field or the required courses in your major field completed during the final 2 years of your curriculum. If more than 10 percent of total undergraduate credit hours are non-graded, i.e. pass/fail, CLEP, CCAF, DANTES, military credit, etc., you cannot qualify based on GPA
C) Election to membership in a national scholastic honor society (note: freshman honor society cannot be used to meet the requirements of this position). (If qualifying based on class standing or honor society membership, provide appropriate documentation). GS-09:
You have one full year (18 semester hours or the equivalent) of graduate level study, or possess a master's or higher degree, e.g., LL.B., J.D., LL.M., Ph.D., in a field that provided the knowledge, skills, and abilities to do the work of this position. Such fields include business administration, industrial management, industrial engineering, industrial psychology, public administration, political science, or government. (Submit copy of transcripts).
OR
You have at least one year (12 months) of specialized experience, that provided knowledge of to perform successfully the duties of the position. To be creditable, specialized experience must have been equivalent to at least the next lower qualifying pay band or equivalent grade under the General Schedule (GS) or other pay systems. Equivalent experience may be at the level of the lowest GS grade covered by the applicable pay band; however, the experience must demonstrate KSA's to successfully perform the duties of the position being filled.
OR
You must have a combination of graduate education as described above and the type of specialized experience as described above, which when combined would equate to 100%. (To compute, first determine your total qualifying graduate level education as a percentage of the graduate education required; then determine your total qualifying experience as a percentage of experience described above; add the two percentages. The total percentage must equal to at least 100%.) (Submit a copy of your transcript.) Additional information This position is covered by the Department of Defense Priority Placement Program. Several vacancies may be filled. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: . Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the MECHANICAL ENGINEER Jobs in Norfolk, VA vacancy
- ...Company Description As a global engineering solutions firm that plays a leading role in the areas of... ...engineering, procurement and construction (EPC). Job Summary We are seeking a detail-oriented and proactive Mechanical Construction Engineer to join our project. The...SuggestedContract workFor subcontractorWork at office
- ...Mechanical Engineer Full Time Professional Norfolk, VA, US 2 days ago Requisition ID: 1073 Position Title: Mechanical Engineer Clearance Requirement: SECRET Clearance – TS/SCI Eligible Status: This position is contingent upon award Endurion is seeking a Mechanical Engineer...SuggestedFull time
- ...making a difference on a worthy mission. Description The Mechanical Engineer is primarily responsible for leading new product development... ...cannot identify all the skills a position may require since job responsibilities and the Company's needs may change over time...SuggestedFull timeTemporary workPart timeWork experience placementLocal area
- ...Job Opportunity This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered...Suggested
- ...where every level leads and matters. We are seeking a skilled Mechanical Engineer to design, develop, validate, and support production of... ...employment, candidates will be required to complete additional job‑related screening processes as permitted or required by applicable...SuggestedShift work
$81.77k - $134.91k
...unmatched experience for both our clients and our team. As a global engineering and construction firm, we partner with clients worldwide to... ...anticipate tomorrow’s demands. We’re looking for a skilled Mechanical Engineer with expertise in HVAC and plumbing systems. This...Work at officeLocal areaRemote workWork from homeWorldwide- ...You will serve as a principal port engineer for assigned ocean-going vessels, including... ...clearance may result in the withdrawal of a job offer or removal. This position may require... ...(stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e)...Full timeContract workPart timeInterim roleInternshipWork at officeLocal areaImmediate startRemote workWorldwideNight shift
- ...Principal Port Engineer You will serve as a principal port engineer for assigned ocean-going vessels, including those powered by steam and/or diesel and/or gas turbine. You will determine, plan, and schedule all technical work requirements for all availabilities...Contract workWorldwide
- ...Description: Designs and develops machines for mechanical systems by performing the following... ...Throughout development, the senior mechanical engineer works with designers and junior engineers... ...Able to work and adapt to the changes of job priorities to fulfill the business needs....
- ...Mechanical Sales Engineer Our client is hiring a Mechanical Sales Engineer to support commercial and industrial projects across the Hampton Roads market. This role will focus on project sales, design-assist, and preconstruction support for special projects up to $2M...For contractors
- ...Engineer Mech Sr SSI is seeking an Engineer Mech Sr to work onsite at a Navy program in Norfolk, VA. Duties and responsibilities... ...technical support in the principles, techniques and practices of mechanical engineering, electrical/electronics engineering and/or naval...Contract workTemporary work
- ...schedule. Career development opportunities, including on-the-job training, tuition reimbursement, and networking. A positive work... ...employees are respected, supported, and engaged. Description Mechanical engineers research, develop, design, manufacture, and test tools,...Contract work
- ...The Opportunity Mechanical Engineer Design the Facilities That Support Our Nation's Most Critical Missions At RS&H, our work goes far beyond building systems—we design the environments that enable national defense, scientific discovery, and essential government operations...Permanent employment
- ...If you love high profile and challenging programs and Marine Engineering projects supporting the U.S. Navy and commercial customers – Serco... ...not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic...Full timeContract workPart timeLocal areaFlexible hours
- ...To be a partner that you can count on to engineer solutions for the challenges of today and... ...May require some traveling to customer job site to evaluate problems and report back... ...knowledge and demonstrated abilities utilizing mechanical knowledge: Specific applications combined...Temporary workWork at officeFlexible hours
- ...leading staffing agency is seeking a Waterfront Engineer for a government contractor in Chesapeake, VA. The role involves addressing mechanical problems with submarines, collaborating... ...'s degree in mechanical engineering. This job offers an exciting opportunity in a...For contractors
- ...effectively and efficiently. We're looking for talented Marine Engineer to join our Team, located out of our Chesapeake, VA office.... ...Marine Engineering, Naval Architecture, Electrical Engineering, or Mechanical Engineering If no degree, 12 years of equivalent technical...Work at office
$140k - $150k
...RiverTech is looking for a Marine Engineer to work in Norfolk, VA. The U.S. Coast Guard Surface... ...) located in Norfolk, VA provides Hull, Mechanical, and Electrical (HM&E) engineering,... ...(Logistics) is highly desirable. Job ID 2026-23938 Work Type On-Site...Full timeContract workPart timeFor contractorsWork at officeRemote work- ...effectively and efficiently. We're looking for talented Senior Marine Engineers who will be responsible for coordinating and overseeing the... ...Engineering, Naval Architecture, Electrical Engineering, or Mechanical Engineering ~4 years of experience serving aboard commercial...Temporary workWork at office
- ...SEACORP is seeking a well-qualified Mechanical Engineering Manager . Primary Duties and Responsibilities: Job Summary: SEACORP is seeking a Mechanical Engineering Manager to lead technical teams in the design, development, and integration of maritime electronic systems...Contract workTemporary workWork at officeLocal area
- ...Overview Mechanical Engineering Opportunity at DLBA Naval Architects – A Division of Gibbs & Cox. DLBA Naval Architects is a leading naval architecture and marine engineering firm, now a division of Leidos Gibbs & Cox. DLBA offers innovative consulting services for designing...
- ...Assistant Engineer Savage is a global provider of supply chain infrastructure and logistics... ...Key responsibilities involve maintaining mechanical, electrical, and hydraulic systems, from... ...the tug and barge. Responsibilities / Job Duties: Assisting the Chief...Full timePart time
$120k - $145k
...Job Type Full-time Description $120,000 - $145,000 per year Sign... ...a Senior Naval Architect to support the Engineering Design Team (EDT) in delivering high-... ...accredited naval architecture program (Mechanical Engineering degrees will not be considered...Full timeContract workRelocation package$65k
...to providing competitive compensation for this role. The actual offer will be based on various factors, including but not limited to: job related knowledge, skills, experience, relevant certifications and qualifications. This position is paid on a commission/ flag...Minimum wageFull timeApprenticeshipLocal areaRemote work$85.7k - $107.12k
...Company: MCA - Alpolic Job Description: The Mechanical / Reliability Engineer is responsible for improving the reliability, performance, and lifecycle of manufacturing equipment across ALPOLIC’s production operations. This role focuses on root cause analysis,...Work experience placementWeekend work- ...targets O&M technical, logistics and other engineering support; systems integration;... ...standards and best practices. The following job functions are basic requirements (but other... ...and software to pinpoint problems with mechanical, electrical, and hydraulic systems....For contractorsWork experience placementCurrently hiringFlexible hoursDay shiftAfternoon shift
- ...Job Description Mechanical Project Manager An employee-owned, nationally recognized mechanical construction and facilities services... ...including HVAC, plumbing, controls/building automation, engineering services, and prefabrication support. Projects include...For contractorsFor subcontractor
- ...GDIT is looking for a talented and experienced Project Controls Engineer who can lead the development and management of the program master schedule for a large complex program, including complete cost & schedule integration aligned with the contractual scope awarded....Work at officeLocal area
- ...We are seeking a highly motivated and detail-oriented Process Engineer to join our team. This role is responsible for developing, optimizing... ...we cannot identify all the skills a position may require since job responsibilities and the Company's needs may change over time....Full timeTemporary workPart timeWork experience placementWork at officeLocal area
- ...Job Description The Project Engineer has mastery of at least one core engineering principle and advanced knowledge of related engineering fields... ...Responsibilities REQUIRED ~ Bachelor of Science degree in Mechanical Engineering or Equivalent experience, from an...Work at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MECHANICAL ENGINEER Jobs. Be the first to apply!



