Calibration Engineer
GE Healthcare
MR Calibration Engineer
As an MR Calibration Engineer, you will perform Calibration and Service on our life-changing medical equipment for the MR modality. After completion of accelerated GEHC MR Trainings and On the Job Training, you will lead and be the Subject Matter Expert (SME) on Calibration of MR Systems and Upgrades with MRFEs. You are the primary GE HealthCare's face to the customer throughout the Calibration phase. You are responsible for calibrating, testing, and troubleshooting of MR equipment during installation phase and drive customer satisfaction. This role requires the candidate to work onsite at customer locations. To provide onsite customer support, a company car will be provided, and the candidate needs to be willing to work in the Fort Wayne IN area as well as extended travel outside of the area.
Roles and Responsibilities:
- Under minimal supervision, serve as GE HealthCare's calibration engineer to assigned customers to lead, troubleshoot and complete Calibration of designated MR systems and New Product Introduction (NPI) in a timely manner.
- Maintain tools and test equipment properly and ensuring they are calibrated.
- Proactively engage and communicate with Account Community to ensure they are aware of status of calibration throughout the phase for their designated customers.
- Keep up to date on administrative responsibilities such as maintaining timely closure of all Service Activities in a timely manner.
- Utilize the GEHC escalation process, as needed, and work closely with region and national support to define and implement corrective action plans to resolve system issues in a timely manner.
- When not scheduled for Calibrations, support the local service teams with Service calls, Preventative Maintenance and Field Modification Instruction as needed.
- May assist and/or train less experienced MR Field Engineers during Calibration.
Required Qualifications:
- Bachelor's or Associate's degree in Electrical Engineering, Mechanical Engineering, Biomedical Engineering, or related field; or Military Externship Program; or High School Diploma/GED and a minimum 4 years of experience servicing electronic equipment.
- Experience interfacing with both internal team members and external customers as part of a solution-based process.
- Experience with Web applications as well as Microsoft suite of products.
- Must comply with vendor credentialing requirements
- Must have and maintain a valid Driver's License.
- Willingness to be available after hours, occasional weekends for critical issues as necessary.
- Up to 50% overnight travel required. Dependent on geographical location or the need of the business.
- Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.
Special Physical Requirements:
- Able to lift, carry, push, and pull up to 35 lbs. unassisted and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit and stand for long periods of time.
- Able reach at, above and below shoulder level, flex/extend neck and have good hand and finger dexterity.
- Specific vision abilities required by this job may include color, close vision, distance vision, peripheral vision, and depth perception.
- Candidate MUST seek assistance from another GEHC employee if there are no lift aids available and the item is greater than 50 lbs.
Desired Qualifications:
- Soldering experience.
- Ability to work with limited supervision.
- Highly organized with ability to manage own schedule.
- Experience working with project managers.
- Experience reading blueprints, equipment schematics.
- Adaptability.
- Strong problem-solving skills.
GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.
Relocation Assistance Provided: Yes
- ...Westminster, CO and Austin, TX A fast-growing aerospace communications company is seeking a Calibration Engineer to support the calibration, maintenance, and continuous improvement of precision test equipment used to develop next-generation spacecraft and satellite...SuggestedFull time
- ...Title: OBD Tuning Engineer/Calibration engineer Work Location : Columbus, In Years Of Experience : 3 to 5 Year Onsite OBD Tuning Engineer/Calibration engineer Good with MATLAB/Simulink /Model in Loop Core2 , Autosar Software Application layer model...Suggested
- ...Calibration Technician: Essential Job Function: Travel requirement is up to 80% (half of it local, rest overnight) to customer sites... ...desirable. General Information: Two-year degree in engineering technology or 5 to 7 years of related experience. Technical skills...SuggestedFull timeContract workLocal areaNight shift
- ...Join to save Calibration Engineer at Millennium Software and Staffing Inc Technical Recruiter at Millennium Software and Staffing We have role of Calibration Engineer for our client in Chelsea, MI. Required skills - Seniority level Associate Employment type Contract Industries...SuggestedContract work
- ...Calibration Engineer – Monroe, MI Provide ride development engineering support of passive, passive plus, semi-active & advanced electronic ride control products for original equipment (OE) business groups. Scope will include passive damping and electrical controls...Suggested
- ...Our client is seeking a Calibration Engineer to join their team. As a Calibration Engineer, you will be part of the engineering organization supporting propulsion calibration activities. The ideal candidate will bring strong control and calibration experience, a solid...Weekly payTemporary workFor contractorsRelocationFlexible hours
- ...Calibration Engineer Opportunity Join us in Columbus, IN for a long-term position where your expertise in Aftertreatment Software (AT) controls and diagnostic features will shine. Your role involves providing crucial inputs to customers for calibration development,...
$94k - $112k
...passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a detail-oriented Calibration Engineer to join our Quality Engineering Team at CesiumAstro. In this role, you will be responsible for ensuring the accuracy and...Permanent employmentFull timeContract workWork experience placementWork at officeLocal area- ...Role description Description: Calibration of engine controls for North America and global markets Complete engine calibration in accordance with procedures to meet regulations and other performance targets (emission, fuel economy, power, drivability and OBD...
$146k - $194k
...vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE JOB We are looking for a Calibration Engineer to drive improvements to our internal calibration program in Costa Mesa, CA . This role will be on the Quality...Full timeWork experience placementImmediate start$90k
...members to contribute in a larger capacity than is possible in typical positions.Position DescriptionApplied Medical is seeking a calibration engineer to maintain and advance the calibration program supporting inspection, measurement, and test equipment used throughout...Local area- ...vehicles in 27 countries and effectively markets them across over 170 countries and regions worldwide. Position: Calibration Engineer Location: Ann Arbor, MI 48105 Duration: 12 Months Job Type: Temporary Assignment Work Type:Onsite Job Description...Temporary workWorldwide
- ...Powertrain Calibration Engineer Auburn Hills, Michigan, United States We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric...For contractors
$50 - $80 per hour
...Job Title: Calibration Engineer Location: Agoura Hills, CA Duration: 12 month (Temp to Perm) Payrate: $50 to $80 per hour Job Description: The Hardware Engineering team is looking for a highly-motivated, energetic, technically driven Calibration...Hourly payPermanent employmentTemporary work- Engine Calibration Calibration of engine controls for North America and global markets. Complete engine calibration in accordance with procedures to meet regulations and other performance targets (emission, fuel economy, power, drivability…
- ...Job-ID Reference JOB ID: TYARD Job Title: Calibration Engineer Duration: 12 M+ Location: Ann Arbor, MI - 48105 Company Background: Our client, a major employer in the area, is looking for a Calibration Engineer to be part of its team in its North American operations...
- ...Calibration Engineer Location: Columbus, IN & Detroit, MI Must Have Technical/Functional Skills Expertise in CAN J1939 communication protocol. Must be able to understand and interpret J1939 messaging. Basic understanding of how control system function....
- ...Hybrid Emissions Calibration Engineer Location: Auburn Hills, MI Physical Location: Chrysler Headquarters & Tech Center 1-3 years of experience Description: Percent Travel: 10-30% Job Description: The Calibration System Integration Engineer is...
- ...Propulsion Calibration Engineer Position Summary Our client is looking for a highly motivated Propulsion Calibration Engineer. The primary responsibility of this role is to calibrate the engine control systems to meet regulatory emission standards and customer...Full time
$65.1k - $166.2k
...vehicles. Come build what matters. At Ford Vehicle Hardware Engineering (VHE) teams use Design Thinking and User Experience methods... ...is within Vehicle Propulsion Systems Engineering (VPSE). VPSE calibrates integrates and optimizes powertrain control systems for...Full timeImmediate startFlexible hoursShift work- ...# Job Summary This is a full-time position, reporting to the Plant Engineering AD. The Calibration Engineer will be responsible for operational excellence in calibration management both during site build and transitioning into full operations. Working closely...Full timeContract workFor contractors
- ...Senior Calibration Engineer – Xev Powertrain & Vehicle Motion Controls Oshkosh Defense stands behind those who dedicate their lives to protecting others. As an industry-leading tactical vehicle manufacturer, every day we strive to meet or exceed our customers' ever...Worldwide
- ...solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Calibration and Metrology Quality Engineer Job Code: 45675 Job Location: Huntsville, AL Job Schedule: 4/10: Employees work 10 hour days, 4 days a...Local area
$80k - $100k
...LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Validation/Calibration Engineer -- Medical Device / Pharmaceutical Manufacturing to join their team. This is an outstanding opportunity for someone who enjoys bringing...Permanent employmentWork at officeLocal area$30.25 - $38.68 per hour
...mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Travels to customer site for calibration, repair, and technical support when necessary. · Reads quality control manual and testing specifications to obtain data to test...Full time$45k
...Join Our Team as an ADAS Calibration Technician – Drive the Future of Vehicle Safety! Do you love cars? Are you mechanically inclined? Do you love technology? This job is the best of all three! Come and combine your automotive skills with cutting-edge technology. At Bismarck...Full time- ...disruptions and communicate clearly with operators, maintenance, Engineering, Production, and Quality. Food manufacturing, bakery or high-... ..., and related equipment; verify machine settings and calibration. ~ Read electrical schematics & blueprints and PLC logic to...Work at officeFlexible hours
- ...Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense... ...responsible for the Guage Crib. They will be responsible for the calibration and recordkeeping of all Inspection, Measuring and Test...Full time
- ...Bio Medical Equipment Technician (Calibration Engineer) IRI believes in commitment, Integrity and strategic workforce solutions. Integrated Resources, Inc., is led by a seasoned team with combined decades in the industry. We deliver strategic workforce solutions that...
- ...At Roush, we fuse technology and engineering to provide product development solutions to customers in a diverse range of industries.... ...mobile off-road, and stationary off-road equipment.The Senior Calibration Engineer will develop powertrain calibrations for future automotive...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Calibration Engineer. Be the first to apply!
- powertrain calibration engineer United States
- calibration technician United States
- calibration engineer United States
- instrument technician United States
- powertrain calibration engineer
- instrument fitter
- scale calibration technician
- shutdown instrument technician
- entry level instrument technician
- nuclear instrument technician




