CNC Milling Programmer (3rd Shift)
$38 - $42 per hourArch-Medical-Solutions
- Program, set up, and operate CNC milling machines
- Read and interpret blueprints, planning sheets, sketches, and technical data
- Write, edit, and adjust CNC programs (G‑code / M‑code) using Mastercam, SolidWorks , or similar software
- Perform complex machining operations including milling, drilling, boring , and tight‑tolerance work
- Select, preset, and install cutting tools; calculate feeds, speeds, depths, and coolant flow
- Conduct prove‑outs and manual programming during setups
- Troubleshoot machine issues, program errors, tooling problems, and out‑of‑tolerance conditions
- Machine challenging materials including stainless steel, titanium, aluminum, and plastics
- Inspect parts using precision gauges to ensure quality and regulatory compliance
- Train and induct operators after proven setups are complete
- Perform routine machine maintenance and assist with repairs as needed
- Maintain clear documentation and shift handoff notes
- Keep machines, tools, and work areas clean, safe, and audit‑ready
What We’re Looking For
- 7–10 years of CNC machining, setup, and programming experience (or equivalent)
- Strong experience with Milling, Turning, and Swiss machining
- Advanced ability to read and apply GD&T (ASME Y14.5)
- Proven experience adjusting programs and tooling independently
- Deep understanding of cutters, inserts, and tool selection based on material and tolerances
- Knowledge of G‑codes, M‑codes , and CAM software (Mastercam preferred)
- Experience in medical or regulated manufacturing strongly preferred
- Associate degree or technical training helpful—but experience matters most
- Strong communication skills and a calm, solution‑oriented mindset
Shifts Available: 3rd shift
Salary Range: $38.00 - $42.00 per hour, based on experience.
3rd Shift Premium: Employees working 3rd shift may earn up to $43.00 - $48.00 per hour , including shift differential, depending on qualifications and experience.
Programming
Intermediate
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the CNC Milling Programmer (3rd Shift) in Elmhurst, IL vacancy
- ...Arch-Medical-Solutions is seeking an experienced CNC Machinist to program, set up and operate complex milling machines in a regulated medical manufacturing environment. You will read blueprints, edit CNC programs in Mastercam/SolidWorks, and perform prove-outs with tight...Night shift
Arch-Medical-Solutions
Elmhurst, IL5 days ago $42 - $65 per hour
...Full-Time Pay Range: $42 – $65/hr (based on experience) Shift: Day Shift (hours to be confirmed) Overtime: Available Experience... ...’ll Be Doing In this role, you will: Set up and operate CNC mills, lathes, and multi-axis machines Write, edit, and optimize...SuggestedFull timeShift workDay shiftHelander Metal Spinning Company
Addison, ILa month ago- ...ARCH in Elmhurst, IL is seeking an experienced CNC Machinist to program, set up, and operate high‑precision milling and Swiss machines on first shift. You will read detailed drawings, write CNC programs, and troubleshoot complex setups to meet tight tolerances. The...SuggestedDay shift
ARCH
Elmhurst, IL1 day ago $24 - $27.5 per hour
...Position OverviewPower Services Group (PSG) is hiring experienced CNC operators for second-shift opportunities at our Melrose Park facility. Available positions include a Milling Operator and a CNC Lathe Set-Up Operator.These positions are responsible for setting up and...Night shiftHourly payShift workAfternoon shiftPower Plant Services
Melrose Park, IL3 days ago- ...Kelly Services, Inc. - - Responsibilities: Set up and operate CNC mills and/or lathes; read and interpret work instructions and drawings; perform measurements and quality checks; make basic machine adjustments and monitor equipment; maintain a safe organized work areaSuggested
Kelly Services, Inc.
Addison, IL4 days ago $25 - $35 per hour
...Mill Set-up / Operator – 1st OR 2nd Shift This is an exciting opportunity to join a fast-growing Metal Fabrication... ...: Set up and operate CNC milling machines to manufacture precision... ...Communicate effectively with supervisors, programmers, engineers, and team members...Full timeDay shiftAfternoon shiftCypress HCM
Bensenville, IL4 days ago- ...CNC Mill MachinistJoin an award-winning workplace of energetic, talented people, and be on one of the best work teams in the Chicagoland area!We are devoted to having a workplace that supports each of our team members in making high quality products and working together...Day shift
Ace Metal Crafts Company
Bensenville, IL5 days ago - ...CNC Milling MachinistWe are working with a client company in the Chicago Metro Region seeking a CNC Milling Machinist (multiple shifts). This position will offer regular overtime with a growing company that has been in business for over 100 years! Prior experience working...Permanent employmentShift work
gpac
Elmhurst, IL3 days ago $20 - $40 per hour
...Pay Range: $20–$40 per hour (DOE) Shift: Day & Night Shifts Available Overtime... ...and increased demand for large, complex CNC-machined components . At Tech-Max Machine... ...role, you will: Set up and operate CNC Mills and CNC Lathes Load, edit, and verify CNC...Night shiftHourly payPermanent employmentFull timeShift workDay shiftTech-Max
Itasca, IL15 days ago- ...CNC Vertical Milling Machinist / Setup OperatorAn established manufacturer is seeking an experienced CNC Vertical Milling Machinist / Setup Operator with strong hands-on machining and setup capabilities. This position is ideal for a machinist who can independently set...
gpac
Elmhurst, IL3 days ago - ...CNC Vertical Mill MachinistGCM is a global contract manufacturing company with locations in the Silicon Valley, Chicago, North Carolina and China, servicing MedTech, Aerospace, and industrial end-market applications. At GCM, we believe our most valuable assets are our...Contract workApprenticeship
GCM
Addison, IL1 day ago - ...CNC Horizontal Mill MachinistThe CNC Horizontal Mill Machinist is responsible for the machining of products in order to meet customer specifications... ..., and pulling CNC machining programs. The work hours for 2nd shift is 3pm to 11:30 pm with overtime as required.Job...ApprenticeshipAfternoon shift
GCM
Addison, IL1 day ago - Reliance Gear Corporation in Elmhurst, IL seeks a CNC Lathe & Mill Machinist to set up, program, and run Mori Seiki and Doosan machines, reading blueprints and applying proper speeds and feeds. This role demands solid measuring skills and the ability to work from verbal...
$35 per hour
...CNC Mill Machinist 1st Shift (3, 4 & 5-Axis Setup Operator) Starting Pay Rate: Up to $35.00 / hour (Based on experience) Job Type: Full-time, Permanent Location: Schiller Park, IL (Clean, ultra-bright precision job shop) Schedule: 1st Shift | 7:00 AM 3...Hourly payWeekly payPermanent employmentFull timeContract workTemporary workImmediate startMonday to FridayShift workWeekend workDay shiftAfternoon shiftAerotek
Franklin Park, IL11 hours ago- Collabrains is seeking an experienced CNC Programmer / Machinist to join our shop floor in Chicago. You will program, set up, and operate CNC mills and lathes to produce precision parts from engineering drawings. You should have strong hands-on experience, read blueprints...Full time
$25 per hour
TBI Listings Inc. in Elk Grove Village, IL is seeking a CNC Milling Machinist to operate CNC milling machines and contribute to precision manufacturing. This full-time role offers a starting wage of $25 per hour, with additional Saturdays optional and overtime paid at a...Hourly payFull timeMonday to Friday- Astro Craft Inc is hiring a hands-on CNC programmer to support milling and lathe work. Use Mastercam to translate drawings and CAD models into precise parts, covering programming, setup support, and production optimization. Candidates with 1-2 years of programming experience...
$25 - $35 per hour
...Job Description Mill Set-up / Operator – 1st OR 2nd Shift \n \n This is an exciting opportunity to join... ...Responsibilities: \n \n Set up and operate CNC milling machines to manufacture... ...effectively with supervisors, programmers, engineers, and team members...Day shiftAfternoon shiftCypress HCM
Bensenville, IL9 days ago$25 - $35 per hour
...CNC Set-Up Technician/OperatorLocation: Hillside, ILCompensation: $25-$35/hr + 10% shift differential + OT + comprehensive benefits package includedShift: 2nd and 3rd ShiftAbout Us:We have 2 openings for Lead CNC... ...specifications using lathes, milling machines, etc.Measure,...Night shiftMonday to FridayShift workAfternoon shiftStaff Financial Group
Hillside, IL4 days ago$30 - $35 per hour
We are looking for an experienced CNC Programmer / Machinist with strong hands-on experience operating and programming both CNC Mills and Lathes . Requirements 5+ years of CNC machining experience Strong experience with both CNC Mills and CNC Lathes Ability to program...Hourly payFull time$28 - $36 per hour
...CNC Programmers Team (Northbrook, IL) Our client is hiring several CNC PROGRAMMERS, varying shifts, starting as Kelly Engineering Project Service Consultants... ...Shift, 2:00pm to 10:30pm, 3rd Shift, 10:00pm to 6:30am.... ...and set up CNC machines (mills, lathes, etc.) for...Night shiftHourly payPermanent employmentContract workShift workDay shiftAfternoon shiftKelly Services-Portugal
Northbrook, IL3 days ago$51.5k - $61.67k
...CNC Cell Machinist Setup & Operator (Mori Seiki & Doosan) Location: Hillside, IL Shift Options: ~1st Shift: 6:00 AM 2:30 PM | Monday... ...30 PM | Monday Friday ~3rd Shift: 10:00 PM 6:30 AM |... ...within a lean, cell-based milling and turning production setup...Night shiftHourly payWeekly payPermanent employmentFull timeImmediate startMonday to FridayAll shiftsShift workDay shiftAfternoon shiftAerotek
Hillside, IL2 days ago$32 - $40 per hour
...tolerances Load and troubleshoot CNC programs (G‑code / M‑code;... ...clean, safe work area Document shift handoffs clearly and professionally... ...a plus) Strong experience with milling, turning, and/or Swiss... ...oriented mindset Shifts Available: 3rd shift Salary Range: $32.00 - $4...Night shiftShift work$70k - $110k
...Company Overview: Integra & L.G. Evans is a CNC Machine Tool Dealer and Engineering firm... ...experienced repairmen/women, machinists, programmers, or engineers interested in becoming a... ...individual with experience on 3- and 5-axis milling centers, interested in growing their...Night shiftFull timeWork at officeLocal areaMonday to FridayFlexible hoursL.G. Evans
Chicago, IL5 days ago- Aerotek - - Responsibilities: Advanced CNC mill setups and 5-axis operation; Program editing and on-machine adjustments; First-part and in-process inspection; Manage high-mix workflow across multiple machines; Select feeds, speeds and tooling for hard materials
Aerotek
Schiller Park, IL4 days ago - ...Aerotek - - Responsibilities: Independently set up complex CNC mill setups; Read and optimize CNC programs at the machine; Interpret GD&T drawings and perform first-part inspections; Manage high-mix workload across multiple machines; Optimize feeds and speeds for tool...
Aerotek
Schiller Park, IL4 days ago - ...nVenia, part of the Duravant family of companies, seeks a mid-level CNC Programmer to develop and refine CNC programs for mills, lathes, and routers. You will collaborate with engineering and production to improve machining efficiency and ensure high-quality outcomes....
Nvenia
Wood Dale, IL3 days ago $25 - $35 per hour
...Range: $25.00 – $35.00/hour (based on experience) Shift: 1st, 2nd, & 3rd Shift Shift Differential: 2nd & 3rd Shift - 10% Machine Experience: Swiss, mill, or lathe Experience Level: Entry–Mid (2+ years CNC machining) --- Why This Role Exists This role...Night shiftFull timeMonday to FridayShift workDay shiftAfternoon shiftViant Medical
Wheeling, IL15 days ago- ...CNC Milling OperatorWe are seeking a CNC Milling Operator to support daily production on approved CNC milling jobs in a precision manufacturing... ...instructions, and supporting quality standards throughout each shift.This is a strong fit for someone with foundational CNC milling...Shift work
New Day Executive Search
Wheeling, IL3 days ago - ...CNC Milling Operator 2The CNC Milling Operator 2 is a mid-level CNC milling operator capable of running established milling jobs with moderate independence. This position requires intermediate inspection ability, general GD&T understanding, and the ability to make tool...
ERA Industries
Elk Grove Village, IL11 hours ago
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Milling Programmer (3rd Shift). Be the first to apply!
Related searches