Repair and Tool Technician
Home Depot
Repair And Tool TechnicianRepair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.City: MarysvilleState: WAJob Type: Store Repair and Tool Technician
$22 per hour
...Repair and Tool Technician | Home DepotRepair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...SuggestedHourly payFull timeTemporary workPart time- CHIPTON-ROSS Inc. is seeking 10 Numerical Control Programmers for a contract opportunity in Everett, WA. This role requires 7+ years of NC programming experience, primarily on 5-axis CNC machines for aerospace parts. The successful candidate will work on creating and verifying...SuggestedFull timeContract workDay shiftAfternoon shift
$23 - $35 per hour
Job TitleLocation 3817 SMITH AVE, Everett, WA, 98201-4547, United StatesBase Pay $23.00 - $35.00 / HourEmployee Type Non-ExemptManage Others NoContact InformationName Rick GeislerPhone (***) ***-**** Ext 125Email ****@*****.*** Requirements SummarySuggestedShift workWeekend work- ...team supporting aerospace structural production in Everett, WA. As a contractor Numerical Control Programmer (NCP) on our Machining/Tooling team, you’ll drive the NC programming, setup documentation, and machining strategy for complex multi-axis parts used on commercial...SuggestedFor contractorsAfternoon shift
- ...Mastercam, and other CAM software for vertical, horizontal, and multi-axis machining centers. · Select appropriate cutting tools, speeds, feeds, fixtures, and machining strategies based on material and design specifications. · Simulate and verify CNC...SuggestedHourly payFull timeWork at officeShift work
- ...Job Description Job Description Primary Responsibilities • Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis). • Interpret engineering drawings, planning documentation,...Contract workFor contractorsAfternoon shift
- ...positions within 4523A. Learn more about this agency Duties Help You will manufacture, assemble, install, remove, and repair ventilation, furnishings, and items including but not limited to nonstructural bulkheads and overheads. You will provide...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
$25 - $29 per hour
...while producing precision aerospace components. ·Inspect finished parts using micrometers, calipers, and other precision measuring tools. ·Perform machine edits, tooling adjustments, deburring, and basic toolmaking as needed. ·Bore jaws on a 3-jaw chuck and...Hourly payWeekly payFull timeTemporary workWork at office$24 - $40 per hour
...diagram form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to use basic hand tools including precision measuring equipment. Must be able to sit or stand for at least 10 hours a day. Ability to frequently lift...Permanent employmentLocal areaImmediate startShift workDay shiftAfternoon shift$30 - $42 per hour
...Abilities - Are you a good fit: Ability to read, analyze, and interpret customer blueprints/specifications, purchase orders, tooling concepts, manufacturing processes, technical procedures, operating instructions, etc. Previous experience programming five-axis...Permanent employmentWork at officeLocal area- Boeing Commercial Airplanes is hiring an Expert Level Automation and Robotic Programmer to support a Production Engineering team in Everett, Renton, or Auburn, WA. The role emphasizes process improvement, factory-floor collaboration, and safety and quality standards. Experience...Contract work
$22 - $32 per hour
...traceability and manage raw materials and finished parts. ·Inspect parts using standard inspection methods and precision measuring tools. ·Perform routine maintenance and keep work areas clean and organized. ·Support tooling, fixtures, and process improvements with...Weekly payFull timeImmediate startShift workWeekend workDay shiftAfternoon shift$125k - $150k
...bathtub and shower replacements, with preferred experience in installing acrylic, quartz, or porcelain wall systems. A valid contractor license is required for this position, and applicants should have their own tools and reliable transportation. #J-18808-Ljbffr Luxury BathFor contractors$45 - $50 per hour
...requirements. Support 3-axis, 4-axis, and 5-axis machining operations from initial concept through production. Select appropriate tooling, fixturing, feeds, and speeds to achieve optimal performance and tool life. Troubleshoot machining, tooling, and production...Weekly payContract workTemporary workWork at officeImmediate start$25 - $45 per hour
...real-time adjustments for quality and efficiency. Inspecting parts using micrometers, bore gauges, calipers, and other precision tools. Creating NC programs to meet customer specs. What You Bring: Experience operating CNC mills and/or CNC lathes or completion...Currently hiringLocal areaAll shiftsShift workWeekend workDay shiftAfternoon shift3 days per week$35 - $50 per hour
..., troubleshoot machining issues, and optimize cycle times Interpret blueprints, engineering drawings, and GD&T Select proper tooling, fixturing, feeds, and speeds Create setup sheets and tooling documentation for operators Maintain CNC program standards and...Currently hiringLocal area- ...floor with mechanics, safety, and equipment services to improve production systems. The ideal candidate has experience with ABB, KUKA, Fanuc robots, RobotStudio, CAD/CAM tools, and proven ability to read drawings and develop machine control data for #J-18808-Ljbffr BoeingContract work
$16.5 - $28 per hour
...policies, procedures, and the Code of Conduct. Primary Responsibilities: Installation and maintenance of tires and wheels; repairing, rotating, and inflating tires; attaching and rebalancing wheels; installing/rebuilding and/or relearning/calibrating TPMS; washing...Minimum wageFull timeTemporary work- ...improve in all areas. Must participate in any lean manufacturing initiatives within the department. Order items through tool stores as required. Maintain chip hoppers and make sure that they do not back up. Actively participate in the Shop...Hourly payFlexible hoursShift workWeekend work
- ...Programmer with 2 years of experience developing programs and strategy to take design data and produce machined parts from mills and live tool lathes. The ideal candidate will have a production background with a balance between speed and quality and reduce machining time....Permanent employment
- ...Tire Shop Associate Balances, installs, and rotates tires. Stocks tires and batteries and repairs tires. Answers questions, makes recommendations, and assists members with purchasing/returning tires and batteries. Provides a high level of member service. Job Duties...Temporary work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- skilled maintenance technician Marysville, WA
- pool repair technician Marysville, WA
- hospital maintenance technician Marysville, WA
- hotel maintenance technician Marysville, WA
- repair technician Marysville, WA
- maintenance mechanic Marysville, WA
- maintenance technician Marysville, WA
- maintainer Marysville, WA
- data center maintenance technician Marysville, WA
- hospital maintenance mechanic Marysville, WA


