Quality Inspector III
Cadrex
Quality Inspector III
Southampton, PA (
Job Type
Full-time
Description
OVERVIEW
Cadrex is searching for a Quality Inspector III to directly support site manufacturing practices through development, evaluation, and continual improvement of processes using quality concepts, principles, and methodologies with the goal of consistently meeting or exceeding customer expectations of quality.
KEY RESPONSIBILITIES
Use measuring devices such as calipers, micrometers, steel rulers, pin gages, surface plate, and height gage
Read and interpret blueprints
Visual inspection of product according to customer requirements
Inspect and or test in-process product as well as finished product
Document inspection results by completing required reports/logs
Identify and quarantine all non-conforming product
Generate and summarize non-conforming reports for discrepant products
Keep measurement equipment operating by following operating instructions and identify and address issues with equipment that may need repair?
Inspect and approve incoming materials where and when needed by confirming they meet specifications
Attend department meetings as required
Inspect and release products for shipping by ensuring proper documentation or certifications are provided as outlined by customer requirements. (Visual & Dimensional verification may be required)
Learn and assist with dimensional verification of PPAP and 1st article parts
Create internal Control Plans in accordance with customer and Advanced Laser requirements
Operate FARO & Micro-Vu measurement equipment
Provide direct support to the production floor by assisting with interpretation and development of manufacturing related documentation and providing proper measuring techniques
Assist with calibration procedures and provide calibration of measuring equipment as outlined by Advanced Laser procedures and ISO Standard
Collaborate with the team for corrective action in reaction to customer complaints, vendor issues, and internal process failures
Ability to successfully work on a team to resolve issues with manufacturing personnel
Operate FARO & Micro-Vu measurement equipment efficiently
Participate in internal process audits including dimensional workmanship and documentation verification
Complete PPAP and 1st article documentation development and processing
Lead and train Level I and II inspectors as needed to increase performance
Train, identify, and implement lean processes and project improvements
Requirements
PREFERRED QUALIFICATIONS
Understand industry safety standards and quality expectations
5 or more years working in a metal fabrication environment under a continuous improvement QMS with hands on inspection preferred
Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
Ability to compute rate, ratio, and percentage and to draw and interpret graphs
Knowledge of word processing software, spreadsheet software, e-mail software and the use of the internet
EDUCATION
High school diploma
Associate degree in related field preferred
LOCATION
- Onsite
SCHEDULE
- M-F; 6:00am - 4:30pm
WORK ENVIRONMENT
- While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud.
PHYSICAL DEMANDS
- While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus.
CADREX’S CORE VALUES
- Safety first, rising to the challenge, collaboration, accountability, and doing the right thing
TOTAL COMPENSATION INCLUDES
Health/dental/vision coverage
Employer-paid and supplemental life insurance
Short- and long-term disability insurance
Generous paid time off and holiday pay
Monthly remote work stipend (for remote employees who qualify)
401(k) investment plan, with an employer match of up to 4%
Education support program
Safety eyeglasses/shoe reimbursement
Referral bonuses
Bonus plan for all full-time employees
ABOUT US
CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace & defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit
Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Export Control Requirements:
Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
Notice of AI Use in Job Application Review
As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate’s qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.
- ...Quality Inspector IIICadrex is searching for a Quality Inspector III to directly support site manufacturing practices through development, evaluation, and continual improvement of processes using quality concepts, principles, and methodologies with the goal of consistently...SuggestedFull timeLocal areaRemote work
$30 - $40 per hour
...application due to a disability, contact this employer to ask for an accommodation or an alternative application process. QUALITY INSPECTOR III Regular Full Time E.F. Precision, LLC, Willow Grove, PA, US 30+ days ago Requisition ID: 1031 Salary Range: $3...SuggestedHourly payFull timeTemporary workLocal areaFlexible hours- ...We are seeking an experienced Quality Inspector to perform First Piece, In-Process, and Final Inspections of precision-machined components in a CNC machining environment. The ideal candidate will have a strong understanding of GD&T, experience with precision measuring...Suggested
$30 - $35 per hour
...Now Hiring: Quality & Line Inspection Specialist (1st Shift) Location: Southampton, PA | Pay: $30.00 - $35.00/hr + Sign-On Bonus! Are you a detail-obsessed quality pro with hands-on line inspection, precision measuring, and root cause analysis experience? Step into a high...SuggestedTemporary workWork experience placementLocal areaImmediate startRelocation packageShift workDay shift- ...Senior Quality Inspector / Quality Control Technician Level 3We manufacture precision components used in medical device, aerospace, defense, space exploration, and advanced technology applications. Our work supports products where accuracy, traceability, and quality are...SuggestedContract workAfternoon shift
- Quality Control Inspector The QC Inspector is responsible for performing and recording inspection data on products produced at our facility. They will ensure proper disposition of any products inspected. They will operate within company procedures and applicable regulations...
- Quality Control Inspector At Klein Tools, curiosity powers discovery, ownership inspires excellence, and urgency means we run towards opportunities. We deliver quality and innovation in everything we do, designing and launching hundreds of groundbreaking products each year...Work experience placementDay shift
- ...Position Summary The Quality Inspector is responsible for performing in-process, and final inspections of fabricated and machined components to verify compliance with drawings, specifications, purchase order requirements, and internal quality standards. This position primarily...
$25 - $30 per hour
...Quality InspectorLocation: Middletown, PAPay Rate: $25 - $30/hr (based on experience)Available Shifts:3rd ShiftSunday - Thursday10:00 PM - 6:00 AMFriday - Sunday6:00 AM - 6:00 PMWork 36 hours and get paid for 40Job OverviewThis position is responsible for ensuring parts...Contract workTemporary workShift work$25 - $27 per hour
...Join to apply for the Production Technician III role at DVM Power + Control Base pay range $25.00/hr - $27.00/hr DVM is a custom switchgear... ...control panels and mission-critical equipment, and perform quality control (QC) and pre-test procedures. This role supports both...Full timeSummer workNight shift- ...The Quality Assurance Inspector will perform a variety of duties related to the control of the incoming product as well as the inspection of the final product prior to shipping. The duties of this position do not require exercising independent judgment. Reports to the...
- ...Summary of the Role: Inspectors will verify the product coming in and the product going out determining if they meet customer requirements... ..., HS diploma or GED required. Minimum 1 year experience in Quality inspection required. Basic blueprint reading skills...Permanent employmentLocal areaFlexible hours
- Job Description Summary: \n \n An Inspector is to maintain quality standards by inspecting incoming materials, in-process production, and finished products; recording quality results. This would be achieved by counting, measuring, and inspecting product to verify that...Shift work
- ...EnerSys Advanced Systems is seeking a Quality Inspector to verify in-process and finished parts against specifications and drawings. You will work with site management to set inspection priorities and support production. Reporting to the Lead Quality Technician, you...
$25 - $30 per hour
Quality Inspector Location: Middletown, PA Pay Rate: $25 - $30/hr (based on experience) Available Shifts: 3rd Shift Sunday - Thursday 10:00 PM - 6:00 AM Friday - Sunday 6:00 AM - 6:00 PM Work 36 hours and get paid for 40 Job Overview This position is responsible...Weekly payContract workTemporary workShift workNight shift$20 - $27 per hour
...Job Description Job Description Quality Inspector EMP Industries, Inc. has an immediate opening for an experienced Full-time, first shift Quality Inspector . We’re looking for someone with a strong work ethic, attention to detail, and the ability to thrive in...Full timeImmediate startDay shift$45k
Now Hiring: Quality & Line Inspection Specialist (1st Shift) Location: Southampton, PA | Pay: $30.00 - $35.00/hr + Sign-On Bonus! Are you a detail-obsessed quality pro with hands-on line inspection, precision measuring, and root cause analysis experience? Step into...Permanent employmentTemporary workWork experience placementLocal areaImmediate startRelocation packageShift workDay shift- Helicopter Quality Assurance Inspector - Pennsylvania Quality Inspector Mecaer Aviation Group Inc • Bensalem, Pennsylvania, USA Position Type: Permanent Job Description: Perform in-process and final inspections of aircraft systems and components to determine the conformity...Permanent employment
- ...Job Description Job Description Precision CNC Dimensional Quality Inspector DPI Inc. | Hatboro, PA | Full-Time Since 1988, DPI Inc. has been machining complex, tight-tolerance components for aerospace, defense, cryogenics, and industrial customers. We are adding...Full timeShift work
$20.91 - $45.04 per hour
...actions have the potential to transform the world of tomorrow. In this role you'll: Gain practical experience in Analytics and Quality Engineering Become familiar with data management and reporting across multiple functions Learn the impact of the Quality Function...Work experience placementSummer workInternshipLocal area$19 per hour
Job Description Job Description This is an entry-level position located in Langhorne. The pay rate is $19/hr and is temporary. There is a possibility it could become temporary-to-hire. Langhorne manufacturer is looking for someone with very good attention to ...Permanent employmentTemporary workMonday to Friday- ...to join our UniFirst Family. As a Team Partner in the Shaking and Pressing Department, you will be working on a team to help ensure quality assurance for our customers by utilizing a 20-point inspection process and pressing garments for a finished appearance. At UniFirst...Hourly payImmediate startShift work
- Job Description Job Description Before applying for this role, please read the following information about this opportunity found below. Automation Controls Engineer, Integrator Seeking talented Engineers for our Electrical, Controls Engineer position to join ...Work at officeFlexible hours
- ...distributor of semi-finished metals and engineered plastics, best known for our impressive inventory of 20,000+ products, is seeking 2 Quality Inspectors for our largest production and distribution facility (250,000 sq ft) in Bensalem PA. Position Summary: The Quality...Work experience placementLocal area
- ...Transportation Security Inspector – Aviation Opportunities in Hatboro Transportation Security Inspectors help ensure that airports, air carriers, cargo facilities, and other regulated aviation organizations follow federal transportation-security requirements. Rather...Full timeWork at officeLocal areaFlexible hoursNight shift
- ...Job Description Job Description Job Title: Quality Manager Department: Quality Location : Warminster, PA Accountability... ...Lead, coach, mentor, and develop Quality Technicians, Inspectors, and other Quality personnel to strengthen technical capability...Work at officeFlexible hours
- ...Electrical InspectorLocation: Middletown, PA (Surrounding Areas)Duration: 03/01/2024-12/31/2024Responsibilities of the Electrical Inspector shall be to assure that the Electrical, Communication, and Instrumentation installation on construction projects is performed in accordance...Contract work
- ...Quality Control TechnicianLifeLens Technologies, Inc. is a medical device developer located in beautiful Bucks County, PA. We are pioneering innovative, next-generation treatment devices for personal health monitoring.We are hiring a Quality Control Technician. In this...Full timeWork experience placementWork at officeImmediate start
- ...healthcare industry? Do you have an eye for detail and a passion for quality? At Oliver Healthcare Packaging, we are dedicated to delivering... ...that make a difference in people's lives. Join us as an Inspector on the 1st Shift and be a vital part of a company that is committed...Shift workNight shiftDay shiftAfternoon shift
$50 - $65 per hour
...Job Description Job Description Job Title: Quality Control Engineer Job Description The Quality Control Engineer (QCE) ensures the end-to-end quality compliance of products from internal and external manufacturing to customer site installation within large-scale,...Contract workTemporary workWork at officeMonday to Friday
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Inspector III. Be the first to apply!




