Mechanical Maintenance Supervisor
TallGrass
Job Description Description The Mechanical Maintenance Supervisor is responsible for leading all mechanical maintenance activities at the Tallgrass Cheyeene Energy Center-an off-grid, large-scale AI-dedicated critical power, multi-unit generation campus that is planned to produce approximately 2.5 GW of initial capacity with expansion capability up to 10 GW from a fleet of simple-cycle gas turbines and combined-cycle gas turbine (CCGT) technologies. This role provides direct leadership to mechanical craft personnel and contractors, ensuring safe, reliable, and cost-effective maintenance of gas turbines, steam turbines, HRSGs, and balance-of-plant systems through preventive, predictive, corrective maintenance and outage execution. The Mechanical Maintenance Supervisor applies Human Performance (HP) principles and Tallgrass culture expectations to drive learning, accountability, and continuous improvement. The supervisor ensures Tallgrass values and HP principles are included in effective pre-job briefs, quality post-job reviews, robust event reporting and reviews are focused on process and system improvements rather than individual fault. The role owns mechanical execution quality and rework reduction, holding teams accountable for right the first-time work, defect elimination, and prevention of repeat failures, measured through KPIs including but not limited to rework rate, first-pass yield , defect recurrence, and schedule adherence. The Mechanical Maintenance Supervisor works closely with Operations, Planning, Scheduling, Procurement, Reliability Engineering, Supply Chain, EHS, and the O&M Contractor to meet Tallgrass Energy's safety, regulatory, environmental, and mission critical data center commercial objectives. Responsibilities Responsibilities
- Execute PM/CM activities on turbines, HRSGs, heat exchangers, pumps, compressors, gearboxes, valves, rotating equipment, and piping systems.
- Support major outage planning, scope development, and execution in partnership with Planning & Scheduling and Operations.
- Ensure high-quality work order management and backlog health using Maximo.
- Lead RCAs, defect elimination efforts, and predictive maintenance programs including vibration, thermography, lubrication/oil analysis, and ultrasonic inspections.
- Maintain documentation, OEM technical bulletins, torque specs, and as-built records.
- Ensure PSM/MOC compliance where applicable for mechanical integrity and pressure boundary work.
- Manage contractor scopes, budgets, quality, and schedule adherence.
- Mentor mechanical craft personnel and support continuous improvement initiatives.
- Supervise mechanical maintenance activities for combined-cycle systems, including HRSG pressure parts, duct burners, expansion joints, dampers, steam turbines, condensers, cooling water systems, and auxiliary steam equipment.
- Ensure maintenance execution accounts for thermal transients, startup/shutdown sequencing, and cycling impacts on mechanical components.
- Lead inspection, repair, and replacement activities for HRSG components, including tube systems, insulation, casing, stack components, and safety valves.
- Support steam turbine and condenser maintenance, including lube oil systems, gland seal systems, vacuum systems, circulating water systems, and condenser tube inspection and cleaning.
- Coordinate mechanical scopes during integrated outages to align gas turbine, HRSG, and steam turbine work windows.
- Lead mechanical root cause analyses for combined-cycle equipment failures and recurring defects, with emphasis on thermal fatigue, flow-accelerated corrosion, and condenser performance degradation.
- Ensure mechanical work packages, procedures, and as-built documentation accurately reflect combined-cycle system configuration.
- High school diploma or equivalent
- 7+ years mechanical maintenance experience in large scale power generation or heavy industrial operations.
- 3+ years supervisory or leadership experience.
- Experience with gas and steam turbine components, HRSG systems, and rotating equipment.
- Proficiency in Maximo CMMS
- Intermediate proficiency level in MS Office applications that may include but are not limited to Outlook, Excel, Word, and PowerPoint.
- Certifications, Licenses & Registrations:
- Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers (for travel).
- Technical certificate or an associate degree in Mechanical Maintenance.
- OSHA 30, rigging, vibration analysis (CAT I/II), weld inspection.
- Safety leadership and risk management.
- Technical troubleshooting and problem-solving.
- Planning, scheduling, and contractor coordination.
- Sitting; standing; walking or moving throughout facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 25 lbs.
- Must be able to sit for prolonged periods of time.
- The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
- Ability to work at heights, in confined spaces, and with required PPE.
- Participation in emergency response and abnormal operating condition management.
- Industrial environment requires presence during planned and unplanned outages, including nights, weekends, and holidays as needed.
- Required to carry a cell phone and be available to respond during working and non-working hours.
- May require travel 5-10% for training, vendor visits, and corporate meetings.
- The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed.
- Industry competitive pay
- Health insurance package options that include Flexible Spending & Health Savings Accounts
- Infertility Coverage
- Parental Leave
- 401(k) with up to a 6% match that vests immediately plus an employer discretionary contribution of up to 4%
- Wellness Programs and Mental Health Resources
- Employer-paid life insurance, short-term disability, and long-term disability coverage
- Critical Illness & Accident Insurance
- Vacation, sick days, paid caregiver leave, volunteer and bereavement paid time off
- Identity theft protection
- Annual discretionary bonus
- Generous Tuition Reimbursement Program
- Company-paid holidays and floating holidays
- Company vehicle (if applicable)
- Employee discounts; vehicles, tires, cellular plans, and more
- Networking and employee engagement events
- Personal development to grow your career with us based on your strengths and interests
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Mechanical Maintenance Supervisor in Cheyenne, WY vacancy
- ...JOB DESCRIPTION The Mechanical Maintenance Supervisor is responsible for leading all mechanical maintenance activities at the Tallgrass Cheyeene Energy Center-an off-grid, large-scale AI-dedicated critical power, multi‑unit generation campus that is planned to produce...SuggestedFor contractors
- Requisition ID:298975 Relocation Authorized:National - Family Telework Type:Full-Time Office/Project Work Location: Cheyenne, WY Extraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000...SuggestedFull timeContract workWork experience placementFor subcontractorWork at officeLocal areaRemote workRelocation
- Relocation Authorized: National - Family Telework Type: Full-Time Office/Project Work Location: Cheyenne, WY Requisition ID: 298975 Relocation Authorized: National - Family Telework Type: Full-Time Office/Project Work Location: Cheyenne, WY Extraordinary Teams Building...SuggestedFull timeContract workWork experience placementFor subcontractorWork at officeLocal areaRemote workRelocation
- ...EquipmentShare is Hiring a Heavy Equipment Field Technician (Mechanic) At EquipmentShare, we're not just filling a role - we're... ...to grow with us, bring energy and drive to their work, provide maintenance and repair for a variety of customer and company owned heavy...Suggested16 hoursFull timeFor contractorsMonday to FridayNight shift
- Aerotek - JobID: JP-005853022 [Production Operator / Machinist] As a Press Operator at Aerotek, you'll: Set up, operate, troubleshoot, and maintain various press brake machines; Select tools and fixtures according to the specifications; Perform other duties as assigned...SuggestedImmediate start
$28 - $30 per hour
...ideas. AMC provides significant career advancement opportunities, competitive compensation, benefits, and incentive programs. Maintenance Supervisor Maintenance Supervisors oversee the maintenance team and provide maintenance for the property, including upkeep and repair...Hourly payFull timeTemporary workPart time$45 - $50 per hour
...Welding / Mechanical InspectorSGS is currently looking for a Welding/Mechanical Inspector for some contract work in Casper, Wyoming and San Diego, CA. This is not a full-time contract but some intermittent quality assurance work which will vary based on the projects....Full timeContract workInterim roleLocal areaNight shift$70k - $110k
US - Remote Full time JR3983 About Us Since 1989, SHI International Corp. has helped organizations change the world through technology. We’ve grown every year since, and today we’re proud to be a $16 billion global provider of IT solutions and services. Over 17,000 organizations...Full timeWork experience placementRemote workWorldwideFlexible hours- Job Description Job Description Field Technician - Installer Visionary Broadband seeks a qualified individual to fulfill the role of Field Technician/Installer. This full-time, hourly position will join the Wireless team at Visionary Broadband, a division of...Hourly payFull timeCasual workWork at officeLocal areaMonday to FridayNight shift
- ...organized, clean, and stocked with essential tools and materials. What you’ll bring ~4+ years of hands-on RV repair or related mechanical/electrical experience ~ Strong working knowledge of RV systems, components, and repair procedures ~ RVTI certification ~...Part timeLocal area
$9.1k
Job Description Job Description What Success Looks Like (Objectives): What You’ll Do: You’ll visit customers’ homes, solve problems, and introduce them to smart home tech. Install and service DISH equipment and smart home products in customers’ homes Teach...Hourly payLocal areaFlexible hoursAfternoon shift$20 - $25 per hour
Job Description Job Description Trade the Cubicle for a Company Vehicle Field Tech Opening Field Service Technician – Office Technology | Cheyenne, WY Capital Business Systems | Full-Time | Monday–Friday | No Nights, No Weekends About the Role Capital ...Full timeTemporary workWork at officeLocal areaImmediate startMonday to Friday- Our client is a global industry leading industrial solutions provided for cutting machines, equipment, and solutions beyond machines. The precision cutting technology rests on four main pillars:- Superior, industry-leading CNC cutting machines and eq Service Engineer, ...
- Requisition ID: 299125 ~Relocation Authorized: National - Single ~ Telework Type: Full-Time Office/Project ~ Work Location: Cheyenne, WY Extraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000...Full timeContract workWork experience placementFor subcontractorWork at officeLocal areaRemote workRelocationNight shift
- ...reports and periodic photographic progress reports and keeps supervisors informed on progress of assigned tasks. Contributes to the... ...material on receipt and material issued for preservation and maintenance. Reviews vendor and subcontractor submittals for conformance...Full timeContract workWork experience placementFor subcontractorWork at officeLocal areaRemote workRelocation
- ...functionality prior to travel to customer sites. Track and maintain company tools and supplies and report any damaged or missing items to Supervisor. Complete Job Site Analysis for customer or job sites where work is to be performed. Assemble and secure pipes, fittings,...Temporary workFlexible hoursAfternoon shift
- ...at customer site. Performs preventative maintenance activities as per documented schedules... ...incidents to site management and to their supervisor. External Qualifications and... ...procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses...Full timeApprenticeshipRelocation
$30 - $45 per hour
...and refrigeration industry! Responsibilities The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic...Remote workRelocation package- This company has over 160 years of experience as a processing and packaging machine manufacturer with a global presence in more than 30 countries, rest assured;no day will ever be identical. The client's customers are as diverse as their products, ra Field Service Technician...
- ...Technician Efficiently diagnose any mechanical, hydraulic, or electrical problems and... ...the expectations of the Field Service Supervisor and the customer Regularly reviews data... ...Preferred Experience performing maintenance and repair on multiple types of construction...ApprenticeshipLocal areaNight shift
- ...defective components, utilizing knowledge of equipment operation and repair. Removes and replaces defective electronic, electrical, and mechanical components, such as circuit boards, wiring, switches, heaters using hand tools and following drawings and manufacturer’s manuals....Work experience placementLocal areaRelocation packageMonday to FridayFlexible hours
- ...today! Knife River is currently accepting applications for a Mechanic. This is a great opportunity, for the individual that enjoys learning... ...services. The Mechanic is responsible for assisting with maintenance and repairs to construction equipment and crusher equipment....Full timeFor contractorsCasual workWork at officeMonday to FridayNight shift
- ...commercial HVAC industry, you will perform emergency and preventative maintenance services on installed systems. You will also leverage your... ...other equivalent systems.An aptitude for computers and/or mechanical equipment and a strong drive to self-teach and expand...Contract work
- ...customer site. Performs preventative maintenance activities as per documented schedules... ...unresolved issues to product specialists / Supervisor Coaches and develops technicians and... ..., specialized equipment such as mechanical and electronic service tools, and diagnoses...ApprenticeshipRelocation package
$68.6k - $109.76k
...identifying technical issues and conductingon-site troubleshooting within certified areas.Execute installation and commissioning, maintenance, repairs, extensions,upgrades, retrofits, end-of-life services, and replacements.Support the certification process of Associate...Hourly payWork at officeRemote workMonday to Friday- ...Field Service Technicians are creative mechanic marvels that contribute to the organization... ...perform field-related preventative maintenance and routine repairs on all DEUTZ products... ...will liaise with our Service Supervisor, Parts Dept, Customers, New engine sales...Local areaRemote work
$36.59 - $50.29 per hour
...controls systems including system‑level controllers. MUST BE PROFICIENT WITH LON Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry. Demonstrated knowledge and understanding of mechanical drawings, electrical wiring...Hourly payTemporary workFor contractorsWork experience placementFor subcontractor$35 per hour
This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. This is a 1099/per call position Pay is based...Local areaMonday to FridayDay shiftWeekday work- ...Job Title Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed... ...assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major...Full timeLocal areaRelocation
- ...Execute field service requirements such as installation and maintenance of wellhead equipment while providing exceptional customer service... ...customer service and problem-solving skills. Strong mechanical aptitude. Self-motivated with the ability to work independently...Worldwide
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Mechanical Maintenance Supervisor. Be the first to apply!
Related searches
- entry level mechanical design Cheyenne, WY
- mechanical installation Cheyenne, WY
- mechanical design Cheyenne, WY
- mechanical commissioning Cheyenne, WY
- planned maintenance Cheyenne, WY
- commercial maintenance Cheyenne, WY
- sap plant maintenance Cheyenne, WY
- plant maintenance Cheyenne, WY
- maintenance specialist Cheyenne, WY
- hvac maintenance Cheyenne, WY




