Pipefitter Fabricator
Turner Industries Group
Job Description
Job Description
THIS JOB IS AT THE PORT ALLEN, LA PIPE FABRICATION SHOP. YOU MUST BE ABLE TO PASS A PIPE FITTERS TEST
Job Description:
Works under the direction of a foreman, assist skilled workers in performing their assigned duties, and performs a large variety of other duties. Ability to interpret shop sketches, identifies material listed on sketches, and fabricates pipe spools from detailed sketches.
Functional Requirements:
Read and sign off on JSA; gather material listed on sketch to fabrication table; record heat numbers from fittings to the sketch if required; lay out for inside and outside diameter nozzle attachments; prep pipe and fittings with pneumatic grinders for fit up; use a plasma or oxy/fuel cutting torch; clean out inside diameter with compressed air after fit up; math skills required to add and subtract dimensions, figure inside/outside arc of ells, figure outside diameter rolls for spool orientation such as attachments, flange two holes; and maintains a clean work area.
Qualification Standards:
- Preferably one (1) to four (4) years of experience in specified skill
- Pre-employment on-site qualification test
- Post-offer drug/alcohol screen and physical evaluation
- OSHA approved corrective eye wear (Z87)
- Job site "Personal Protective Equipment" requirements (hearing protection, safety glasses, long sleeve shirt, gloves, steel toe boots, etc.)
Physical Involvement:
Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting ; crawling; seeing with or without correction; hearing with or without correction
Mental Involvement:
Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; reading and interpreting load charts; judging distances and slopes accurately; following oral and/or written directions; reading; writing; ability to recognize and report safety hazards
Work Environment Factors:
Location: industrial construction sites and/or fabrication shop
Mobility Barriers to Access Job Site: uneven ground levels; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas
Climatic/Environmental Conditions at Job Site: Outdoor climate; Exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances
Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, sex, sexual orientation, national origin, disability, and/or protected veteran status in accordance with governing law.
SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR THE PURPPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS PLEASE CONTACT OUR HIRING OFFICE AT View email address on ziprecruiter.com -INDUSTRIES.COM. BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST.
Job Posted by ApplicantPro
- ...Plumber/Pipe Fitter The Plumber/Pipe Fitter lays out, fabricates, assembles, installs and maintains piping and piping systems and equipment... ...to make calculations for work. Ability to read and utilize Pipefitter's Blue Book. This position requires working in diverse...Suggested
$125 per hour
...38 on days and $40 on nights You will be working 50 to 70 hours a week Per diem is $125 a day Responsibilities Fabricate and maintain structural, hydraulic, and fluid systems using Schedule 10 stainless steel and carbon steel pipe on launch mounts and...SuggestedWeekly payDaily paidContract workTemporary workNight shift$21.05 per hour
...Plumber/Pipefitter Master This is a fast-paced, highly visible advanced journeyman position that requires superior technical knowledge... ...water, and heating water supply/return. Work skills include fabrication, installation, and repair of different piping materials,...SuggestedHourly pay- ...More information about this job Overview The Pipefitter will have knowledge of test piping systems, oxygen and acetylene cutting... ...takeoffs, field sketches, and understand specifications Fabricate and install screw pipe, socket weld pipe, stainless tubing, carbon...SuggestedFor subcontractorWork at office
- ...Pipefitter Job The Pipefitter will have knowledge of test piping systems, oxygen and acetylene cutting, basic rigging, operation of... ...material takeoffs, field sketches, and understand specifications Fabricate and install screw pipe, socket weld pipe, stainless tubing,...SuggestedFor subcontractorWork at office
- ...Pipe Fitter The Pipe Fitter lays out, fabricates, assembles, installs and maintains piping and piping systems and equipment for steam... ...to make calculations for work. Ability to read and utilize Pipefitter's Blue Book. This position requires working in diverse...
- ...discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Lays out, fabricates, assembles, installs and maintains piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for...Local areaImmediate startFlexible hours
- ...Job Description Job Description Pipefitter / Pipe Welder Foreman – Industrial Piping & Welding We are seeking an experienced... ...background in industrial pipefitting, pipe welding, piping fabrication, and industrial piping installation . The ideal candidate...Immediate start
- ...goals. U.S. Engineering Service is growing our mechanical service team in Kansas City, and we're looking for skilled, hardworking pipefitters and journeymen ready to build a long-term career with a company that invests in its people. If you're a top-tier tradesperson...Full timeContract workLocal areaRelocationWork visaRelocation package
- ...working relationships and extraordinary workforce. We are seeking Pipefitters for long-term maintenance work in Baton Rouge, LA and the surrounding areas. The Pipefitter position lays out, fabricates, assembles, installs, and maintains piping and piping systems,...For contractors
- Fire Sprinkler Foreman Make a difference, protect lives, and achieve your dreams. Build your career with the industry-leading fire, life safety and security company. Fire sprinkler foreman are responsible for the complete installation of fire sprinkler systems in...Full timeContract workTemporary workApprenticeshipImmediate start
- ...Gallo Mechanical is looking for a Plumber/Pipefitter to join our construction team. The Plumber/Pipe Fitter lays out, fabricates, assembles, installs and maintains piping and piping systems and equipment for steam, hot water, heating, cooling, lubricating, sprinkling...Full timeTemporary work
- ...Pipefitter CAM Industrial Solutions is one of the largest and fastest-growing, privately held industrial services companies operating... ...Summary Lay out, position, align, and fit together fabricated parts. Fabricate, as needed. Primary Responsibilities...
$31 per hour
Job Description Job Description Job Summary We are seeking experienced Pipe Welders for a project located in Walker, Louisiana . We are actively recruiting skilled, dependable, and safety-focused individuals with hands-on experience in Flux Core Arc Welding...Hourly payDaily paidFull time$53 per hour
...and comprehension skills · Knowledge of the layout, fit-up, fabrication and installation of pipe, flanges and valves · Read and... ...standard measurements Job Description: A First-Class Pipefitter, also referred to as a Journeyman Pipefitter, is responsible...Hourly payDaily paidPermanent employmentImmediate startShift workNight shiftDay shift$33 per hour
...Job Description Job Description Pipefitter / Pipe Welder - Data Center Construction\n Location: Brownsville, TX \n Pay: $33.00... ...STT/RMD), FCAW-G, and other approved welding processes. \n Fabricate and assemble piping systems and structural components supporting...Weekly payDaily paidFull timeContract workTemporary workShift workNight shiftWeekend work- ...date. *Recruiting Agencies: Thorpe Specialty Services does not accept unsolicited resumes from recruiting agencies. The FRP Pipefitter is responsible for the layout, assembly, installation, maintenance, and repair of FRP piping systems in industrial environments,...Contract workLocal areaWork visaShift workNight shift
- ...proof, look no further than our strong working relationships and extraordinary workforce. We are seeking NCCER credentialed Pipefitters with Rope Access - Level I, Level II, or Level III certification in the Baton Rouge, LA area. The Boilermaker position assembles...For contractors
- ...be proud of.The PositionISC is seeking skilled Welders to join our experienced craft workforce. This position performs welding, fabrication, and material preparation while maintaining ISC's commitment to safety, quality, and productivity.What You'll DoWeld components in...
$25 per hour
Traveling Structural Welder - Plant Outages Traveling Structural Welder - $25/ hr + Paid Travel, Tools Supplied, and Referral Bonuses We\'ve Got the Gear, the Travel, and the Pay - Just Bring the Skill At Industrial Air Flow Dynamics, Inc., we supply tools and PPE for ...Daily paidTemporary work- WelderLGG INDUSTRIAL is a solutions-driven national distributor of hoses, gaskets, and conveyor products. Our skilled colleagues serve customers in various industrial segments to improve their operations and reduce their total cost of ownership. With locations across the...Temporary workNight shiftWeekend work
- Ingram Barge is seeking an ExperiencedWelder for our team in Port Allen, LA. This position is responsible for the repair and maintenance of Ingram's fleet of barges. We operate in an environment where flexibility and a willingness to take on new tasks, and responsibilities...
- Structural WelderThe Structural Welder will create frames for large structures. Most possess ability to set up equipment and weld either pipe, plate or structural steel using arc, gas-shielded arc or gas welding equipment. Must be able to produce quality work with reasonable...For subcontractorWork at office
- Company Overview: Flowserve is a global manufacturer of pumps, valves, seals, and aftermarket services, delivering comprehensive flow control solutions that support essential industries such as energy, clean water, and pharmaceuticals. If you're looking for a ...Full timeTemporary workFlexible hoursWeekend work
$35 per hour
...Cape Canaveral, FL - $35am shift / $37pm shift an hour with $125 per diem Job Description This role focuses on welding and fabricating launch hardware components used in advanced aerospace applications. You will perform highprecision structural and pipe welding on...Weekly payDaily paidContract workTemporary workShift work$35 - $37 per hour
...Job Title: Structural Welder (Launch Hardware) Multiple Shifts Job Description This role focuses on welding and fabricating launch hardware and related structural components using multiple welding processes on carbon steel, stainless steel, and aluminum. You...Weekly payContract workTemporary workShift work- More information about this job Overview The Combo Welder must be trained in a variety of welding processes, including arc welding and oxy-fuel welding depending on the material being used. Must possess the ability to set up equipment and weld either pipe, plate...For subcontractorWork at office
$45 per hour
...a naval shipyard and shop environment that is physically demanding and hands-on. You will work both on board naval ships and in fabrication or assembly areas, frequently operating in confined spaces and on sub-assemblies. The role requires regular climbing up and down...Weekly payDaily paidContract workTemporary work- Central Plumbing is looking for an experienced Service Plumber to join our growing team! About the Role Diagnose and repair plumbing issues, install and maintain water supply and drainage systems, repair water heaters, fixtures, and piping, provide outstanding customer...Flexible hours
$100k
Overview Looking to TRADE up to a better opportunity? Southern Air of Baton Rouge is looking for a self-motivated individual with a positive attitude to join our growing and dedicated plumbing team. Journeyman Plumbers are paid on a commission basis. ...Full timeApprenticeshipLocal areaRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Pipefitter Fabricator. Be the first to apply!


