Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Building Engineer

$42.25 - $49.7 per hour

Cushman & Wakefield

Job Title

Building Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Job Description

• Perform all plumbing, electrical, or HVAC requirements of the building(s)

• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.

• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings

• Verify field conditions and perform any necessary repairs or adjustments

• Monitor Energy Management

• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property

• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)

• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed

• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris

• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management

• Document and report activities to supervisor

• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns

• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits

• Complete all required C&W Safety Training as scheduled annually

• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

IMPORTANT EDUCATION:

• High School Diploma of GED Equivalent

• Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE:

• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ADDITIONAL ELIGIBILITY QUALIFICATIONS:

• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)

• May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements

• Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)

• Basic Computing Skills in Outlook, Excel & Word

• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.

• Knowledgeable in energy management systems, techniques and operations

• Thorough knowledge in all building systems operations, maintenance and repair

May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT:

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices

• Regularly required to crouch and reach to install/move equipment

• Involves movement between departments, floors, and properties to facilitate work

Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.

The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.

Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.

The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.

The company will not pay less than minimum wage for this role.

The compensation for the position is: $42.25 - $49.70

Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io . Please refer to the job title and job location when you contact us.

INCO: “Cushman & Wakefield”

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Building Engineer in Buffalo Grove, IL vacancy
  • $68.83k - $117.99k

     ...Job Family: Buildings Req ID: 504588 Position Location: This candidate can be located anywhere in the US within one hour of a...  .... Transform the everyday with us! Building Automation Engineers serve as a technical leader during pre-construction and early... 
    Suggested
    Permanent employment
    Full time
    Contract work
    For contractors
    Work at office
    Local area
    Immediate start
    Night shift

    Siemens

    Buffalo Grove, IL
    1 day ago
  • $45 per hour

     ...Building Engineer - Non Union Arlington Heights, IL Monday - Friday First Shift On-Call/OT/Weekends as needed/Holidays as needed Pay Rate COE: $45.00 PH Duties of Building Engineer: ~ Meeting and Prioritization ~ Regular meetings with... 
    Suggested
    Seasonal work
    Immediate start
    Monday to Friday
    Weekend work
    Day shift

    Building Services of America

    Arlington Heights, IL
    2 days ago
  • $24.99 - $36.11 per hour

     ...from our caring culture. It is a culture we can only realize by building trust. Trust established by ensuring associates feel respected,...  ...and communities. About the role We are looking for a Building Engineer at Trustmark in Lake Forest, Illinois. Provide maintenance of buildings... 
    Suggested
    Hourly pay
    Work at office

    Trustmark

    Lake Forest, IL
    4 days ago
  • $90k - $120k

     ...Location: Crystal Lake or Bannockburn, IL About the role, Your Impact Baxter & Woodman offers a rewarding opportunity for a Construction Engineer III in our Crystal Lake or Bannockburn, IL office. The Engineer III will support the firm’s construction group on projects ranging... 
    Suggested
    For contractors
    Work at office
    Home office
    Flexible hours

    Baxter and Woodman Inc

    Bannockburn, IL
    1 day ago
  • $68.9k - $98.2k

     ...communities. How will you make a difference? As a Manufacturing Engineer III within Wabtec Bus Solutions, you will perform a variety of...  ...through CNC and/or manual machining, and for designing, building, modifying, and maintaining fixtures to support safe, repeatable... 
    Suggested
    Work experience placement
    Work at office
    Worldwide
    Relocation package

    Wabtec

    Buffalo Grove, IL
    1 day ago
  •  ...About the job Manufacturing Engineer II Manufacturing Engineer II Job Introduction The Manufacturing Engineer is responsible for the technical management and development of existing product lines. Role Responsibility The following reflects essential... 

    Phantom Staffing

    Vernon Hills, IL
    1 day ago
  • $68k - $96k

     ...tooling, and automation systems Troubleshoot production and equipment issues in collaboration with operators, maintenance, and engineering teams Provide technical input and cost justification for capital equipment purchases and process upgrades Collaborate with... 
    Full time

    Mayville Engineering Company, Inc.

    Wheeling, IL
    7 hours ago
  • $78k - $86k

     ...solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve...  ...Qualifications Bachelor's degree with an emphasis in Mechanical Engineering preferred or experience in lieu Previous manufacturing... 

    Bosch Group Inc

    Lincolnshire, IL
    2 days ago
  • $82.54k - $141.49k

     ...Who knows where our shared journey will take you? Our Smart Buildings help to create efficient, safe, adaptable, and responsible...  ...Transform the everyday with us! The Senior Manufacturing Engineer (or Manufacturing Engineer III) plays a key role in new product... 
    Local area
    Immediate start

    Siemens

    Buffalo Grove, IL
    1 day ago
  • $100k - $120k

     ...Senior Product Engineer At Klein Tools, curiosity powers discovery, ownership inspires excellence, and urgency means we run towards...  ...high difficulty projects proactively. Accurately estimate and build project timelines within phase gate product development... 
    Work experience placement

    Klein Tools

    Lincolnshire, IL
    4 days ago
  • $110k - $130k

     ...SR Design Engineer Remote Worker - Vernon Hills, IL 60061; Chicago Office - Vernon Hills, IL 60061; Galesburg Office - Galesburg, IL...  ...and make the world a better place. Join our team today and start building your career with one of the 50 fastest growing companies of the... 
    Full time
    Temporary work
    For contractors
    Work at office
    Immediate start
    Remote work

    Intellihot Inc

    Vernon Hills, IL
    4 days ago
  • $85.76k - $107.2k

     ...shape a brighter way forward. Critical Environments Operating Engineer What this job involves: As a Critical Environments...  ...opportunities to work with cutting-edge technology while building a rewarding career in one of the industry's most dynamic and growing... 
    Daily paid
    Full time
    For contractors
    Local area
    Immediate start

    *US AMR-Jones Lang LaSalle Americas, Inc.

    Riverwoods, IL
    7 hours ago
  •  ...Engage with equipment suppliers from Design through Site Acceptance phases of projects. Support molding & automation/ Software engineering Collaborate with a quality team during the development of validation protocols, reports and approvals. Computer system... 

    Software Technology Inc

    Buffalo Grove, IL
    4 days ago
  • Confidential Recruiting Partners is looking for a Civil Engineer based in Wheeling, IL, who has several years of hands-on design experience. The role involves supporting land development, municipal, and site design projects while working closely with surveyors and planners... 
    Local area

    Confidential Recruiting Partners

    Wheeling, IL
    5 days ago
  •  ...Helm Tool is searching for a focused and motivated Mold Design Engineer to join our team. The successful candidate will work with a team...  ...process as well as supporting manufacturing during the build. Software Systems: Well versed in the MS Office suite (Outlook... 
    Immediate start

    Helm Tool

    Schaumburg, IL
    23 days ago
  •  ...revenue growth across a broad B2B customer base. If you are a motivated self-starter who thrives in a fast-paced environment, enjoys building relationships, and is energized by hitting goals, this is your opportunity to grow your sales career with a trusted industry... 
    Work experience placement
    Work at office
    Flexible hours
    Shift work

    Staples

    Lincolnshire, IL
    1 day ago
  • $82.54k - $141.49k

     ...the production process. Ensure that manufacturing processes adhere to safety standards. Provide training and mentorship to junior engineers and production staff. Have excellent communication and leadership abilities, be a team player with the ability to work... 
    Local area

    Siemens Mobility

    Buffalo Grove, IL
    5 days ago
  •  ...life. Your expertise will support the seamless execution of residential renovations, ensuring designs meet client specifications, building codes, and industry standards. This position offers an exciting opportunity to contribute to high-quality projects while honing your... 
    Full time
    Temporary work
    Work at office

    Airoom Companies, LLC

    Buffalo Grove, IL
    2 days ago
  •  ...design assurance deliverables required at each phase with high level of coaching, including evaluation of materials, advising design engineering on component selection and application, evaluating design or test methods and statistical process control procedures, determining... 
    Work experience placement
    Summer work
    Flexible hours

    Zebra Technologies Corporation

    Lincolnshire, IL
    6 days ago
  •  ...products meet specifications throughout all program phases and is ideal for candidates with a background in Electrical or Electronics Engineering. The role requires 2+ years of experience in Hardware or Electronics Engineering and offers a hybrid work model, with competitive... 

    Zebra Technologies

    Lincolnshire, IL
    4 days ago
  • $76.64k - $114.96k

    Zebra Technologies in Lincolnshire is seeking a Hardware Engineer with a Bachelor's degree in Engineering and at least 2 years of experience in Hardware or Electronics Engineering. The role involves design assurance deliverables, evaluating production materials, and advising... 

    Zebra Technologies

    Lincolnshire, IL
    6 days ago
  • $76.64k - $114.96k

     ...in production of Zebra’s devices or solutions. Advising design engineering on the selection, application, and test of mechanical and/or...  ...fixture and measurement systems, manufacturing validation test, build qualification, and corrective action of results to the appropriate... 
    Work experience placement
    Summer work
    Flexible hours

    Zebra Technologies

    Lincolnshire, IL
    2 days ago
  • $85k - $95k

    Klein Tools seeks a skilled Product Engineer in Lincolnshire, Illinois, responsible for designing and improving innovative tools. The role requires a Bachelor of Science in Mechanical Engineering and at least 1.5 years of experience. You'll manage product development timelines... 

    Klein Tools

    Lincolnshire, IL
    2 days ago
  • $68k - $136k

     ...This role is specific to a Reliability / Maintenance engineering discipline. With the primary purpose of sustaining the automation...  ...media, based on the needs and priorities of the audience. • Builds open, honest, collaborative with a network of colleagues, contractors... 
    For contractors
    Work experience placement
    Worldwide
    Shift work

    Abbott

    Buffalo Grove, IL
    2 days ago
  • $76k - $101k

    YDU JC Air Cond & Ref Inc.- Dubai is seeking a Controls Systems Engineer II to design and configure building control systems that meet project requirements. You will be responsible for developing software, ensuring timely project delivery, and collaborating with the team... 

    YDU JC Air Cond & Ref Inc.- Dubai

    Arlington Heights, IL
    3 days ago
  • Destaco in Wheeling Township, Illinois is seeking a Quality Engineer to support the Quality Manager in implementing lean manufacturing processes and maintaining the quality management system. You will perform visual and dimensional inspections to ensure compliance with... 

    Destaco

    Wheeling, IL
    5 days ago
  • $25 - $30 per hour

     ...solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve...  ...supervisor Qualifications ~ Two years associate degree in Engineering and/or applicable experience in machining, tool design and engineering... 
    Hourly pay
    Monday to Friday
    Shift work

    Bosch Group Inc

    Lincolnshire, IL
    4 days ago
  •  ...looking forward to hear from you…;o)..Thanks Christian M. Kendler (***) ***-****   We are seeking a Mechanical/Electrical Engineer (Project Engineer) to become a part of our team! You will be required to perform a variety of engineering tasks, as well as identify... 

    Central Machines, Inc.

    Buffalo Grove, IL
    12 days ago
  •  ...delivery from proposal to closeout while ensuring project profitability and technical excellence. Qualifications include a Professional Engineer (PE) license, a Bachelor's degree in Civil Engineering, and over 8 years of relevant experience. The role offers a collaborative... 

    Atwell, LLC

    Wheeling, IL
    3 days ago
  • Trustmark is looking for a Building Engineer in Lake Forest, Illinois, to maintain buildings and grounds while ensuring a safe work environment. Responsibilities include maintenance of HVAC systems and facilities, performing repairs, and managing workspace organization.... 

    Trustmark

    Lake Forest, IL
    5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!