Quality Inspector

Job Title: Bench Inspector Job Description

This role focuses on performing precise bench-level inspections of machined aerospace components in a quality department within a small machine shop. You will use advanced inspection tools, software, and blueprints to verify that CNC-milled parts meet strict dimensional and geometric tolerances, supporting high-quality production for the aviation industry.

Responsibilities

• Perform detailed bench inspections of machined parts to ensure they meet all dimensional, geometric, and quality requirements.

• Conduct in-process inspections to verify part conformity during various stages of production.

• Read, interpret, and understand engineering blueprints and tolerances to guide inspection activities.

• Use precision measurement instruments such as micrometers, calipers, height gauges, and other metrology tools to verify dimensions and tolerances.

• Apply GD&T principles when inspecting parts to ensure compliance with engineering specifications.

• Utilize Inspection Expert Software to document inspections, record results, and generate reports.

• Support quality assurance activities by identifying nonconformances and communicating findings clearly and accurately.

• Assist with First Article Inspections (FAIs) as needed, contributing to FAI reporting and documentation.

• Collaborate closely with CNC machinists and other team members to resolve quality issues and maintain consistent standards.

• Maintain an organized, clean, and safe work area within the quality department.

• Handle and lift parts and inspection equipment as needed, and remain on your feet for extended periods when required.

• Perform additional quality-related tasks and responsibilities as requested to support production and customer requirements.

Essential Skills

• Minimum 23 years of quality inspection experience in the aviation industry.

• Minimum 23 years of experience working with GD&T in a production or inspection environment.

• At least 2 years of bench-level inspection experience, preferably with machined parts.

• Proficiency in reading and interpreting blueprints and engineering drawings.

• Hands-on experience using micrometers and calipers for precision measurements.

• Ability to use height gauges and other precision measurement instruments for dimensional verification.

• Experience inspecting machined parts produced on 3-, 4-, and 5-axis CNC milling machines.

• Working knowledge of quality inspection practices in a machine shop environment.

• High attention to detail and strong observational skills to identify deviations and defects.

• Ability to stand for long periods and handle or lift parts as needed in a shop setting.

• Willingness to work a standard first-shift schedule and occasional overtime on Saturdays when required.

Additional Skills & Qualifications

• Experience in the aviation or aerospace industry, particularly within small machine shop operations.

• Prior involvement with First Article Inspections (FAIs) and FAI reporting.

• Familiarity with CMM (Coordinate Measuring Machine) operations or data review.

• Proficiency with Inspection Expert Software for inspection planning and reporting.

• Background as a CNC machinist or exposure to 3-, 4-, and 5-axis CNC milling and FANUC controls.

• Strong communication skills to collaborate effectively with machinists and quality team members.

• Ability to follow established quality procedures and contribute to continuous improvement efforts.

Why Work Here?

You will join a close-knit, small machine shop dedicated to serving the aviation industry, where your contributions are visible and valued. The environment offers the stability of a first-shift schedule with limited overtime, supporting a healthy work-life balance. You will work alongside experienced professionals in a focused quality department, gaining exposure to precision aerospace work and advanced inspection tools. The company fosters a practical, down-to-earth culture where teamwork, craftsmanship, and consistent quality are central to success.

Work Environment

You will work in a machine shop of approximately 50 employees, with this role based in a small, specialized quality department. The shop supports precision CNC milling operations for aerospace and aviation components, including 3-, 4-, and 5-axis mills with FANUC controls. The quality area uses precision instruments such as micrometers, calipers, height gauges, and related inspection tools, as well as Inspection Expert Software and other quality assurance technologies. This is a first-shift position with hours from 7:00 a.m. to 3:30 p.m., Monday through Friday. Overtime is minimal and limited to occasional Saturdays for partial shifts when needed. The environment is hands-on and shop-floor oriented, where you may stand for extended periods and handle parts during inspections. The dress code is casual and practical, with jeans and a T-shirt appropriate for the machine shop setting.

Job Type & Location

This is a Contract to Hire position based out of Wichita, KS.

Pay and Benefits

The pay range for this position is $24.00 - $27.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Wichita, KS.

Application Deadline

This position is anticipated to close on Oct 28, 2026.

Workplace Type

This is a fully onsite position in Wichita,KS.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.