Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

DIE Cutter Operator

The IMAGINE Group

Job PostingShift: Sunday - Thursday, 9:45pm - 6:15amJob Summary:Set-up and run die cutting equipment, maintaining good quality, productivity, and work attitude.Job Description:Set-up and run die cutting equipment.Maintain standard of quality.Report any problems and/or discrepancies to the die cutting assistant/department manager.Keep the work area clean and orderly.Work overtime when needed.Report accurate time and quantities using the "ELF" systems.Be responsible for maintaining glue inventory.Other duties as assigned.Supervisory Responsibilities:NoneRequirementsMinimum Qualifications of Position:High School diploma or equivalent/Technical or equivalent experience1 year die cutting experience on any material.Preferred Qualifications of Position:Large Format Die cutting experience.Knowledge and Skills:Ability to measure in fractions of inches up to and including 32nds.Ability to communicate/understand written as well as oral instructions.Ability to apply written instructions to machine set-up.Basic Math skills including skills including addition, subtraction, multiplication, and division.Reliability through attendance, punctuality, and attention to workstation.Supports a safe work environment.Knowledge of production materials.Working Conditions and Physical Requirement:Ability to lift, push and pull up to 50 lbs.Ability to visually inspect all work for defects and distinguish colors.Frequent reaching, bending, climbing, kneeling, crouching, and stooping.Manual dexterity for repetitive work.Frequent walking and standing.Chemicals: N/ATravel: N/AThe Imagine Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the DIE Cutter Operator in Shakopee, MN vacancy
  •  ...Job Description Job Description GENERAL DESCRIPTION: The Laser Operator is primarily responsible for operating and maintaining the laser system and performing the following essential duties and responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES: ● Maintain dust... 
    Suggested

    CT Holdings

    Shakopee, MN
    2 days ago
  • $20 per hour

     ...Job Title: 2nd and 3rd Shift Cutting Machine Operator Helper $20/hr Responsibilities Load products into the laminating machine. Stack completed printed and laminated materials on a pallet. Perform visual quality checks and document findings on quality documents... 
    Suggested
    Weekly pay
    Contract work
    Temporary work
    Shift work
    Night shift
    Afternoon shift

    Aerotek

    Eden Prairie, MN
    3 days ago
  • $27 - $35 per hour

     ...combines custom fabrication, rack and fixture design, welding, tool making, and industrial maintenance to support our manufacturing operation. Every rack, fixture, and tool you build directly impacts product quality, production efficiency, and our ability to... 
    Suggested
    Work at office
    Relocation
    Relocation package
    Monday to Friday
    Flexible hours
    Shift work

    NICO PRODUCTS, INC.

    Victoria, MN
    20 hours ago
  •  ...re ready to be part of a rock-solid company that truly invests in your future come grow with us at CEM.   The CNC Lathe/Mill Operator produces machined parts by operating a computer numerical controlled (CNC) Lathes and/or Mills with minimal supervision. This position... 
    Suggested
    Relocation package
    Monday to Friday
    Monday to Thursday
    Day shift
    Afternoon shift
    Weekday work

    Continental Engineering & Manufacturing, Inc (CEM)

    Chaska, MN
    17 days ago
  • $28 per hour

     ...Description: Metal Plater | Line Operator | Electroplating Technician | Manufacturing Production Technician Location: Avtec Finishing New Hope, Minnesota Shift: 2nd Shift | Monday-Thursday | 3:00 PM-1:00 AM + Overtime as Needed Training: Initial training... 
    Suggested
    Part time
    Relocation
    Relocation package
    Flexible hours
    Shift work
    Day shift
    Afternoon shift

    Avtec Finishing

    Chaska, MN
    3 days ago
  • $18 per hour

    Job Description Job Description FT- M-F (8am - 4pm) Pay: From $18.00 per hour Hiring Bonus : $500 Job description: At Ultimate Sustainability, your work truly makes a difference! We create bright, sustainable futures for young adults with Autism and related...
    Hourly pay
    Full time
    Relocation package
    Monday to Friday
    Shift work
    Day shift

    Ultimate Sustainability LLC

    Chanhassen, MN
    16 days ago
  • $20.15 - $21.15 per hour

    Job Description - Overview Hobby Lobby is seeking organized, customer service oriented people to join our team as a Framer. We need enthusiastic individuals who are motivated, responsible, and have the drive to make the most of a career with us. We are an EXCITING,...
    Hourly pay
    Full time
    Seasonal work
    Flexible hours

    Hobby Lobby

    Burnsville, MN
    20 hours ago
  • $20 - $30 per hour

     ...Bindery Operator **Prior experience programming and operating bindery equipment required** Cutters, Folders, Gluers, and Stitchers needed Been around them? We can train you...  ...operate some of the following equipment: Bobst Die Cutter, MBO and Stahl folders, Polar... 
    Full time
    Flexible hours
    Shift work
    Rotating shift
    Day shift

    Beneficial Talent Source

    Chanhassen, MN
    2 days ago
  • $41.18k - $44.93k

     ...change and community involvement.  We are looking for Machine Operators to join our Cutting Department. You’ll be part of a talented...  ...per exact specifications, in a timely manner using a Zund digital die cutting machine. Shifts available: Sunday through Tuesday 6:... 
    Full time
    Work experience placement
    Flexible hours
    Shift work

    The Bernard Group Inc

    Chanhassen, MN
    14 days ago
  •  ...Job Description Insight Global is looking for a Machinist to perform precision machining operations that meet quality and schedule requirements. This role involves setting up and operating machines, interpreting prints, and inspecting parts to ensure accuracy. You’... 

    Insight Global

    Eden Prairie, MN
    1 day ago
  • $30 - $36 per hour

     ...people, one that offers numerous ways to expand your knowledge and advance your career. Primary Objective Perform machining operations in accordance with MTS Machine Shop procedures and work instructions. Utilize documentation and skills to provide parts and... 
    Hourly pay
    Full time
    Local area
    Shift work
    Afternoon shift

    ITW

    Eden Prairie, MN
    20 hours ago
  • $26 - $36 per hour

     ...people, one that offers numerous ways to expand your knowledge and advance your career. Primary Objective: Perform machining operations in accordance with MTS Machine Shop procedures and work instructions. Utilize documentation and skills to provide parts and assemblies... 
    Hourly pay
    Day shift

    Illinois Tool Works

    Eden Prairie, MN
    8 hours ago
  • $22.5 per hour

     ...We are looking to hire a Plant Operator for our Daniels’ medical waste treatment facility in Shakopee, MN. A Plant Operator has a widely varying role, from checking in containers, double checking paperwork, moving/unloading specific waste containers, and operating a forklift... 
    Hourly pay
    Permanent employment
    Full time
    Seasonal work
    Monday to Friday

    Daniels Sharpsmart

    Shakopee, MN
    4 days ago
  • $15.42 - $20.42 per hour

     ...make critical decisions and judgments with minimal supervision. Responsibilities: Perform routine and repetitive assembly operations and processes under direct supervision. Ensure that relevant job documentation for cell operations and functions is accurate and... 

    Cynet Systems

    Minnetonka, MN
    2 days ago
  • UNFI - - Responsibilities: Maintain meat and seafood cases and perform cutting, wrapping, and preparation; Stock meat and seafood departments and assist customers with questions; Answer department phone calls and refer as appropriate; Assist in ordering and receiving meat...

    UNFI

    Savage, MN
    3 days ago
  • $44.46k - $48.17k

     ...friendly partners that support social change and community involvement.  The Bernard Group is looking for an enthusiastic Laminate Operator to join our team!  You will be responsible for running the machine hot or cold as required by the production job. In this role,... 
    Full time
    Work experience placement
    Flexible hours
    Shift work
    Rotating shift

    The Bernard Group Inc

    Chanhassen, MN
    a month ago
  • $24.2 per hour

     ...Job Description Job Description Hiring for Weekend Overnight Machine Operators Pay up to 24/hr, Fri - Sun Job Description Join our Medical Reagent Small Vial Value Stream team to formulate, fill, test, and package chemical and biological reagent products.... 
    Weekly pay
    Contract work
    Temporary work
    Work at office
    Night shift
    Weekend work

    Aerotek

    Chanhassen, MN
    2 days ago
  • $16.68 per hour

     ..., or customer service positionHave previous work experience selling paint and paint-related productsHave previous work experience operating tinting and mixing equipmentAbility to read, write, comprehend, and communicate in more than one languageAbility to read, write, comprehend... 
    Part time
    Work experience placement
    Afternoon shift

    Sherwin-Williams

    Minnetonka, MN
    1 day ago
  • $16.68 per hour

     ...unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the... 
    Part time
    For contractors
    Work experience placement
    Afternoon shift

    The Sherwin-Williams Company

    Eden Prairie, MN
    20 hours ago
  •  ...Job Description Job Description We are looking for a Multi Spindle Operator to join our team for 1st shift (Monday-Thursday: 5:00am-3:00pm) & enjoy a 4-day work week w/ a paid lunch! JOB TITLE:Machine OperatorSHIFT:1st Shift, Monday-Thursday: 5:00am-3:00pmJOB DESCRIPTION... 
    Temporary work
    Day shift

    Roberts Automatic Products

    Chanhassen, MN
    14 days ago
  • $22 per hour

     ...Job Description Job Description Job Title: Machine Operator Tier 1 - First Shift Location: Chanhassen, MN Type: Contract Compensation: $22.00 / hour Contractor Work Model: On-Site Hours: 6:00 am - 2:30 pm, Monday - Friday, with mandatory overtime every other... 
    Contract work
    For contractors
    Work at office
    Local area
    Monday to Friday
    Shift work
    Day shift

    System One

    Chanhassen, MN
    7 days ago
  • $36 - $41 per hour

     ...We're a growth-stage manufacturer looking for a technically sharp Lathe Machinist Supervisor to run our 2nd shift CNC machining operation. This role is the technical backbone of the shift — your primary job is keeping every operator's machine running, every job on schedule... 
    Hourly pay
    Full time
    Part time
    Shift work
    Day shift
    Afternoon shift

    Stillwell Inc

    Burnsville, MN
    9 days ago
  •  ...shared commitment to delivering top-tier solutions tailored to your needs. Our Machine Operator will be safety focused in their responsibilities of set-up and operation of die cutting presses, laminator and all production equipment according to written and/or verbal... 
    Work at office
    Monday to Thursday
    Flexible hours
    Shift work
    Afternoon shift

    American Flexible Produ

    Chaska, MN
    19 days ago
  • $2,500 per month

     ...etc. #Up to $2500 in free Shutterfly merchandise and huge discounts  #Too many additional reasons to list Responsibilities: ~Operate and maintain equipment including but not limited to digital presses and / or bindery equipment (HP Indigo, Xerox iGen, Laser Max, UV... 
    Hourly pay
    Casual work
    Work at office
    All shifts
    Flexible hours

    Shutterfly

    Shakopee, MN
    more than 2 months ago
  • $22.06 per hour

     ...off, 3 on followed by 2 off, 2 on followed by 3 offMust be willing to work overtime, weekends, nights, and holidays as neededPlant operates 24 hours/day, 7 days/week.Key responsibilities:Support packaging and processing operationsParticipate in equipment startup,... 
    Hourly pay
    Local area
    Shift work
    Night shift
    Weekend work

    General Mills

    Chanhassen, MN
    1 day ago
  •  ...Production OperatorDoherty Staffing Solutions is hiring Production Operators for a leading manufacturing company located in Chaska, MN. If you enjoy a fast-paced environment and want reliable hours with weekly pay, this job could be a great fit. Read below for more information... 
    Weekly pay
    Temporary work
    Local area
    Night shift
    Afternoon shift

    Doherty Staffing

    Chaska, MN
    4 days ago
  • A Union Carpenter is responsible for constructing, installing, and repairing structures, including framing, sheet rocking, rough and finish carpentry. This role involves working with blueprints and building plans, using a range of hand and power tools, and ensuring that...

    RTL Construction Inc

    Shakopee, MN
    3 days ago
  • $15 - $17 per hour

    Finish CarpenterThe candidate will need to be willing to perform finish carpentry installations on remodeled/newly built construction units. This carpenter will help assist journeyman-level carpenters and perform light carpentry as directed. The candidate will perform ...
    Permanent employment
    Temporary work
    Monday to Friday

    Aerotek

    Shakopee, MN
    20 hours ago
  • $29.29 - $47.24 per hour

     ...Bituminous Roadways, Inc. Heavy Equipment Operator Prior Lake, MN 55372 Salary: 29.29 - 47.24 USD / HOUR Department: Materials Work Location: Prior Lake, MN Job type: Full-Time Pay Type / Range: Journeyman Union Scale (Cat 2 - 6). Range $29.29 - 47.24 per hour (based... 
    Hourly pay
    Full time
    For contractors
    Night shift
    Weekend work
    Early shift

    Bituminous Roadways

    Shakopee, MN
    2 days ago
  • $27 per hour

    Tom James Custom Clothing sales office in Eden Prairie, MN is seeking a full-time Seamstress/Tailor or Master Tailor who excels in his or her trade and possesses a talent for delivering the finest tailored clothing with excellent attention to detail. Employees must ...
    Full time
    Work at office
    Immediate start

    Tom James Company

    Eden Prairie, MN
    3 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to DIE Cutter Operator. Be the first to apply!