Building Engineer
Cushman & Wakefield
Building Engineer
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.
Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
IMPORTANT EDUCATION:
High School Diploma of GED Equivalent
Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE:
5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS:
Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.
May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
Basic Computing Skills in Outlook, Excel & Word
Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
Knowledgeable in energy management systems, techniques and operations
Thorough knowledge in all building systems operations, maintenance and repair
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
Regularly required to crouch and reach to install/move equipment
Involves movement between departments, floors, and properties to facilitate work
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
Cushman & Wakefield$73.45k - $132.78k
...Description Leidos Engineering offers its knowledge and expertise over a wide area of cutting-edge energy technologies and independent oversight, combined with proven business acumen. Building our work for publicly- and privately-owned utilities, financial institutions...SuggestedLocal areaImmediate startRemote work- Kappaalphapsi1911 is looking for an Equipment Engineer III in Rolling Meadows, IL. This hybrid role requires 5-7 years of experience focused on deploying advanced technology solutions for 4G and 5G networks. The ideal candidate will lead equipment engineering, procurement...Suggested
$58 per hour
Apex Systems is seeking an Engineer - Equipment III in Rolling Meadows, IL (Hybrid). The role involves engineering, procuring, and deploying equipment for In-Building projects, collaborating with RF and Construction teams. Ideal candidates will have 5-7 years of experience...SuggestedHourly payContract work$90k - $120k
...Location: Crystal Lake or Bannockburn, IL About the role, Your Impact Baxter & Woodman offers a rewarding opportunity for a Construction Engineer III in our Crystal Lake or Bannockburn, IL office. The Engineer III will support the firm’s construction group on projects ranging...SuggestedFor contractorsWork at officeHome officeFlexible hours$83k - $100k
...and respect for our dedicated staff. About the role, Your Impact Baxter & Woodman has a rewarding opportunity for a Construction Engineer II in our Crystal Lake or Bannockburn, IL office. The Construction Engineer II will support the firm’s construction group on a variety...SuggestedFor contractorsWork at officeWork from homeFlexible hours$24.99 - $36.11 per hour
...from our caring culture. It is a culture we can only realize by building trust. Trust established by ensuring associates feel respected,... ...and communities.About the roleWe are looking for a Building Engineer at Trustmark in Lake Forest, Illinois.Provide maintenance of buildings...Work at office- ~ Develop, implement, and optimize manufacturing processes for a variety of products. ~ Collaborate with design and engineering teams to ensure design-for-manufacturing (DFM) principles are applied. ~ Identify, troubleshoot, and resolve production issues to maintain...
$80k - $110k
...ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: The NPI (New Product Introduction) Engineer is responsible for the development, qualification, and launch of new processes for manufacturing. Additionally, the NPI Engineer is...$45 per hour
...Building Engineer Building Engineer - Non Union Arlington Heights, IL Monday Friday First Shift On-Call/OT/Weekends as needed/Holidays as needed Pay Rate COE: $45.00 PH Duties of Building Engineer: Meeting and Prioritization Regular meetings with...Seasonal workImmediate startMonday to FridayWeekend workDay shift- ...Manufacturing / Sustaining Engineer Location: Libertyville, IL Hire Type: Direct Hire | Full-Time Compensation: 100-130k Overview We are seeking a hands-on Manufacturing / Sustaining Engineer to support highly automated medical device manufacturing operations...Permanent employmentFull time
$70k - $90k
...Position Summary We are looking for a Bioprocess Design Engineer to join our client, a top solutions provider of essential cleanroom... ...while meeting deadlines. Relationship Management: Builds productive relationships with customers, suppliers, and internal...$82.54k - $141.49k
...the production process. Ensure that manufacturing processes adhere to safety standards. Provide training and mentorship to junior engineers and production staff. Have excellent communication and leadership abilities, be a team player with the ability to work...Local area$68k - $96k
Center Manufacturing Acquisition seeks a Manufacturing Process Engineer in Wheeling, Illinois. The role involves developing and optimizing manufacturing processes to enhance safety and efficiency. This position requires strong programming skills in laser cutting and CNC...$68k - $96k
...tooling, and automation systems Troubleshoot production and equipment issues in collaboration with operators, maintenance, and engineering teams Provide technical input and cost justification for capital equipment purchases and process upgrades Collaborate with suppliers...- ...Helm Tool is searching for a focused and motivated Mold Design Engineer to join our team. The successful candidate will work with a team... ...process as well as supporting manufacturing during the build. Software Systems: Well versed in the MS Office suite (Outlook...Immediate start
$76.64k - $114.96k
...in production of Zebra’s devices or solutions. Advising design engineering on the selection, application, and test of mechanical and/or... ...fixture and measurement systems, manufacturing validation test, build qualification, and corrective action of results to the appropriate...Work experience placementSummer workFlexible hours- ...products meet specifications throughout all program phases and is ideal for candidates with a background in Electrical or Electronics Engineering. The role requires 2+ years of experience in Hardware or Electronics Engineering and offers a hybrid work model, with competitive...
- Zebra Technologies in Lincolnshire, United States, seeks a Design Assurance Engineer responsible for ensuring products meet quality specifications throughout development. You'll evaluate components and materials, advise engineering teams, and contribute to reliability...
- Zebra is looking for a Design Assurance Engineer based in Lincolnshire, Illinois, who will ensure product quality through evaluations and analyses. You will work closely with the design team on multiple products, applying your engineering skills to uphold quality standards...
$76.64k - $114.96k
Zebra Technologies in Lincolnshire is seeking a Hardware Engineer with a Bachelor's degree in Engineering and at least 2 years of experience in Hardware or Electronics Engineering. The role involves design assurance deliverables, evaluating production materials, and advising...- ...design assurance deliverables required at each phase with high level of coaching, including evaluation of materials, advising design engineering on component selection and application, evaluating design or test methods and statistical process control procedures, determining...Work experience placementSummer workFlexible hours
- Destaco in Wheeling Township, Illinois is seeking a Quality Engineer to support the Quality Manager in implementing lean manufacturing processes and maintaining the quality management system. You will perform visual and dimensional inspections to ensure compliance with...
$80.6k - $114k
Johnson Controls, Inc. in Arlington Heights, Illinois is seeking an HVAC Control Systems Engineer II. The role involves designing and configuring complex building control systems, including integrating low voltage subsystems. The ideal candidate should have a Bachelor's...$80.6k - $114k
YDU JC Air Cond & Ref Inc.- Dubai is looking for an HVAC Control Systems Engineer II based in Arlington Heights, Illinois. This role involves designing and operating complete building control systems and developing software needed for system operations. The ideal candidate...- ...delivery from proposal to closeout while ensuring project profitability and technical excellence. Qualifications include a Professional Engineer (PE) license, a Bachelor's degree in Civil Engineering, and over 8 years of relevant experience. The role offers a collaborative...
- ...looking forward to hear from you…;o)..Thanks Christian M. Kendler (***) ***-**** We are seeking a Mechanical/Electrical Engineer (Project Engineer) to become a part of our team! You will be required to perform a variety of engineering tasks, as well as identify...
- ...Sherwin--william is looking for a Plant Engineering Manager who will be responsible for overseeing the development and implementation of manufacturing processes and equipment. This role involves researching new designs to improve efficiencies and managing the budgets for...
$110k - $130k
...Product Planning Engineer Strategic Product Role | CNC Machine Tools | Schaumburg, IL Area | $110K-$130K + Bonus A global industrial manufacturing organization is seeking a Product Planning Engineer to join a newly formed strategic product team supporting advanced...Worldwide- ...manufacturing firm in Schaumburg looking to identify a Product Planning Engineer to join their growing team! Why Should This Excite You?... ...with R&D, Sales, Automation, and Customer Service, building out product roadmaps, and supporting product launches end to end...
- Abbott Laboratories is seeking a Senior Engineering Manager for its Diabetes Care Division to oversee engineering activities at manufacturing sites. The role demands exemplary project management and compliance knowledge, focusing on performance and continuous improvement...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!



