Welder

Description Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks. Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of metal. Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding torch. Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure, to obtain desired flame. Holds torch at proper angle to metal and guides along weld joint, applying filler rod to molten area to form weld. Examines weld for bead size and other specifications. Repairs broken or cracked metal objects, fills holes, and builds up metal parts. Applies flux to workpiece instead of filler rod. Preheats workpiece in furnace or with torch. Lays out, positions, and tack welds workpieces. Welds along vertical or overhead weld lines. Scarfs or grooves weld prior to applying filler metal. Chips or grinds off excess weld, slag, or spatter. Cleans or degreases parts. Reads job specifications to determine machine adjustments and material requirements. Sets stops or guides to specified length as indicated by scale, rule, or template. Positions workpiece against stops or aligns layout marks with die or blade. Pushes button or depresses pedal to activate machine. Observes machine operation to detect workpiece defects or machine malfunction. Measures workpiece dimensions to determine accuracy of machine operation. Removes burrs, sharp edges, rust, or scale from workpiece. Performs minor machine maintenance such as oiling machines, dies, or workpieces. Assists machine operators to set up machine, and stack, mark, pack, and transport finished workpieces. Rivets and spot welds workpieces Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills Basic Computer Skills including use of email may be required. Certificates, Licenses, Registrations N/A Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. #J-18808-Ljbffr Laser Tech