Machinist
$22 - $26 per hourAvery Weigh-Tronix
Senior Machinist or Machinist
To meet customer's expectations and requirements by producing all parts requiring programming, complex tooling and setups while meeting or exceeding standards for quality, productivity and safety. Standard schedule is 1st shift 4 10 hour days
Job Duties:
- Plans own work to make efficient use of time and skills.
- Inspects own work to established process.
- Understand GD&T tolerances
- Meets safety and good 5S practices.
- Follow all quality procedures and achieve line of sight requirements while assisting others in achieving theirs.
- Able to work within a team.
- Sets a positive example for others by focusing on productivity, added value, through-put, and profits on all jobs.
- Promotes continuous improvement within the department.
- Performs preventive and corrective maintenance as requested.
- Maximizes setups and tooling to present and future jobs.
- Proficient at CNC programming, set up and run.
- Ability to load a part into a machine, run the program, remove the part and inspect.
- Able to meet quality inspections.
- Regular and consistent attendance.
- Good communication skills.
- Performs other related duties as assigned
Equipment Used To Perform Job:
- Lathes
- Milling machines
- OD & Thread Grinders
- Hand tools i.e. screwdrivers, hammers
- Forklift
- Hobing Equipment
- Redine
- Pallet jack
- Ladders
- Computers
- Eye protection required
- Leather footwear required, ear plugs available
Qualifications
Education/Experience:
- High school graduate or equivalent preferred.
- Technical School graduate preferred or
- Minimum 4 years' of experience in similar machine shop setting.
Physical Demands:
- Standing 10 hours per day (out of 10 hour workday) but may work 10-12 hours per day.
- Walk up to 2 hours per day
- Bend, squat (to check parts) - occasionally
- Crawl- rarely
- Reach out from body up to 24 inches holding up to 20 pounds - rarely
- Hand grasping – continuously
- Finger manipulation - frequently
- Push up to 35 lbs. Force (carts, pallet jack)
- Carry up to 35 lbs. (parts and tools) 20 feet - occasionally, 100 feet - rarely
- Lift at waist level up to 24 lbs. frequently/up to 50 lbs. - occasionally
- Lift to/from floor level (parts) 50 lbs.- occasionally
Compensation Information:
Machinist range is $22 to $26
Senior Machinist is up to $35
ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential.
As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship.
All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.
- Illinois Tool Works - - Responsibilities: Plan own work to maximize time and skills; Inspect own work to established process; Proficient at CNC programming, set up and run; Load a part into a machine, run the program, remove the part and inspect; Meet GD&T tolerances...Suggested
$23 - $32 per hour
...future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. Brenton is looking for a Machinist (Night Shift) who can set up and run open set-up mills and lathes, including turret lathe, tapping machines, and end hole machines...SuggestedHourly payNight shift- Illinois Tool Works - - Responsibilities: Program CNC machines: plan, set up, run, and verify parts; Inspect own work to GD&T tolerances and procedures; Maintain 5S and safety practices; Maximize setups and tooling efficiency for current and future jobs; Perform preventive...Suggested
- ...Structural Machinist / Peddinghaus Operator A New Challenge. A New Technology. A Great Opportunity. We’re looking for an experiencedmachinist, CNC operator, or skilled fabricatorwho is ready for a new challenge and excited to learn cutting-edge technology. This is an opportunity...Suggested
$20.5 - $25 per hour
...MachinistPay: $20.50 – $25.00 per hour Schedule: Multiple Shifts Available It's Not Guesswork. It's Mastery. If you've been searching for Machinist jobs in Alexandria, stop here. You'll run the machines, read the numbers, and deliver quality that speaks for itself. Uncover why...SuggestedHourly payWeekly payFor contractorsLocal areaShift work$24 - $35 per hour
...Job Description Job Title: Swiss Machinist Location: Alexandria, MN Compensation: $24.00-$35.00 per hour - paid weekly Schedule: 1st shift | 4 days per week | 10-hour shifts Job Type: Temporary About the Opportunity Doherty Staffing Solutions is...Hourly payWeekly payContract workTemporary workWork at officeLocal areaImmediate startShift workDay shift$22 - $28 per hour
...Job Description Job Description MACHINIST - DAY SHIFT Alexandria, MN (Douglas County, west central Minnesota) | Full-time, direct hire Schedule: Days, 4-day workweek, 10-hour shifts (may run 10 to 12 hours when needed) Pay: $22.00 - $28.00/hour depending on...Full timeWorldwideShift workDay shift$22 per hour
Our client, a leader in the manufacturing industry, is seeking a CNC Machine Operator to join their team. As a CNC Machine Operator, you will be part of the production department supporting machining operations. The ideal candidate will have attention to detail, strong...Hourly payFull timeTemporary workMonday to ThursdayShift workNight shift$20 per hour
Our client is seeking a CNC Set Up Operator to join their team. As a CNC Set Up Operator, you will be part of the manufacturing team supporting production operations. The ideal candidate will have a safety-first mindset, strong attention to detail, and the drive to continuously...Permanent employmentFull timeTemporary workFlexible hoursShift workDay shift$20 per hour
Our client, an industry leader in manufacturing and precision machining, is seeking a CNC Machine Operator to join their team. As a CNC Machine Operator, you will be part of the manufacturing department supporting production and quality assurance teams. The ideal candidate...Permanent employmentFull timeTemporary workMonday to FridayFlexible hoursShift workNight shiftAfternoon shift$22 - $34.51 per hour
...exceptional quality.If your skills and experience are a good match for this role please apply today. This opportunity is based on a CNC Machinist career path and is being offered by Staffmark to qualified candidates.Essential Duties And ResponsibilitiesEnsure that safety is...Hourly payWeekly payShift work$30 - $35 per hour
...CNC Lathe Setup Machinist Pay: $30.00–$35.00 per hour, depending on experience Schedule: Four-day workweek, Monday through Thursday Shift Options: First shift, early morning start times Location: Minnesota Work Setting: In person Company Overview A well-established...Hourly payMonday to ThursdayShift workDay shiftEarly shift$24 - $35 per hour
...About the job Swiss CNC Machinist Pay: $24.00 - $35.00 per hour Why This Is a Great Opportunity Enjoy a 4-day workweek on first shift with more time for life outside of work! Work with advanced CNC, Swiss-type lathes, and precision machining equipment...Hourly pay10 hours per weekDay shift$20 - $32 per hour
Now hiring for a CNC Programmer Location: Villard, MN Pay Rate: $20.00 - $32.00 per hour Schedule: 6:00 am - 4:30 pm, Monday - Thursday Where Every Cut Counts. Searching CNC Programmer jobs in Villard? Join a crew that respects...Hourly payWeekly payImmediate startShift work$22 - $23 per hour
Now hiring for a CNC Operator Location: Alexandria, MN Pay Rate: $22.00 - $23.00+ per hour (based on experience) Schedule: Night Shift | 4:30 PM - 3 AM | Monday - Thursday Weekend Shift | 5:30 AM - 5:30 PM | Friday - Sunday Microns Matter. Respect...Hourly payWeekly payFor contractorsWork at officeLocal areaImmediate startShift workNight shiftWeekend work$19.09 - $32.45 per hour
...interpret blueprints, drawings, and specifications Collaborate with engineering, programming, and production teams Train junior machinists and operators on standard processes --- Machines, Controls & Software You’ll work with equipment such as: Machines:...Hourly payFull timeContract workImmediate startShift workWeekend work$17 - $19 per hour
Our client, a leader in sustainable manufacturing and plastic recycling, is seeking a dedicated CNC Machine Operator to join their team. As a CNC Machine Operator, you will be an integral part of the manufacturing department supporting production and quality assurance...Hourly payFull timeTemporary workShift workDay shiftAfternoon shift$17.12 - $29.09 per hour
...with mills or lathes ~ Troubleshooting and machine adjustment experience ~2-year machining or technical degree --- Why Machinists Like Working Here Machinists choose this assignment because: ~ Clean, organized, production-focused shop ~ Strong benefits...Hourly payFull timeContract workImmediate startShift workWeekend work$17 - $19 per hour
CNC Machine OperatorOur client, a leader in sustainable manufacturing and plastic recycling, is seeking a dedicated CNC Machine Operator to join their team. As a CNC Machine Operator, you will be an integral part of the manufacturing department supporting production and...Hourly payShift workDay shiftAfternoon shift$19 - $31.22 per hour
Job Description Job Description Alexandria, MN - 2nd shift (Mon-Thur, 5:00pm-3:00am) The CNC Machine Operator is responsible for loading/unloading parts into Computer Numerical Control (CNC) machines, while ensuring finished parts meet customer specifications and...Hourly payTemporary workFlexible hoursShift workAfternoon shift$22 - $34.51 per hour
Job Description Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES - 1st shift, Mon-Fri, 6:30a-2:30p The following description of work to be performed by this individual is not intended to be all-inclusive. Rather, it focuses on the major tasks that must be accomplished...Hourly payTemporary workFlexible hoursShift workDay shift$19 - $31.22 per hour
Job Description Job Description Alexandria, MN - 3rd Shift (Sun-Thur, 10:30pm-6:30am) This position is responsible for loading and unloading parts into CNC machines, while ensuring finished parts meet customer specifications and company quality standards. This position...Hourly payTemporary workFlexible hoursNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Machinist. Be the first to apply!



