CNC Operator IV

$23.86 - $40.57 per hour

Howmet Aerospace

Responsibilities
About Howmet Aerospace
Howmet Fastening Systems (HFS) is seeking a CNC Operator level IV- 1st Shift for our Fullerton, CA location.
Operates and maintains, after set-up by others, any or all standard or specialized production machines in use by the company including but not limited to tappers, drillers, crimp and presses. Operator will be held to established production and quality standards. Incumbent will have control to make minor adjustments to the process or machines after tasks are assigned.
Requires, under guidance of senior personnel, the operation of CNC controlled machine tools to perform any sequence of programmed operation using programs and tool layouts provided.
Essential Duties and Responsibilities

Selects and sets proper tooling as identified on tool layout to correspond with program.

Makes set-ups by using typical tooling fixtures and indicating target diameters, hole alignments, or spindle run out.

Loads and proves out program and runs and self-inspects first article samples. Adjusts set-up as necessary to conform to dimensions and tolerances.

Completes as directed all necessary documentation for each set-up. Such as S.P.C. charts, set-up checklist, first article verification, etc.

Run, monitor and troubleshoot equipment in production, adjusting set-up as necessary.

Monitor tool life and dimensional characteristics of product. Replenish tooling as directed.

Monitor process using S.P.C. techniques.

Parts to be lifted and/or transported may weigh up to 30 lbs.

Reads blueprints and has the knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed.

Keeps work area clean, safe and in an orderly fashion on a daily basis.

Performs other tasks of equal or lesser skill as required.

Qualifications
Basic Qualifications:

Minimum of three years related experience and/or training in machine shop operation running a variety of machine shop equipment including CNC equipment; or equivalent combination of education and experience.

Ability to read and interpret blueprints and work instructions

Understanding of cutting tools (offset and geometry) and must know "G" and "M" Codes

Excellent troubleshooting skills

Willing to cross train and/or assist other departments to meet facility goals

Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required

Good communication skills

Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The employee is responsible to maintain fitness-for-duty while holding the above-described position and should be able to perform the essential tasks of the position in a safe, appropriate and effective manner. This refers to the physical, mental and emotional duties of the job.

Must be able to lift/move 30 lbs. (may not exceed per EHS policies)

Must be able to stand for long periods of time

Reaching above and below, stooping, kneeling, crouching, and bending.

Need to be able to wear safety steel toe shoes and walk around shop floor environment as needed.

Be able to remove dangling jewelry for shop floor assigned tasks, and wear hearing protection as needed.

Preferred Qualifications:

High School Diploma or GED equivalent

Understanding of 5S principals; Sort, Simplify, Shine, Standardize and Sustain

SPC knowledge highly desirable

Benefits/Salary:
The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $23.86 to $40.57.
About Us
Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email [email protected]

Apply

Vacancy posted 4 days ago

Similar jobs that could be interesting for youBased on the CNC Operator IV in Fullerton, CA vacancy

Senior CNC Operator: Precision Machining & Setup
$23.86 - $40.57 per hour
...Howmet Aerospace Inc. is hiring a CNC Operator level IV for its Fullerton, CA location. The role involves operating and maintaining CNC machines, ensuring production and quality standards. Candidates must have at least three years of relevant machine shop experience, the...
Suggested
Hourly pay
Howmet Aerospace Inc.
Fullerton, CA
5 days ago
Tool Maker IV, Machine Build- 1st Shift
$23.86 - $40.57 per hour
...Fastening Systems (HFS) is seeking a Tool Maker IV, Machine Build- 1st Shift for our... ...tooling to prints, or from sketches utilizing CNC mills Lathes and surface grinders. Make... ...Basic preventive maintenance on equipment operated. Demonstrate Working knowledge of...
Suggested
Local area
Worldwide
Flexible hours
Day shift
Howmet Aerospace
Fullerton, CA
2 hours ago
CNC Machinist
...SUMMARY: We are seeking an experienced CNC Machinist for our 1st shift based in Brea, CA location. Operate the CNC machine in the most efficient manner possible... ...holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to...
Suggested
Permanent employment
For contractors
Work experience placement
Work at office
Local area
Day shift
AMRO Fabricating
Brea, CA
4 days ago
CNC Operator III- 2nd shift
$21.17 - $35.99 per hour
...Responsibilities Howmet Fastening Systems (HFS) is seeking a CNC Operator III- 2nd Shift for the Fullerton, CA site. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems...
Suggested
Flexible hours
Afternoon shift
Howmet Aerospace
Fullerton, CA
3 days ago
CNC Machine Operator
...CNC Machine Operator/Machinist Job Summary & Responsibilities We are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring positions, first...
Suggested
OurStaff, LLC
Fullerton, CA
1 day ago
CNC Lathe Operator V (2nd Shift) - Expert Machinist
$27.32 - $46.45 per hour
...Howmet Aerospace is seeking a CNC Operator V for its Fullerton, CA facility, focusing on precision machining and equipment operational excellence. The candidate will manage CNC operations, ensuring high-quality standards and assisting in equipment maintenance. The position...
Hourly pay
Afternoon shift
Howmet Aerospace
Fullerton, CA
1 day ago
CNC Lathe Operator - 1st Shift + $27-29/hr Bonus
$27 - $29 per hour
...Howmet Aerospace is hiring a CNC Lathe Operator in Fullerton, CA. This full-time position requires 3-5 years of experience operating CNC lathes, including the ability to set up CNC machines and interpret engineering drawings. Key responsibilities include manufacturing...
Full time
Day shift
Howmet Aerospace
Fullerton, CA
1 day ago
CNC Lathe Operator - 2nd Shift (FANUC, Mastercam, GD&T)
$27 - $29 per hour
...Howmet Aerospace in Fullerton, CA is hiring a CNC Lathe Operator for the 2nd shift. This full-time role involves manufacturing products in accordance with engineering drawings, maintaining machinery, and requires 3-5 years of operation experience with CNC lathes. Knowledge...
Full time
Shift work
Afternoon shift
Howmet Aerospace
Fullerton, CA
1 day ago
CNC Lathe Operator - 2nd shift
$27 - $29 per hour
...ability to lawfully obtain access to such items Responsibilities Salary Range: $27.00-29.00/hr + 12% shift differential Shift: CNC Lathe Operator 2nd shift Mon‑Fri 3:30pm‑12:00am Position Overview: As a CNC Operator, you'll be part of our team located in Fullerton, CA....
Full time
Shift work
Afternoon shift
Howmet Aerospace
Fullerton, CA
1 day ago
CNC Set - Up Operator
$25 per hour
Summary/objective The CNC Set-Up Operator sets up and operates two or more CNC machine tools, bar loaders and feeders, to specification on a production basis. Ensures work is performed ethically while achieving the objectives stated in the Company Quality Policy. Ensures...
Hourly pay
Full time
Local area
Caliber Aerospace
Santa Fe Springs, CA
4 days ago
CNC Lathe Operator
...CNC Operator The CNC Operator must be able to set-up and operate computer programmed machines. Along with being able to operate the machinery... ...green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the...
Permanent employment
For contractors
Local area
Immediate start
Afternoon shift
Karman Space & Defense
Santa Ana, CA
4 days ago
CNC Lathe Operator - 2nd shift
$27 - $29 per hour
...Responsibilities URGENTLY HIRING Salary Range: $27.00-29.00/hr + 12% shift differential Shift: CNC Lathe Operator' 2nd shift Mon-Fri 3:30pm-12:00am Position Overview: As a CNC Operator, you'll be partof our team located in Fullerton, CA. Key Responsibilities...
Immediate start
Shift work
Afternoon shift
Howmet Aerospace
Fullerton, CA
6 days ago
VTL Machinist- 2nd Shift
...experienced VTL Machinist for our 1st shift based in Brea, CA location. Operate the CNC machine in the most efficient manner possible by assuring that... ...green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the...
Permanent employment
For contractors
Work experience placement
Work at office
Local area
Monday to Friday
Day shift
Afternoon shift
Karman Space and Defense
Brea, CA
6 days ago
CNC Programmer
$40 - $55 per hour
...customer the competitive advantage to succeed in their business. Category Manufacturing Description Overall Purpose: The CNC Programmer is responsible to write and prove new and existing programs to ensure dimensionally correct machined components. Essential...
Permanent employment
Full time
Part time
Shift work
HydraFlow
Fullerton, CA
2 days ago
CNC Machine Operator
...CNC Machine Operator Schedule: ~ Monday – Friday ~4:00 PM – 2:30 AM ~ Training: 1 week on 1st Shift (6:30 AM – 4:30 PM) ~ Job Term: Temp to Hire Position Summary: The CNC Lathe Machinist is responsible for operating, programming, and troubleshooting...
Temporary work
Monday to Friday
Day shift
Fairway Staffing Solutions
Garden Grove, CA
6 days ago
CNC Machine Operator
...CNC Machine Operator We are seeking a skilled CNC Machine Operator with a strong background in operating and programming Bystronic, Homag or Zund machines. As a CNC Machine Operator, you will be responsible for setting up, adjusting, and operating computer numerical...
Monday to Friday
Shift work
Capsule Manufacturing Inc
Anaheim, CA
6 days ago
Cnc Machine Operator
$20 - $26 per hour
...Job Title : CNC Machine Operator Job Type : 1st/2nd Shifts Pay Rate :$20-$26 Job Description : We are currently seeking a skilled and reliable CNC Machine Operator to join our team. The CNC Machine Operator will be responsible for setting up, operating, and...
Day shift
Afternoon shift
Partners Personnel Management
Garden Grove, CA
6 days ago
CNC Operator 1
$20.5 - $24.5 per hour
...CNC Mill Operator I & II – Immediate Hiring Walnut, CA $20.50 – $24.50/hr. DOE Full-Time | Overtime Available | Career Growth Ready to grow your CNC machining career with a stable and team-oriented company? We are currently seeking dependable and motivated CNC...
Full time
Immediate start
Day shift
Afternoon shift
AtWork!
Walnut, CA
6 days ago
CNC Knife Operator
...CNC Knife Operator Anaheim, CA, USA 21.00-23.00 per hour DOE Hourly Full Time Summary The CNC Knife operator (Gerber Machine) personnel will help with reading and understanding detailed instructions on how to operate machines, look at interpret drawings...
Hourly pay
Full time
Monday to Friday
SON-AERO (Sonfarrel Aerospace)
Anaheim, CA
4 days ago
CNC Machinist/Operator
$28 - $35 per hour
...POSITION SUMMARY CNC Operator/Machinist oversees our computer numeric controlled (CNC) machines. Responsible for ensuring company produces quality parts and tools specific to engineering drawings and client standards. CNC Operator/Machinist is a highly skilled profession...
Hourly pay
Work at office
Shift work
Afternoon shift
Unitech Composites
Santa Ana, CA
3 days ago
CNC Programmer
$42 per hour
...Salary: $42.00/hr + eligibility for annual bonuses Shift: CNC Programmer ' 1st Shift Position Overview: We're seeking a... ...3 axismachining, 5 axis simultaneous machining and CNC turning operations. ' Proficient in CAM software (Edgecam,Mastercam). ' Experience...
Shift work
Day shift
Howmet Aerospace
Fullerton, CA
4 days ago
CNC Programmer
$30 - $38 per hour
Position Title: CNC Programmer Location: Montebello, CA 90640, USA Job Category: Manufacturing Req ID: CNCPR001448 Schedule: Full Time... ...and development of machine tooling Proficient in set up and operation of Turrets, Laser, Panel Bender, Safan First article...
Hourly pay
Full time
Local area
Remote work
Worldwide
Flexible hours
Weekend work
SEB Professional
Placentia, CA
2 days ago
CNC Operator
$23 per hour
...will be doing Job Duties and Responsibilities: • Set-up CNC machines • Perform first article inspections & necessary paperwork... ...complete the application, please contact Hydro Recruiting via email at ****@*****.*** CNC Operator Location:
Hourly pay
Local area
Flexible hours
Shift work
Norsk Hydro
Rowland Heights, CA
5 days ago
CNC Operator
$25 - $28 per hour
...established precision manufacturing company serving highly regulated industries has an immediate full‑time opening for an experienced CNC Machinist. This on‑site role offers long‑term stability and the opportunity to support a growing production environment. Hours: 1st...
Hourly pay
Full time
Local area
Immediate start
Monday to Friday
Flexible hours
Day shift
Jobot
Anaheim, CA
2 days ago
CNC Machine Operator
...CNC Machine Operator Job Description Job Information Job Title: CNC Machine Operator Department: Manufacturing Reports To: Production Supervisor / Manufacturing Manager Location: Anaheim, CA Effective/Revision Date: 5/2026 Role Purpose...
Permanent employment
Work experience placement
Local area
Pinnacle Percission Sheet Metal
Anaheim, CA
5 days ago
CNC Machinist, 5-Axis
...SUMMARY: We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our Santa Ana, CA location. Operate the CNC machine in the most efficient manner... ...holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain...
Permanent employment
For contractors
Work experience placement
Work at office
Monday to Friday
Afternoon shift
AMRO Fabricating
Santa Ana, CA
4 days ago
CNC Machinist
$25 - $32 per hour
...Responsibilities Salary Range: $25.00-$32.00/hr Shift: CNC Machinist ' 1st Shift (4:00am-2:30pm) Key Responsibilities:... ...trainings Qualifications BasicQualifications ' 3+ years of operation experience withCNC Lathes (such as Okuma, Takisawa, Swiss,...
Shift work
Day shift
Howmet Aerospace
Brea, CA
6 days ago
CNC Operator 1
$19 per hour
...Job Location: Yorba Linda, CA Pay Range: $19.00 Hours: 6am-2:30pm Mon-Fri The CNC Operator is responsible for setting up and operating CNC machines to produce precision components according to specifications. The role requires technical skill, attention to...
Immediate start
Pexco
Yorba Linda, CA
3 days ago
CNC Operator/Machinist (skilled) - 2nd shift
$19 - $30 per hour
...Overview CNC MACHINIST* (2nd SHIFT, Mon.-Fri. 2 PM – 10:30 PM)+ overtime, may including Saturdays Salary Range: $19.00 - $30.... ...DOING Responsible for performing production and manufacturing operations to meet daily production requirements. Maintain a safe work...
Temporary work
Seasonal work
Immediate start
Shift work
Afternoon shift
Snap-on Inc
Hacienda Heights, CA
3 days ago
2nd Shift, CNC Operator II
$22 - $27 per hour
...Responsibilities Howmet Fastening Systems (HFS) is seeking a 2nd Shift, CNC Operator II for our City of Industry, California location. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered...
Afternoon shift
Howmet Aerospace
La Puente, CA
4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Operator IV. Be the first to apply!