Screed Operator
$46.25 per hourMcGough Construction
Department: Field Operations Work Location: 11-County Metro Area (Twin Cities, MN) Job type: Full-Time / Seasonal Pay Type / Range: Journeyman Union Scale. $46.25 per hour (based on experience and/or size and type of equipment)
(This pay range is a good-faith estimate of compensation for this role.) Union Benefits & Additional Information:
Bituminous Roadways, Inc. is committed to building a diverse workforce. We are proud to be an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, creed, religion, national origin, sex (including pregnancy, gender identity, and sexual orientation), marital status, familial status, age, disability, genetic information, status with regard to public assistance, veteran status, or any other characteristic protected by applicable law. Equal Opportunity Employer, including disabled and veterans.
(This pay range is a good-faith estimate of compensation for this role.) Union Benefits & Additional Information:
- Operating Engineers Local 49 Union (
- Health & Welfare Benefits and Pension would all remain through your union.
- As a salaried employee, you will be a non-bargaining union member.
- Mental Health & Wellness Support provided through TEAM EAP.
- PTO (ESST) Program covering all time away from work.
- Referral bonuses - earn rewards to help us recruit new talent.
- Annual boot allowance.
- Set up and operate screed controls to apply asphalt at proper grade and thickness.
- Monitor material flow, paving speed, and mat consistency throughout the project.
- Adjust screed crown, slope, and extensions during operation for proper mat profile.
- May perform other related duties to include adding or removing screed extensions.
- Assist with daily pre-operation inspection and maintenance of paving equipment.
- Communicate with paver operator and ground crew to ensure consistent, high-quality paving.
- Observe and correct material segregation, mat defects, and edge lines as needed.
- Maintain cleanliness of screed and related components to prevent material buildup.
- Display a professional and respectful attitude towards co-workers, supervisors, inspectors, and the general public at all times.
- Willingness to work in a team environment and assist co-workers or supervisors.
- Communicate effectively with crew members and supervisors.
- Follow company and industry safety standards and procedures at all times.
- 1-3 years of experience operating asphalt paving equipment, especially the screed.
- Familiarity with grade and slope control systems (automated or manual).
- Strong understanding of asphalt compaction, temperature requirements, and best paving practices.
- Ability to read grade stakes, plans, and use leveling instruments is a plus.
- Team-oriented with strong communication skills.
- Reliable, punctual, and committed to safety and quality.
- Must be safety-conscious, reliable, and able to work well in a team environment.
- Willingness to work extended hours, early mornings, and weekends as needed.
- High school education or GED equivalent.
- Strong team player
- Reliable and on-time.
- Safety - Safety in the workplace is a mutual responsibility of the employer, management and all employees. We have an expectation that all employees will play an active role in workplace safety and always promote a positive safety culture.
- Quality - Quality is the best business plan. It is an investment in our future. Quality leads to consistency. Consistency leads to happy employees, satisfied customers and a growing business.
- Respect - Respect at work is crucial as it promotes healthy relationships between coworkers and managers, as well as outside the organization. A respectful employee is a sign of a respectful organization and therefore creates a positive image of our company and our workplace.
- Integrity - Real integrity is doing the right thing, whether someone realizes it or not. Displaying Integrity helps build trust and drives a certain level of expectation. Integrity is choosing your thoughts and actions based on values rather than personal gain.
- Commitment - Commitment is the bond employee's share with their organization and its employees. Committed employees bring exceptional value to the organization through their support, productivity, determination, reliability and quality. Commitment shows and can be contagious.
- Family owned and operated
- Paid Training
- Advancement opportunities - we aim to promote within
- No out of town jobs / home every night
- Family Oriented - Annual events
Bituminous Roadways, Inc. is committed to building a diverse workforce. We are proud to be an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, creed, religion, national origin, sex (including pregnancy, gender identity, and sexual orientation), marital status, familial status, age, disability, genetic information, status with regard to public assistance, veteran status, or any other characteristic protected by applicable law. Equal Opportunity Employer, including disabled and veterans.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Screed Operator in Saint Paul, MN vacancy
- ...Screed Operator The Screed Operator is responsible for controlling the screed on the asphalt paver, ensuring proper depth, width, and slope of the asphalt mat during paving operations. This role is essential to producing a smooth, even surface and requires strong attention...SuggestedFor contractorsNight shiftWeekend workEarly shift
- ...Screed OperatorThe Screed Operator is responsible for controlling the screed on the asphalt paver, ensuring proper depth, width, and slope of the asphalt mat during paving operations. This role is essential to producing a smooth, even surface and requires strong attention...SuggestedFor contractorsWeekend workEarly shift
- ...Job Description IAA, an RB Global, Inc. company is seeking a Loader Operator to join our team. At IAA Loader Operators are essential to the success of our branch operations. They utilize our front-end loaders to maneuver vehicles around our facilities in preparation...SuggestedFull timePart timeImmediate start
- ...Excavator Operator The Excavator Operator is responsible for safely and efficiently operating an excavator to achieve proper trench depth, grade, and finished cross-section for construction activities. This role includes making routine operating adjustments, changing...SuggestedFor contractorsNight shiftWeekend workEarly shift
- ...compensation and great benefits. It's all here and it's exactly what going further is all about. Position Summary Operates various tractor trailer combinations over long distances to deliver freight in a safe, claims-free, and cost-efficient manner....SuggestedLocal areaLong distanceFlexible hoursNight shift
- ...experience.Maintain all service levels by being Prepared, Welcoming, Meet the Needs & Be There for all our customers, this includes all operational checklist task and meeting customers emotional and practical needs.Responsible for providing an exceptional service experience to...Part time
$24 - $34 per hour
...Discover a more connected career At TelCom Construction, LLC, as an Traveling Equipment Operator on our Telecom Construction team, you'll use and take care of special machines for putting in phone and internet infrastructure, making sure everything works right and stays...Work experience placementRemote work- ...Paver Operator The Paver Operator is responsible for the safe and efficient operation of asphalt paving machines to lay asphalt on... ...attention to detail, and the ability to work closely with the screed operator and ground crew to ensure smooth, level pavement. Other...For contractorsNight shiftWeekend workEarly shift
$20 per hour
...Equipment Operator Venture Solutions, a Taylor Corporation company, is looking for an Equipment Operator to join the team on 2nd shift in Arden Hills, MN. This location adheres to the Federal Information Security Management Act (FISMA). All employees must undergo a...Hourly payMonday to FridayFlexible hoursShift workAfternoon shift$15 - $18 per hour
...statement, "to create the most enjoyable shopping experience possible for our Guests." The Seamstress/Tailor performs a variety of operational tasks to support the execution of alterations in the store, including the hemming of jeans and pants.Compensation & Benefits: Pay...Hourly payFull timeTemporary workPart timeFlexible hoursDay shiftAfternoon shift$23 - $28 per hour
...Setup TechnicianThis role supports a metals manufacturing division by setting up vertical mills and punch presses so production operators can run them efficiently and safely. You will work closely with engineering and design teams to improve tooling and final products,...Permanent employmentFull timeTemporary work$20.5 - $22.5 per hour
...Job Description Job Description Machine Operator – Start Immediately | $20.50 - $22.50/hr | Weekly Pay | 1st & 3rd Shift Join a fast‑paced food‑production team where you’ll operate high‑tech equipment, support continuous production, and help create high‑quality products...Weekly payContract workTemporary workWork at officeImmediate startMonday to FridayShift workNight shiftDay shift$21 per hour
...Job Description Job Description Labor Solutions is hiring Machine Operators! Don’t miss this great opportunity to join our team. Apply today and take the next step toward a rewarding career with Labor Solutions! Pay: $21.00/hr. to start (potential increase to $...Temporary workFor contractorsSummer workShift work$28 per hour
Job Description Job Description Overview Tradesmen International is immediately hiring experienced Machinist for projects located in or around White Bear Lake, MN . This is a first shift opportunity and the pay rate is up to $28/hour based on experience and...Work at officeImmediate startDay shift$18 - $22 per hour
...multiple roles in a manufacturing facility including driving forklift, packing cases, palletizing bags/block/cases, labelling product, operating batching & mixing systems, operating liquid packaging filling equipment, and/or operate block production equipment, depending on...Hourly payWork at office- ...Operator ISchedule: 7AM-3:30PM As an Operator I, you'll work under direct supervision, performing routine and repetitive assembly operations and processes.What You'll Work On:Ensure that relevant job documentation for cell operations and functions is accurate and up to...Local area
- ...exceptional craftsmanship and innovative solutions to our clients in the Twin Cities Area. Responsibilities: Oversee daily operations and manage carpentry projects from start to finish. Coordinate and supervise a team of carpenters, ensuring quality and efficiency...Flexible hours
- ...Loader Operator Kemps in Minneapolis has an opening for a Loader Operator in our cooler. This role will operate equipment according to established procedures, manufacture products, and assist in other department areas as needed. Job Duties and Responsibilities...Work experience placementImmediate start
$36 - $40 per hour
Job Description Job Description Description: Urgently Hiring Foreman/Siding Expert Needed About Us: Tacheny Exteriors is a fourth-generation, family-owned home remodeling company that specializes in roofing, siding, gutters, windows & doors, soffit & fascia...Hourly payFull timeImmediate start$25 - $38 per hour
...growth with an established company What You'll Do Design and machine custom parts and components to support manufacturing operations Set up and operate manual and CNC machining equipment, including mills, lathes, and drill presses Utilize CAD/CAM software...Full timeTemporary workMonday to FridayDay shift- ...start ASAP after screenings have cleared * Will Need to Gown-up, use Hair Net, Beard Net, Shoe Covers, Safety Glasses * Requires the operating of electrical Torch drivers & Screw Drivers * Experience Required: 1 to 3 years of experience in "Clean-Room" working with Medical...Casual workLocal areaImmediate startMonday to ThursdayShift work
$23.13 - $32.69 per hour
...with other team members to solve problemsPassionate about maintaining a safe working environment for yourself and othersAbility to operate standard hand and power toolsDetail orientatedAll team members are expected to demonstrate the following characteristics:Work and build...Hourly payWork experience placementH1b- ...Job Description Job Description The Machine Operator position is an integral part of our manufacturing production line. Each position is responsible for producing a component or contributing towards the end product. These positions are interchangeable and will fill...Shift workDay shiftAfternoon shift
$35 per hour
...Description CNC Mill Machinist Up to $35/Hour Depending on Experience | 1st Shift | Custom Job Shop Job Description Set up and operate Haas VF-Series CNC Mills (VFN & VF4) Machine custom parts from blueprints and engineering drawings Perform program edits,...Weekly payPermanent employmentContract workTemporary workWork at officeDay shift$62.4k - $76.96k
...markets. What You’ll Do Solve complex machining challenges with strong problem‑solving and creative thinking Program and operate 3, 4, and 5‑axis CNC mills and CNC turning centers (Haas + DMG Mori/Siemens preferred) Perform CAM programming, fixture design, and...Weekly payPermanent employmentTemporary workWork at office- ...Job Description Operate computer numerical control (CNC) machines, including mills and lathes, to fabricate precision parts. This role requires interpreting part drawings or job instructions, executing setups, fabricating components, and performing inspections with...Contract workShift work
$35 - $45 per hour
...tool performance and coordinate replenishment of critical tooling Collaborate with engineering, quality, production, and machine operators to support manufacturing goals Maintain accurate program documentation and implement engineering changes as needed What We'...Contract work$66.56k - $93.6k
...Optimize: Develop, write, and optimize CNC programs for multi-axis equipment based on our core machining capabilities. Setup & Operation Support: Assist in setting up and operating CNC machines when validating new programs. Material Handling: Load and unload...Temporary workShift workNight shiftWeekend workDay shiftAfternoon shift$20 - $24 per hour
...Machine OperatorAdvance your manufacturing career while earning a competitive wage, weekly paycheck, and benefits in this machine operator role! As a CNC machine operator, you'll be responsible for operating CNC machinery, inspecting parts for accuracy, and maintaining...Afternoon shift$35 per hour
...work, variety, and machining custom one-off and short-run parts, this is an excellent opportunity. What You'll Do Set up and operate Haas VF-Series CNC Mills (VFN & VF4) Machine custom parts from blueprints and engineering drawings Perform program edits,...Weekly payPermanent employmentContract workTemporary workWork at officeDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Screed Operator. Be the first to apply!
Related searches
- material handling operator Saint Paul, MN
- systems operator Saint Paul, MN
- medical device operator Saint Paul, MN
- technical operator Saint Paul, MN
- vehicle operator Saint Paul, MN
- operator unilever Saint Paul, MN
- call center operator Saint Paul, MN
- cashier phone operator Saint Paul, MN
- swimming pool operator Saint Paul, MN
- machine set up operator Saint Paul, MN


