MECHANICAL ENGINEER
Naval Sea Systems Command
Summary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. Learn more about this agency Duties Help
- You will serve as the technical representative on the contractor's design/build teams for propulsion systems and components.
- You will facilitate the identification and mitigation of design, construction, and program process risks, while monitoring team progress in achieving timely product delivery.
- You will review reports and prepare technical comments and recommendations on the design, overhaul, repair, testing, fabrication, and operation of submarine propulsion systems and components.
- You will evaluate and develop technical solutions for government and contractor-furnished equipment deviations, waiver requests, and material substitutions for submarine overhaul and repair projects.
- You will review and evaluate equipment qualification tests for technical adequacy and equipment meeting operation requirements.
- You will review complex calculations in the analysis of contractor-prepared studies (Fluid flow/pressure, heat transfer, pipe stress, component stress analysis, threaded joint analysis).
- You will review, evaluate and prepare technical recommendations for the approval of technical manuals, shipbuilding specifications, technical specifications, and purchase specifications.
- You will investigate, perform inspections, and evaluate emergent design and waterfront problems, recommending solutions.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the MECHANICAL ENGINEER in Groton, CT vacancy
$109k - $120k
Mechanical Design Engineer, Lead At Curtiss Wright we specialize in in the design, engineering and manufacturing of components/systems for the aerospace and defense sectors. Our facility in Monsey, NY has a focus on electrical units and housings for navy applications.The...SuggestedFull timeFor contractors- ...Mechanical Engineering Design You will perform mechanical engineering design for a wide variety of installation shore facility types. You will analyze and design extensive engineering alterations and modifications to existing facilities to meet customer needs....SuggestedContract workFor contractors
- ...Job Title Job Description You will serve as the technical representative on the contractor's design/build teams for mechanical fluid systems and components (pipe, valves, etc). You will facilitate the identification and mitigation of design, construction, and...SuggestedFor contractorsRemote work
- ...Senior Mechanical Engineer ThayerMahan, an leader and a fast-growing, mission-focused, innovative technology company in the Intelligence, Surveillance, and Reconnaissance (ISR) and Artificial Intelligence (AI) space is seeking a highly skilled and experienced Senior...Suggested
- ...Senior Mechanical Engineer The Electric Boat shipyard is experiencing a period of unprecedented growth. Existing facilities are undergoing renovations and new buildings are under construction. Now is a once in a lifetime opportunity to be a part of a dynamic team responsible...SuggestedWork at officeLocal area
- Summary You will serve as a Mechanical Engineer in the Planning, Design and Construction Directorate of NAVFAC ENGINEERING CMD MID-ATLANTIC. Duties You will perform mechanical engineering design for a wide variety of installation shore facility types.You will analyze and...Contract workFor contractorsInternshipWork at officeLocal areaImmediate startRelocationRelocation package
- Ata Glance Legrand has an exciting opportunity for a Mechanical Engineer II to join the Data Center Power and Control Team in New London, CT and Conover, NC . The Mechanical Engineer II will be responsible for the design of new product, opto-mechanical components, and fiber...
- Legrand has an exciting opportunity for a Mechanical Engineer II to join the Data Center Power and Control Team in New London, CT. The Mechanical Engineer II will be responsible for the design of new product mechanical components and assemblies, including product test validation...Work at office
$99.2k - $165.4k
...SUMMARYThis position will provide technical leadership and operational engineering oversight for 24x7x365 delivery of critical site utility... ...Leadership Serve as SME or Site Engineer Lead for all mechanical utility systems, including: Combustion turbine / cogeneration...Permanent employmentFull timeContract workFor contractorsH1bWork at officeLocal areaVisa sponsorshipWork visaRelocation packageShift workDay shift$104k
...Job Description Job Description Senior Mechanical Engineer |New London, CT | Direct Hire | Up to $104,000 DOE What Matters Most: Direct hire opportunity with a global manufacturing and technology leader Salary up to $104,000 , depending on experience...Work at office- ...Naval Architect You will serve as Naval Architect in the Engineering Department, Supervisor of Shipbuilding, Conversion, and Repair (SUPSHIP) in the design, construction, overhaul and repair of nuclear-powered submarines. You will review, analyze, research, prepare...Contract workFor contractors
$70k - $90k
...solutions in the areas of Information Technology, Test & Evaluation, Engineering & Analysis, and Training.This position is 100% Onsite.... ...Support (ATIS) System.Design and/or analyze pressurized mechanical systems for hydraulics, pneumatics, and seawater to meet requirements...For contractorsWork at office$99.2k - $165.4k
ROLE SUMMARYThis position provides technical leadership and engineering oversight and is fully accountable for 24x7x365 delivery of critical... ...and ExperienceBachelor’s degree in engineering (Mechanical, Chemical, Electrical, or related discipline) Minimum of 5 years...Permanent employmentFull timeFor contractorsH1bWork at officeLocal areaVisa sponsorshipWork visaRelocation packageShift workDay shift- ...Responsibilities for this Position Nuclear Test Electrical Engineer US-CT-Groton Job ID: 2026-19153 Type: Full-Time # of Openings: 2 Category: Engineering EB Groton Shipyard Overview Nuclear Test Electrical Engineering is responsible for...Full time
- ...We are a large growing mechanical contractor that works on many large mechanical hvac and plumbing projects. This is a full-time position... .... Attend preconstruction meeting. Meet and mentor all project engineers and field manpower. Manage, approve, organize, and document...Full timeFor contractorsFor subcontractorLocal area
$176.6k - $294.3k
The Director Engineering- Team Lead will lead a team responsible for developing AI-enabled marketing platforms, focusing on scalable, reusable data capabilities and real-time decisioning systems in cloud and AI environments. The role involves defining platform vision, architecting...Permanent employmentFull timeH1bLocal areaVisa sponsorshipWork visaRelocation package2 days per week3 days per week- ...EDUCATION/EXPERIENCE: High school Diploma or equivalent. High mechanical comprehension. Previous welding and/or machining experience is... ...entail knowledge of electro‑mechanical applications, motors, engines, pumps, vacuum and pneumatic systems, heating, ventilation, piping...
- Process Engineer - Groton, CT Doncaster’s Structural Castings of Groton is excited to announce that they are seeking an experienced Process Engineer to join their team based in Groton, CT. This is a full‑time position. In this role you will use your expertise and experience...Full time
$99.2k - $165.4k
...SUMMARYThis position will provide technical leadership and operational engineering oversight for 24x7x365 electrical generation, distribution,... ...off-shift schedulesEntry and work in laboratories, vivarium, mechanical/electrical rooms, central utility plants, maintenance shops,...Permanent employmentFull timeFor contractorsH1bWork at officeLocal areaVisa sponsorshipWork visaRelocation packageShift workDay shift- ...Workplace Awards 2025 Winner and an AWEI Bronze Tier LGBTQ+ Inclusive Employer.Job DescriptionAs an Associate Director - Structural Engineer (NSQEP), you will provide technical leadership on complex structural engineering projects across the defence, research and nuclear...Job sharingPart timeWork at officeImmediate startRemote workRelocationFlexible hours
- ...Senior Software Engineer - D425 Hull, Mechanical & Electrical SystemsYou're the kind of engineer who loves understanding how complex systems come together and you take pride in building software that absolutely must work. You enjoy digging into requirements, tackling...For contractors
$18 - $26 per hour
Frito-Lay is seeking Warehouse Workers / Material Handlers to work in distribution centers loading, unloading, moving, and organizing snack products for delivery routes. Warehouse Workers are responsible for loading delivery trucks with product, unloading incoming shipments...Hourly payFull timeWork at officeShift workNight shiftWeekend work- ...team player to join our group of Technology professionals. We are looking for a talented “AN/BYG-1 Submarine Combat Control System Engineering Technician” to support ongoing submarine modernization efforts. This is a full-time position working out of Groton, CT. If you...Full timeFlexible hours
$28 - $40 per hour
Waste Management is seeking Diesel Mechanics to inspect, maintain, and repair diesel-powered garbage trucks and heavy equipment used for... ...mechanical issues, performing preventative maintenance, repairing engines, transmissions, brakes, hydraulic systems, electrical systems,...Hourly payFull timeRelocation packageShift workNight shiftAfternoon shift$50k - $75k
..., and accountability among all team members Qualifications: ~3+ years of previous experience as an automotive technician, mechanic, or other related fields ~ Deadline and detail-oriented ~ Your own Tools and Transportation ~ Electrical ~ Brake Work ~...Weekly payLocal area$18 - $23 per hour
Entry Level Automotive TechnicianLet's Connect APPLY TODAY To Schedule Your On Site Interview!The pay range for this position is $18.00 - $23.00/hr; however, base pay offered may vary depending on factors such as job-related knowledge, skills, experience, and market location...Shift work- ...Project Engineer D498, COLUMBIA Weapons & Mechanical Systems, is responsible for the COLUMBIA Class HM&E (Hull, Mechanical, and Electrical) design products. D498 engineers work as a team with D453 Mechanical Design to complete COLUMBIA Class Rev A design disclosures...Permanent employmentFull timeWork at officeRelocation
- ...Engineering Supervisor Requisition ID 2026-20126 Location US-CT-Groton Seat Location EB Groton Shipyard Trade Engineering Shift 1st Security Clearance Required Top Secret Overview General Dynamics...Work at officeShift work
- ...Ceramics Engineer Opportunity Do you have strong analytical skills? Do you enjoy solving problems? Doncasters Precision Castings of Groton is excited to announce that they are seeking an experienced Ceramics Engineer to add to their team based in Groton, CT. We are...Full time
- ...Overview D498, COLUMBIA Weapons & Mechanical Systems, is responsible for the COLUMBIA Class HM&E (Hull, Mechanical, and Electrical) design products. D498 engineers work as a team with D453 Mechanical Design to complete COLUMBIA Class Rev A design disclosures and COLUMBIA...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MECHANICAL ENGINEER. Be the first to apply!


