Automation System Designer (Electrical Engineering)
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
- Ensure all Hanwha Philly Shipyard’s safety procedures, rules and regulations are performed and met
- Perform basic and detail design activities for assigned systems, including calculations, diagrams, drawings, design change notices, and equipment selection relevant to assigned systems
- Assigned Systems, including but not limited to Alarm and Monitoring, Fire Detection and Alarms, and Alarm Signaling Systems
- Participate in basic and detail design activities within the Electrical Design Department, including review of design documents from other shipyard engineers, vendors, and external design partners
- Coordinate and assist the fabrication, assembly, installation, and/or testing of assigned systems, and equipment
- Prepare technical specifications, collect vendor information and maintain maker’s list for assigned systems
- Generate and access Bills of Material and provide technical support for material tracking, logistics, handling, and timing of installation
- Propose technical improvements; develop and implement quality standards applicable to assigned systems
- Interface with Owner and Class to resolve technical issues
- Develop testing procedures for assigned systems
- Provide field engineering support as required to support production activities during Class and owner inspections or responding to production questions arising during vessel construction
- Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to assigned systems
- Perform other related duties as required and assigned
- Able to communicate effectively with all levels of the organization, both verbal and written
- Decision making/problem solving
- Organizational understanding
- Willingness and ability to work as a team member
- Conflict resolution
- Strategic thinking
- Stress management
- Teamwork
- Bachelor's Degree in Automation and Electronic Systems is preferred; however, candidates with a technical diploma and 10+ years’ experience in ship design and/or construction may also be considered
- Minimum 10 years’ experience in shipbuilding, Automation and Electronic Systems Specialization, or manufacturing
- Experience with Automation System or Control system design and construction
- Proficiency with MS Office and CAD systems such as AutoCAD
- Knowledge/experience concerning basic and detail ship design
- Knowledge/experience concerning modern shipbuilding practices
- Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as international experience or familiarity with European and/or Asian Shipbuilding Standards
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Automation System Designer (Electrical Engineering) in Paulsboro, NJ vacancy
- Full-Time Open Rank Teaching Professor Position Electrical & Computer Engineering / Electrical Engineering Technology - Henry M... ..., instrumentation & measurement, embedded systems & IoT, PCB design, control systems, automation, industrial networks and communications, and...SuggestedFull timeSummer workVisa sponsorshipWork visa
- NDI Engineering Company is seeking an Electrical Engineer to support the design of US Navy test facilities. This position will be based out of our office in Thorofare,... ...candidate will have experience in electrical systems design, development, and testing, specifically...SuggestedFull timeFor contractorsWork at office
- ...Electrical Engineer (Philadelphia, PA) Position Summary: The Electrical Engineer will provide... ...; feasibility studies; preliminary design activities; contract design activities;... ...studies related to ships/boats/craft, ship systems and/or shipboard equipment....SuggestedContract workFor contractorsWork at officeImmediate startFlexible hours
- PBF Energy is seeking an Instrument/Analyzer Engineer to support maintenance, reliability, and capital projects focusing on instrumentation and safety systems. You will act as the Subject Matter Expert while coordinating closely with Operations, Maintenance, and Technical...Suggested
$97k - $147k
Electrical Engineer JOB SUMMARY The Electrical Engineer, as part of the Equipment & Reliability Engineering... ..., is responsible for specification, design, and maintenance of electrical... ...installations, UPS and substation battery systems). Principal Responsibilities Provide technical...SuggestedWork experience placement- ...Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA... ...Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier... ...support critical ship system processes, design, and development for naval and...For contractorsFor subcontractor
$20 - $25 per hour
...dynamic showroom environment? Classic Rock Fabrication is seeking a Design Center & Receiving Associate to support both our warehouse... ...documentation (e.g., packing slips) for accurate entry into the computer system. Complete daily receiving entries in the computer system....Hourly payFull timeWork at officeShift work- Adjunct Faculty Positions in All Areas of Electrical and/or Computer Engineering Adjunct Faculty Positions in All... ...Core topics Digital and embedded systems Computer architecture Circuits, electronics, power electronics VLSI design, chip design, advanced chip manufacturing...Part timeVisa sponsorship
$155k - $180k
...its subsidiary companies are designing an unfailingly safe and... ...turnkey supplier of equipment and systems for nuclear, solar,... ...across multiple disciplines (Electrical, Civil, Mechanical, Nuclear,... ...comprised of other designers, engineers, adjuncts, and project staff...$115k - $130k
...Senior Electrical Engineer As a Senior Electrical Engineer, you will be responsible for the design, development, and integration of complex aircraft arresting systems and architecture across hardware and software domains. The Senior Electronics Engineer will have...Work experience placement$83k - $132.5k
...provides an inclusive, engaging environment designed to empower employees and promote work-... .... The successful candidate will use Pro Engineer and/or Creo to design and document all... ...Operates interactive computer graphic systems as required. Qualifications: College...For subcontractorWork at officeLocal areaRelocation- A leading home improvement retailer in New Jersey is seeking Kitchen Designers to assist customers in creating their dream kitchens. The role involves engaging with customers, providing expert advice, and guiding them through the design process. The ideal candidates should...
$73.9k - $84.98k
Instructional Designer (PSS2), Rowan Online Job no: 501508 Work type: Regular Full-Time Location: Glassboro, New Jersey Categories: Professional... ..., and enhance online courses using the Learning Management System and integrated technologies. Apply instructional design...Full timeWork at officeLocal areaRemote workWork visaMonday to FridayFlexible hours- ...Job Description Job Description Electrical Power Generation Engineer Highly respected Consulting Firm... ...power generation and distribution design ~ Electrical engineering degree with... ..., Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater,...
- ...Job Description Job Description NDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other... ...Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience...For contractorsFor subcontractorWork at office
$80.75k - $109.25k
...Entry-Level Guidance, Navigation & Control Engineer to join the Flying Qualities and Autonomy... ..., PA . We participate in all phases of design and testing, and support all of Boeing’s... ...response, gust or disturbance rejection, system failure robustness, and loads considerations...Permanent employmentLive inImmediate startRelocationRelocation packageFlexible hoursShift workDay shift- Liberty Personnel Services, Inc. is seeking an Electrical Distributive Controls Engineer in Haddonfield, New Jersey. The ideal candidate will have over... ...license. Key responsibilities include working with control systems around compressors, pumps, and generators, with desired...
$101.7k - $167.68k
Instrument/Analyzer Engineer Job Summary Primary responsibilities are... ..., safety instrumented systems (SIS), programmable logic controllers... ...will have Process, Controls, Electrical, Mechanical acumen to lead... ...disciplines to improve or correct designs, installations, and increase...For contractorsWork experience placement- Guidance, Navigation & Control Engineer (Lead or Senior) Flying Qualities and Autonomy Technology... ...metrics. Drive flight control law design, applying control theory to achieve desired... ...response, gust/disturbance rejection, system failure robustness, and load considerations...Work experience placement
- Position Guidance, Navigation & Control Engineer (Associate/Mid-Level) - Boeing Defense, Space... ...specifications. Apply control theory to design control laws that achieve desired dynamic... ...response, gust or disturbance rejection, system failure robustness, and load...Work experience placementInterim roleFlexible hoursWeekend work
$97k - $147k
PBF Energy is seeking an Electrical Engineer to join their Equipment & Reliability Engineering Department at their Paulsboro facility. This role entails the specification, design, and maintenance of electrical equipment crucial for plant operations while ensuring reliability...$120k - $140k
...International and its subsidiary companies are designing a safe and secure source of clean energy... ...turnkey supplier of equipment and systems for the nuclear, solar, geothermal, and... ...experience in design or other relevant types of engineering such as systems startup, field...Work experience placement$69k - $101k
Eaton Corporation is seeking a Field Service Representative to join its team. This remote role involves working on electrical equipment projects and delivering technical solutions to customers, with expected travel up to 25%. Candidates should have at least 2 years in...Remote job- Micro1 is seeking a LibreSprite Expert to apply expertise in training next-generation AI systems. Your contributions will influence how AI models learn and perform through high-quality inputs. No AI experience needed; domain knowledge is paramount. You will manage pixel...Remote job
- Classic Rock Fabrication in Mantua Township is seeking a Design Center & Receiving Associate. This full-time role involves receiving and verifying materials, maintaining inventory cleanliness, and supporting warehouse operations. The ideal candidate should have a high...Full time
$94k - $116k
...Lead Electrical Engineer (Converting) Job Description You’re not the person who will settle... ...Engineers at Kimberly-Clark initiate, design, develop, optimize and problem solve manufacturing... ...Experience with manufacturing control systems, such as: PLCs (Programmable Logic...Full timeTemporary workWork at officeLocal areaRelocationFlexible hours- Job Description Job Title: Engineer (Mechanical/Electrical/Computer) Location: Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider... .... Develop and present fully automated advanced fluid system models using...For contractorsFor subcontractor
- Overview As a Sr. Electronics Engineer at Nielsen-Kellerman Co. ("NK"), you are a multi-skilled... ..., to collaborating with product designers and software engineers to drive full-stack... ...“internet of things” solutions, the Sr. Electrical Engineer will be a critical member of cross...Casual workWork at officeRemote workWork from homeHome officeMonday to FridayFlexible hours
$50k - $55k
...POSITION OVERVIEW: The Junior Graphic Designer supports all marketing efforts through the design of forward thinking, creative graphic elements that maintain the Philadelphia 76ers as a world-class brand across both traditional and interactive mediums. The mediums include...Summer workWork at officeFlexible hoursNight shift$66.4k - $95.5k
...Graphic Designer Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific...Full timeInternship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Automation System Designer (Electrical Engineering). Be the first to apply!


