HVAC Tech/Mechanic
Ansible Government Solutions
Overview
Ansible Government Solutions, LLC (Ansible) is currently recruiting HVAC Tech/Mechanics to support the North Texas VA Medical Center located at 4500 S. Lancaster Rd, Dallas, TX 75216. Shift schedule will typically be Monday-Friday, 8:00am-4:30pm. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers.
Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own.
Responsibilities
- Install, operate, repair, and maintain refrigeration, air conditioning, heating, ventilation, and chilled water systems.
- Work on equipment ranging from small domestic units to systems up to 300 HP and central plants up to 500 tons.
- Inspect HVAC and refrigeration equipment for proper operation.
- Perform preventive maintenance and both major and minor repairs.
- Troubleshoot refrigerant leaks, mechanical failures, and control systems.
- Service compressors and HVAC components.
- Adjust, calibrate, and repair mechanical, electrical, and pneumatic controls.
- Perform chemical treatment of HVAC water systems.
- Coordinate daily work assignments with the VA COR.
- Provide daily reports including completed work, preventive maintenance, parts replaced, equipment serviced, and follow-up needs.
- Complete daily timecards and documentation of work performed.
- Follow VA check-in/check-out procedures and safety requirements.
Qualifications
- Minimum 4 years of journeyman-level refrigeration and air conditioning mechanic
- Experience with HVAC, refrigeration, heating, ventilation, and chilled water systems.
- Experience performing repairs, troubleshooting, and maintenance on large commercial HVAC systems.
- Experience in hospital or critical infrastructure environments preferred
- Active Texas HVAC License required.
- Siemens Controls Training certification required.
- OSHA Certification required.
- Ability to read and interpret:
- Blueprints
- Mechanical drawings
- Wiring diagrams
- Schematics
- No sponsorship available
All candidates must be able to:
- Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift
- Lift up to 50 lbs from floor to waist
- Lift up to 20 lbs
- Carry up to 40 lbs a reasonable distance
- Push/pull with 30 lbs of force
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
- Ansible Government Solutions, LLC seeks an HVAC Tech/Mechanic to support the North Texas VA Medical Center in Dallas, TX. Typical schedule is Monday-Friday, 8:00am-4:30pm, with schedule changes at the direction of Ansible or its customers. You will install, operate, repair...SuggestedMonday to Friday
- .... Monday through Friday Description: The offeror must demonstrate the ability to provide qualified journeyman-level A/C Equipment Mechanics with the required skills, certifications, training, and experience to perform all duties defined in the Statement of Work. Demonstrated...SuggestedFor contractorsMonday to FridayShift work
$24 - $45 per hour
...facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: HVAC Mechanic Location - Syracuse, NY The Essential Duties and Responsibilities are intended to present a descriptive list of the range of...SuggestedContract workFor subcontractor$43.05 per hour
...HVAC MechanicJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing...SuggestedHourly payApprenticeshipWork experience placementLocal area$43.05 per hour
...HVAC Mechanic We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and/or mechanical equipment service industry). Mechanics must have practical work experience in light commercial or commercial...SuggestedHourly payApprenticeshipWork experience placementLocal area- HVAC Mechanic (932957) Job Description - HVAC Mechanic (932957) Join our team and help launch the first state psychiatric hospital in Dallas-Fort Worth, where innovative caregivers will make a lasting impact on behavioral health in Texas. The Texas Behavioral Health Center...Full timeFor contractorsImmediate startShift work
- Ansible Government Solutions, LLC is recruiting HVAC Tech/Mechanics to support the North Texas VA Medical Center in Dallas, TX. Typical shift is Monday-Friday, 8:00am-4:30pm, with schedule changes possible at the direction of Ansible or its customers. Qualifications include...Monday to FridayShift work
- HVAC Mechanic II (7:30 AM - 4:00 PM, Monday - Friday) Texas Behavioral Health Center - Dallas, Texas. This role supports mechanical work installing, maintaining, and repairing heating, cooling, and steam equipment across university buildings. Job Summary Works under minimal...Full timeFor contractorsMonday to FridayShift work
$42 - $48 per hour
...Job Description Job Description NOW HIRING: HVAC A/C Equipment Mechanic — 10 Openings North Texas VA Medical Center | Dallas, TX Location: 4500 S. Lancaster Rd, Dallas, TX 75216 Schedule: Monday–Friday, 8:00 AM – 4:30 PM (day shift only — no nights, no weekends...Long term contractContract workImmediate startMonday to FridayDay shift- UT Southwestern Medical Center is hiring an HVAC Mechanic II for their Dallas location. This role involves skilled installation, maintenance, and repair of HVAC systems across university buildings with a focus on ensuring the cooling and heating needs are met. The ideal...
- ...Job Description Job Description Proman Skilled Trades is looking for experienced HVAC Sheet metal Mechanics in the DFW area. You will be responsible for installing, repairing, and replacing various types and sizes of ductwork (Sheet Metal and/or Fiberglass) utilizing...
$120k - $180k
Dallas, TexasAircraft Operations Division - Customer Operations /Full Time Employee /On-siteShield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy...Full timeTemporary workPart timeWorldwide$32 per hour
Trillium Construction is seeking a Millwright / Maintenance Tech near Garland, TX. Millwright will need to be mechanically inclined and have experience with pumps, motors, gearboxes as well as some piping and welding experience. Pay: $32 Schedule: Mon - Fri, 40h / week...- ...fast-growing, stable company at the center of the booming data center industry—powering the infrastructure behind AI and the future of tech. Our team is shaping what’s next, with real impact and room to grow. We move fast, work smart, and make sure our people are...Work at officeLocal areaNight shiftWeekend work
- ...Job Description Job Description Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software, V-BAT and X-BAT aircraft, and Aechelon simulation...Full timeTemporary workPart timeWorldwide
$41.94k - $66.29k
TTM Technologies Inc.TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards. TTM stands for time...Flexible hoursShift work$32 per hour
Trillium Construction is looking for a Millwright / Maintenance Tech near Garland, TX. The successful candidate must be mechanically inclined, with experience in pumps, motors, gearboxes, piping, and welding. The role offers a pay rate of $32 per hour with a schedule of...Hourly payMonday to Friday$41.94k - $66.29k
Overview TTM Technologies, Inc. is a global manufacturer of technology products, including printed circuit boards and related assemblies, offering design, engineering and manufacturing services to shorten time-to-market for customers. This position is located at 6457 Fly...Flexible hoursShift work$25 per hour
...Join Nex tech Do you want to jumpstart your next career move with a sign-on bonus and... ...members and growing, we are the largest HVAC/R service provider in the United States and... ...HVAC/R systems, including electrical, mechanical, and electronic components Perform maintenance...Seasonal workWork at officeRelocation packageWeekend work$32.5 per hour
...handling equipment Perform preventive and predictive maintenance Read blueprints and electrical schematics Support electrical, mechanical, and pneumatic systems Manage work orders and maintenance activity through CMMS Track downtime, maintenance records, and...Weekly payContract workTemporary workApprenticeshipWork at officeShift work$44 per hour
...Commercial HVAC TechnicianImmediate Opening for light Commercial HVAC Tech. This is a mid career experienced HVAC position for commercial service work. Perfect for a team player who can work individually in the field or on a team, looking to grow and advance. Come Join...Full timeTemporary workLocal area- ...Creation, Test Plan Creation, FT Software Development, FT Diagnostic and Firmware Development, FT Fixture Development, FT Fixture Mechanical Design, FT Equipment Skills, FT Debug/integration of SW/HW, RF Test Development (),20Ghz), High Energy Experience, Electrical -...Work at officeLocal area
- Union Technologies in Dallas is looking for a Mechanical Engineering Technician to enhance production efficiency in defense manufacturing. The candidate will utilize advanced tools and methodologies to support mechanical assembly and maintenance efforts. Key responsibilities...
$35 - $45 per hour
...Job Description Job Description Industrial Pump Mechanic / Rotating Equipment Technician Rotaserv, LP | Rowlett, TX $35–$45/hour... ...food processing facilities, universities, hospitals, commercial HVAC systems, and high-rise buildings. Our work keeps essential infrastructure...$64.7k - $135.7k
## HVAC/Generator Systems TechnicianDallas, TX, USApply NowFind out how well you match... ...entry level to mid-level HVAC/Generator tech to its technical team in the Dallas, TX area... ...Systems (UPS), control panels, HVAC, mechanical and electrical systems such as timers, circuit...Contract workWork experience placementWork at officeFlexible hours- ...Diesel Mechanic (Service Tech II)If you'd like the chance to make your mark with the world's largest equipment rental provider, come build your future with United Rentals!As a Diesel Mechanic (Service Tech II), you'll use your skills to perform maintenance, preventive...Hourly pay
- ALL ROADS LEAD TO THIS OPPORTUNITY The journey to Valvoline Instant Oil Change (VIOC) is different for everyone. Our employees are students, recent grads, parents, part-time workers, veterans, career changers-who have all found their way to our team. No matter where...Hourly payWeekly payPart timeWeekend work
- All Roads Lead To This OpportunityThe journey to Valvoline Instant Oil Change (VIOC) is different for everyone. Our employees are students, recent grads, parents, veterans, career changers—who have all found their way to our team. No matter where you've been or what you...Hourly payWeekly payPart timeWeekend work
- JOB FUNCTIONS AND KEY RESPONSIBILITIES:Technical Engineer of the Instrumentation, Controls, and Automation portion of larger projects.Coordinate I&C activities of projects with the Technical Services Team.Develop/review power distribution 1-lines, SIS/PCS/ESD control systems...Contract workFor contractorsFlexible hoursShift workWeekend work
- ...Job Description Job Description Job Title: HVAC Mechanical Engineer Location: 3728 Arapaho Rd Addison, TX 75001 Engagement: Fulltime- Direct Hire About AIIR: AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to HVAC Tech/Mechanic. Be the first to apply!
- hvac installers Dallas, TX
- lead hvac technician Dallas, TX
- hvac technician training Dallas, TX
- experienced hvac installer Dallas, TX
- transport refrigeration technician Dallas, TX
- hvac r technician Dallas, TX
- air conditioning technician Dallas, TX
- commercial hvac service technician Dallas, TX
- refrigeration technician Dallas, TX
- hvac technician Dallas, TX



