Plumber II

Plumber II

Location: Hamburg, NY, US, 14075 Company: REV Group, Inc. Work Hours: Mon-Thu 5a-3:30p, 30 min lunch Additional Locations: Requisition ID: 26698

E-ONE manufactures custom and commercial fire trucks including pumpers and tankers, aerial ladders and platforms, rescues of all sizes, quick attack units, industrial trucks, and ARFF (aircraft rescue firefighting vehicles). Established in 1974, E-ONE has grown to become an industry leader in just a few decades, and today employs more than 1,000 people who manufacture over 400 fire trucks per year. Innovation has been the company's driving force and continues to be the impetus behind its pursuit of innovative technologies. The result is state-of-the-art fire rescue vehicles recognized for superior firefighting and rescue capabilities. E-ONE is part of Terex Corporation, a global designer and manufacturer of specialized vehicles and equipment, including fire and emergency vehicles, waste and recycling equipment, RV's, and machinery supporting construction, utilities, and infrastructure. With operations across the U.S. and globally, we are committed to safety, innovation, and quality while building products our customers depend on every day.

Available schedules: Monday - Thursday from 5:00 AM - 3:30 PM, plus Optional Overtime on Friday and Saturday or Monday - Thursday from 6:00 am - 4:30 pm, plus Optional Overtime on Friday and Saturday

SCOPE: Perform duties to diagnose, rebuild and install any range of pumping and associated piping systems as part of the process of rebuilding large, custom, special purpose vehicles of any description, where work is unusual and difficult and only general methods are available. Electrical: Must have the experience, knowledge and ability to run diagnostics, programming and make repairs to electrical systems on ALL E-ONE vehicles. Mechanical: Must be able to detect and make necessary repairs to parts and components of the vehicle when required.

ESSENTIAL FUNCTIONS: Work from shop orders, manuals, prints and instructions. Review shop orders to determine requirements. Disassemble pumps and valves, diagnose problems, determine extent of repairs, parts and materials required and rebuild and repair any range of pumps and valves to suit vehicle requirements. Install new and rebuild existing valves, foam systems, gauges, control lines, hand controls and similar components. Plumb to existing control panel or layout new panels to accommodate controls and systems in any range of company or competitor vehicle, where positioning, mounting and installation procedures differ based vehicle and component configurations and available space. Test pumps and related systems to check for leaks and proper operation. Make required repairs and adjustments. Able to do a pump performance tests and all foam testing on trucks. Make any required visual checks of component placement, alignment and security. Complete any required documentation. Monitor the availability of assembly parts and supplies stored in work area and notify supervisor of the need to replenish stock. Responsible for setting up and checking the work of others, assisting and instructing them and directing and maintaining the flow of their work. Able to help/assist service and warranty with field problems and willing to go into the field if need be. Retrofit or modify product to meet engineering and/or customer changes. Set up prescribed tests to check the operation of electrical components, including lights, sirens, radios, and warning systems. Diagnose problems, locate source of trouble, rewire or replace units as required. Be able to trace wires, examine connections, and replace wiring and/or connectors. Test operation and reassemble repaired units. Set up, change over, and operate the complete range of equipment and machine tools in the assigned area. This may include CNC equipment and machines. Capable of performing scrubs of print packages, BOM's, and shop orders; correct discrepancies. Be a technical advisor to the supervisor and assist with planning of daily activities and accomplishing weekly/daily commitments. EVT qualification and AC Certification required. CDL not required however appreciated. Assist the supervisor in the training and orientation of new and transferred team members into the department. Must be able to perform within physical requirements including, but not limited to 40 lb single person lift; kneeling, squatting and standing for long periods of time. Ability to wear fall protection devices as needed when working at heights above 4 feet. Must be able to participate in LEAN and continuous improvement activities.

OTHER DUTIES MAY INCLUDE, BUT ARE NOT LIMITED TO: Perform or assist with any operations, as required or directed, to maintain work flow or respond to production requirements.

TOOLS AND EQUIPMENT USED: Air and power driven tools including but not limited to: hand drills, drill press, impact gun, grinders, die grinders, cut off wheels, DA sanders, dynafiles, wrenches, air guns, heat guns, stud welders, electrical test stand, volt meter, amp meter, computer, engine/transmission data reader, and overhead crane; fork truck training and operation required. Valid Driver's License required to drive company vehicles.

POSITION EXPECTATIONS : SAFETY : Follow E-ONE General Health & Safety Rules, ensure safe operating conditions within area of responsibility, and notify coworkers and supervisors of hazardous acts and conditions. Proper use of PPE; use only defect-free equipment. Promote safety in department. Use proper lifting techniques and overhead hoist when needed. Maintain clean and safe working environment in line with 5-S Philosophy. Participate in hazardous communication training and safety meetings. QUALITY : Responsible for the quality of work. This requires defect-free work and understanding of the requirements of the company's quality system as it pertains to job duties and responsibilities. Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards. Identify and segregate non- conforming product. Identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate. FLEXIBILITY : Able and willing to work in other areas as needed. Must be flexible in taking lunch and breaks when workflow requires. Willing and able to meet overtime requirements as necessary. INITIATIVE : Actively participate in continuous improvement of products and processes to better serve customers and improve the overall profitability of E-ONE. Actively seek out work in other areas when current assignment is complete. Make suggestions for improving product quality, processes, safety, and company profitability. TEAMWORK : Positive working attitude toward other employees; be a team player. Work with others constructively and abide by company policies and procedures. Working together as a team for continuous improvement is vital to ensure the future of E-ONE and its employees. Teamwork will be required to be effective in daily production assignments as well as special improvement projects. CAREER DEVELOPMENT : Attend and participate in a variety of meetings, training programs, and task force groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specific level of knowledge pertaining to changes to equipment or process, new developments, requirements, procedures, and policies. LEADERSHIP: Lead the team, provide innovative thought leadership on strategies to grow market share, increase profitability, and meet long-term business goals. ACTION-ORIENTED: Enjoy working hard; is action-oriented and energetic; not fearful of acting with a minimum of planning; seize more opportunities than others. CONFLICT MANAGEMENT: Step up to conflicts, seeing them as opportunities; read situations quickly; good at focused listening; can hammer out tough agreements and settle disputes equitably; can find common ground and get cooperation. DEALING WITH AMBIGUITY: Can effectively cope with change; can shift gears comfortably; can decide and act without having the total picture; isn't upset when things are up in the air; doesn't have to finish things before moving on; can comfortably handle risk and uncertainty. DRIVE FOR RESULTS: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results.

MINIMUM REQUIREMENTS: High school graduate or General Education Diploma. Math and blueprint reading skills Must be able to read tape measure Computer and E-ONE Operating systems Attention to detail Strong work ethic Commitment to E-ONE quality standards Good problem solving skills Be a team player

PHYSICAL REQUIREMENTS: Lift/Push/Pull- Exerting up to 40 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. Climbing- Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Stooping- Bending body downward and forward by bending spine at the waist. Kneeling- Bending legs at knee to come to a rest on knee or knees. Crouching/Crawling/Reaching - Bending the body downward and forward by bending leg and spine. Moving about on hands and knees or hands and feet. Extending hand(s) and arm(s) in any direction. Standing- Particularly for sustained periods of time. Walking- Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. The worker is required to have visual acuity to perform an activity such as: operating machines such as lathes, drill presses, power saws and mills where the seeing job is at or within arm's reach; performing mechanical tasks of a non-repetitive nature such as carpenters, technicians,