CNC Operator 1st Shift

$19 - $30 per hour

Kimco Staffing

Job Description

CNC Operator (1st Shift)
Location: Long Beach, CA (On-site)
Schedule: Mon–Fri, 6:00 AM–3:00 PM
Pay: $19–$30/hr DOE
Industry: Aerospace Manufacturing

Job Summary
Operate CNC milling centers to support aerospace production while maintaining quality and safety standards.

Responsibilities

Run 3-axis and 5-axis CNC mills; monitor cycles for continuous operation
Load/unload materials and finished parts; maintain production flow
Verify setup accuracy using travelers/work instructions
Measure parts and tool assemblies using calipers/micrometers ; replace tools as needed
Perform basic inspections, deburr/edge break, and support AS9100 quality requirements
Move materials/workholding using forklift and overhead crane (as needed)
Maintain 6S/clean work area; log production in ERP
Support basic machine upkeep (coolant, filters, chip bins) and continuous improvement

Qualifications

Entry-level to junior CNC experience preferred
Aerospace manufacturing exposure a plus
Comfortable reading travelers/work instructions and using hand measuring tools
Forklift/overhead crane experience preferred (or willing to train)
Detail-oriented and team-focused

Physical Requirements

Stand for extended periods; lift up to 25 lbs
Comfortable in a manufacturing environment

Export Compliance (ITAR)
This position requires access to export-controlled technical data subject to U.S. export control laws (including ITAR).PandoLogic. Keywords: CNC Operator, Location: Garden Grove, CA - 92840 , PL: 604378167

Apply

Vacancy posted 2 days ago

Similar jobs that could be interesting for youBased on the CNC Operator 1st Shift in Garden Grove, CA vacancy

CNC Machine Operator
...Schedule: ~ Monday – Friday ~4:00 PM – 2:30 AM ~ Training: 1 week on 1st Shift (6:30 AM – 4:30 PM) ~ Job Term: Temp to Hire Position Summary: The CNC Lathe Machinist is responsible for operating, programming, and troubleshooting CNC lathes to produce high-...
Day shift
Temporary work
Monday to Friday
Fairway Staffing Solutions
Garden Grove, CA
15 days ago
CNC Machine Operator
...CNC Lathe MachinistSchedule:Monday – Friday4:00 PM – 2:30 AMTraining: 1 week on 1st Shift (6:30 AM – 4:30 PM)Job Term: Temp to HirePosition Summary:The CNC Lathe Machinist is responsible for operating, programming, and troubleshooting CNC lathes to produce high-precision...
Day shift
Temporary work
Fairway Staffing Solutions
Garden Grove, CA
17 hours ago
CNC Operator
$25 - $28 per hour
...industries has an immediate full‑time opening for an experienced CNC Machinist. This on‑site role offers long‑term stability and the opportunity to support a growing production environment. Hours: 1st shift Days: Monday-Friday Job Requirements: Read and interpret...
Day shift
Hourly pay
Full time
Local area
Immediate start
Monday to Friday
Flexible hours
Jobot
Anaheim, CA
2 days ago
Cnc Machine Operator
$20 - $26 per hour
...CNC Machine Operator Garden Grove, CA Pay: $20-$26 per hour Schedule: 1st/2nd Shifts About the Role We are seeking a skilled CNC Machine Operator to set up, operate, and maintain CNC machinery within a manufacturing environment. The primary focus of...
Day shift
Hourly pay
Contract work
Local area
Afternoon shift
Partners Personnel Management
Garden Grove, CA
1 day ago
CNC Machinist
$30 - $42 per hour
...Description Overview We're hiring CNC Machinists for our aerospace... ..., additional overtime, night shift differential Compensation... ...including overtime) Hiring on 1st and 2nd Shift ~ Monday -... ...sheets Machining: Set up and operate CNC milling and turning centers...
Day shift
Permanent employment
Monday to Friday
Night shift
Afternoon shift
Laborup
Anaheim, CA
18 days ago
Entry-Level CNC Machine Operator, Precision Components
$20 per hour
...Job Description Job Description Entry-Level CNC Machine Operator, Precision Components Work Hours: Full-Time Shifts: 1st & 2nd Shift Pay Rate: $ to $20.00 Assignment Length: Sep 21, 2026 to Sep 21, 2027 (366 Days) (12 months) Is this you? Ready to...
Day shift
Full time
Apprenticeship
Shift work
Afternoon shift
Chipton-Ross
Buena Park, CA
11 days ago
CNC Set-up Operator
$27 - $35 per hour
...Oriented. Focused. Mechanically Inclined. Our California division, located in Huntington Beach , is hiring a CNC Set-up Operator for 1st shift (6:30am - 3:00pm). Family-owned for over 75 years, Precision Resource is a leading global supplier of precision...
Day shift
Permanent employment
Flexible hours
Precision Resource
Huntington Beach, CA
22 days ago
CNC Set Up Machinist
$28 - $34 per hour
...CNC Set-Up Machinist ~$28 - $34 HR ~1st Shift ~ Machines: HAAS, Ellison/Doosan, Matsuura ~ Set-Up and Operate 3-5 Axis ~ Milling experience ~ Lathe experience is optional ~1st article inspection ~ Blueprint Reading ~ Vertical/Horizontal ~ Tight...
Day shift
Relocation
Key Skilled Personnel
Santa Ana, CA
2 days ago
CNC Lathe Machinist - 1st Shift
$26 per hour
...Job Title: CNC Lathe Machinist Location: Garden Grove, CA Shift: Day Shift, (Monday - Friday) 8:00am - 4:30pm Pay Range: $26.00 per hour starting... ...manuals and other work instructions. Set up - operate machine(s) and load with correct cutting tools....
Day shift
Hourly pay
Monday to Friday
Shift work
Key Skilled Personnel
Garden Grove, CA
2 days ago
CNC Lathe Machinist - 1st Shift
...following all rules and required language. CNC Lathe Machinist Karman Space &... ...systems engineered to perform in demanding operational environments. Our tip-to-tail... ...Schedule •This position follows a 1st shift schedule: Monday–Friday, 6:00 a.m.– 4:45...
Day shift
Permanent employment
Temporary work
For contractors
Apprenticeship
Monday to Friday
Flexible hours
Karman Space & Defense
Santa Ana, CA
4 days ago
CNC Machinist - D Shift (10-hour Shifts: Thursday - Sunday)
$24 - $28 per hour
...ESSENTIAL FUNCTIONS OF THE JOB: Sets up and operates manual and CNC machines under supervision. Reads... ...any machine abnormalities to the shift team leader or supervisor. Maintains... ...supervisors. Ensures continuity between 1st and 2nd shifts through verbal or documented...
Day shift
Hourly pay
Permanent employment
Work at office
Local area
Shift work
Afternoon shift
Roller Bearing Company of America, Inc
Santa Ana, CA
18 days ago
CNC Operator 2nd Shift
...CNC OperatorTraining Schedule: Will train on 1st shift for approximately 1–2 months to become familiar with our equipment, processes, quality requirements,... ...00pm Training 6:00am-2:30pmPay: $20 an hourThe CNC Operator is responsible for setting up and operating CNC machines...
Day shift
Afternoon shift
Pexco
Yorba Linda, CA
4 days ago
CNC Machinist (Fanuc) - 1st Shift, On-site Benefits
...Jobot is seeking an experienced CNC Machinist in Fountain Valley, CA for a direct-hire, on-site role. You will set up and operate CNC mills and lathes with Fanuc controls, read blueprints, adjust tooling, and conduct in-process and final inspections to ensure parts meet...
Day shift
Jobleads-US
Fountain Valley, CA
1 day ago
CNC Programmer
...CNC ProgrammerPosition: Mastercam Programmer CNC Milling 5 Axis and Tool DesignJoin... ...growing production environment. Hours: 1st shift Days: Monday-Friday or Monday-Thursday 4... ...machining processes across multi-axis milling operations.Assist with equipment setup and initial...
Day shift
Full time
Immediate start
Monday to Friday
Jobot
Anaheim, CA
1 day ago
CNC Operator 2nd Shift
$20 per hour
...CNC Operator Training Schedule: Will train on 1st shift for approximately 1–2 months to become familiar with our equipment, processes, quality requirements, and team. Upon successful completion of training, the position will transition to the 2nd shift schedule....
Day shift
Immediate start
Afternoon shift
Pexco
Yorba Linda, CA
4 days ago
CNC Machinist
$35 - $45 per hour
...CNC machinist l Aerospace Machine Shop Experience! This Jobot Job is hosted by: Julibeth... ...growing production environment. Hours: 1st shift Days: Monday-Friday Job Requirements:... ...machining processes across multi‑axis milling operations. Assist with equipment setup and initial...
Day shift
Hourly pay
Full time
Local area
Immediate start
Monday to Friday
Jobot
Stanton, CA
2 days ago
CNC Operator I
...CNC Operator IHuntington Beach, CA 92649Job Function: Manufacturing Job Number: 418232Job DescriptionPay Rate: $20-$24/hr 1st shift- Monday through Friday 6:00 am - 2:30 pmSUMMARY: The CNC Operator I must be able to set-up and operate computer programmed machines. Along...
Day shift
Weekly pay
Temporary work
Immediate start
Monday to Friday
JSG (Johnson Service Group, Inc.)
Huntington Beach, CA
1 day ago
CNC Machinist
...A bit about us: CNC machinist l Aerospace + Machine Shop Experience! Why join... ...production environment. Hours: 1st shift Days: Monday-Friday Job Requirements... ...machining processes across multi-axis milling operations. Assist with equipment setup and...
Day shift
Full time
Local area
Immediate start
Monday to Friday
Jobot
Stanton, CA
2 days ago
CNC Setup Operator - 1st Shift, Growth & Benefits
Precision Resource, Inc. located in Huntington Beach, CA, is hiring a CNC Set-up Operator for 1st shift (6:30am - 3:00pm). The candidate will set up, adjust, and operate CNC mills, perform preventative maintenance, and support a skilled team in a family-owned environment...
Day shift
Precision Resource, Inc.
Huntington Beach, CA
4 days ago
Cnc Lathe Machinist
$20 - $35 per hour
...CNC Lathe Machinist Job Description This role is ideal for an experienced CNC... ...standards. The position offers both 1st shift (6:00 a.m.2:30 p.m., MondayFriday) and 2nd... ...effectively. Collaborate with machine operators and programmers to ensure a smooth and efficient...
Day shift
Weekly pay
Contract work
Temporary work
Shift work
Afternoon shift
Aerotek
Anaheim, CA
2 days ago
CNC Mill-Turn Machinist
...an IMMEDIATE opening for an experienced CNC Mill-Turn Machinist. With over 50 years in... ...organized individual with the ability to operate in a fast moving environment. The... ...Performs other duties as assigned. The 1st shift operates Monday through Friday, from 5:00...
Day shift
Temporary work
Local area
Immediate start
Monday to Friday
Monday to Thursday
Afternoon shift
Absolute Technologies
Anaheim, CA
5 days ago
CNC Machinist - 3-5 Axis Milling (Aerospace), On-Site
Jobot in Stanton, CA is seeking an experienced CNC Machinist for a full-time, on-site role supporting precision manufacturing in aerospace... ...in a regulated environment. This position offers stable hours (1st shift, Monday-Friday) and a comprehensive benefits package. Candidates...
Day shift
Full time
Monday to Friday
Jobot
Stanton, CA
1 day ago
Press Brake Operator
...Innovations, Inc. is seeking to hire a Press Brake Operator with the below criteria:... ...Job Requirements: Experience operating CNC Press brake Experience with press break... ...to lift 50 lbs. This position is for 1st shift from 8am-5pm Monday-Friday. Please submit...
Day shift
Full time
Part time
Relocation
Monday to Friday
Shift work
Laser Innovations Inc
Anaheim, CA
12 days ago
CNC Lathe Operator
$22 - $30 per hour
...CNC Lathe OperatorDependable. Enthusiastic. Driven to succeed. Bring your manufacturing skills to a role that has direct... ...division, located in Huntington Beach, seeks a CNC Lathe Operators on the 1st and 2nd Shifts. Summary The CNC Lathe Operator is responsible for...
Day shift
Permanent employment
Flexible hours
Afternoon shift
Precision Resource
Huntington Beach, CA
2 days ago
CNC Machine Operator
Accurate Technology is seeking CNC Machine Operators for both day and night shifts to run production on our Haas and Mori Seiki vertical and horizontal mills. You’ll be responsible for loading/unloading parts, performing in-process checks, and supporting consistent, high...
Day shift
Hourly pay
Full time
Shift work
Night shift
Gledhill/Lyons, Inc.
Anaheim, CA
1 day ago
CNC Machinist- 5 axis
$35 - $45 per hour
...immediate full‑time opening for an experienced CNC Machinist. This on‑site role offers long... ...growing production environment. Hours: 1st shift Days: Monday-Friday Job Requirements... ...processes across multi‑axis milling operations. Assist with equipment setup and...
Day shift
Hourly pay
Full time
Immediate start
Monday to Friday
Leoforce
Anaheim, CA
3 days ago
Punch Press Stamp Operator
$22 per hour
...Job Description Job Description A punch press operator Stamp operator sets up, operates, and maintains industrial machines that... ...dimensions, and monitoring machine performance to ensure parts meet precise production standards. 1st shift 6:30am-3:00pm $22 per hour...
Day shift
Hourly pay
PayCruit, LLC
Santa Ana, CA
18 days ago
CNC Knife Operator
...Job Description Job Description SUMMARY The CNC Knife operator (Gerber Machine) personnel will help with reading and understanding detailed instructions on how to operate machines, look at interpret drawings and set up. ESSENTIAL DUTIES AND RESPONSIBILITIES...
Monday to Friday
Sonfarrel Aerospace
Anaheim, CA
5 days ago
CNC Machinist set up/Operator
...Job Description Job Description CNC MACHINIST (3 and 5-Axis Mill) Aerofab Corporation... .... Position: CNC Machinist (Setup and Operator) Description: The CNC Machinist is... ...of all skills above.Extra pay for Swing Shift...! \nCompany Description Aerospace...
Afternoon shift
AEROFAB CORPORATION
Anaheim, CA
19 days ago
CNC Machine Operator
$20 - $25 per hour
...Job Title: CNC Lathe & Mill Machine Operator Location: Santa Ana, CA Pay Rate: $20.00-$25.00 per hour Shift: M-F: 8am - 4:30pm can work 6:00am - 2:30pm Manufacturing company seeking experienced CNC Machine Operators to operate CNC lathes and mills. Candidates...
Hourly pay
Shift work
Key Skilled Personnel
Santa Ana, CA
2 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Operator 1st Shift. Be the first to apply!