Medium Voltage Electrician

Medium Voltage Electrician

Tradesmen International is immediately hiring experienced Medium Voltage Electricians for projects located in or around South Haven, MS. This is a first shift opportunity, and the pay rate is $40-$48/hour for an Apprentice and $50-$60/hour for a Journeyman based on experience plus $160/day per diem for Travelers 60+ miles from the job site. If you are an Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career!

Job Scope:

• Travel with internal construction and electrical teams to project sites to install, terminate, and test medium-voltage systems, including e-house medium-voltage switchgear (MVSG), generator step-up transformers (GSUs), 15 kV and 35 kV cable, duct bank, and associated control wiring
• Pull, rack, land, and terminate 15 kV and 35 kV cable using manufacturer-approved stress cones and terminations
• Install medium-voltage duct bank, manholes, and raceway for 12.47 kV, 13.8 kV, and 34.5 kV circuits.
• Support hipot/VLF and insulation-resistance testing of new medium-voltage cable and gear: prepare, isolate, ground, and stand the work with commissioning
• Work adjacent to live campus medium-voltage buses under switching orders, clearances, and LOTO.
• Read and interpret medium-voltage one-lines, physical drawings, cable schedules, and termination drawings; produce as-builts and test records
• Ensure compliance with NEC, NFPA 70E, OSHA 1910.269, and SpaceXAI safety and quality standards, including switching, clearance, LOTO, and arc-flash protocols
• Collaborate with contractors, engineers, and operations teams to deliver projects on time with zero incidents.
• Participate in constructability reviews and provide field feedback to improve designs
• Mobilize quickly between project locations as construction phases and priorities shift

Requirements:

• 5+ years of hands-on electrical construction at 5 kV and above in industrial, data center, utility, or generation environments. Experience at 480 V does not meet this requirement
• Documented 15 kV and/or 35 kV terminations (termination logs, QC packages, or manufacturer terminator qualification cards)
• Experience installing or landing medium-voltage switchgear, transformers/GSUs, and medium-voltage cable at 12.47 kV, 13.8 kV, and/or 34.5 kV
• Ability to read medium-voltage one-lines, cable schedules, and termination drawings.
• Working knowledge of NFPA 70E, lockout/tagout (LOTO), medium-voltage switching and clearance, and OSHA 1910.269
• Ability to lift 50+ lbs, climb ladders, and work in e-houses, duct banks, and industrial environments with PPE.
• Hourly position with overtime; willingness to work nights, weekends, and extended shifts during construction and energization
• Ability and willingness to travel 80% or more on a construction rotation; per diem and/or housing provided while on site

Physical Requirements:

• Schedule varies depending on site operational needs; frequent overtime and weekend support is required
• Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions, climbing, lifting up to 50 lbs., and working on ladders/lifts at elevated heights
• Ability to work in an environment requiring exposure to fumes, odors, noise, heat, cold, and rain
• Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment
• Stand: up to 6 hours per day
• Sit: up to 3 hours per day
• Push/Pull: up to 75 lbs. (unassisted) 12 hours per day
• Overhead reach: up to 3 hours per day
• Walk: up to 3 hours per day
• Lift/Carry: up to 50 lbs. (unassisted) 12 hours per day

Preferred Qualifications:

• Manufacturer terminator qualification cards for 15 kV and/or 35 kV
• State journeyman electrician license, or lineman/substation qualification, with the ability to work in Tennessee and Mississippi
• Data center or industrial campus medium-voltage construction experience, including e-house MVSG, duct bank, and work adjacent to live 15/35 kV buses
• Switching and clearance experience on 15 kV or 35 kV systems under OSHA 1910.269
• OSHA 30 or equivalent construction safety training in addition to NFPA 70E and OSHA 1910.269

Multiple Jobsite Locations Available:

• South Haven, MS
• Memphis, TN

Be Safe from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other "up front" costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request.