Welder
Crane Co.
Position Summary: This is a 2nd shift positions Monday-Friday 4:30pm to 3:00am, training will be completed on day shift. The welding technician in this position is responsible for all Gas Tungsten Arc Welding applications required to meet customer demand within Conroe facility. Must be able demonstrate exceptional weld quality for thin wall stainless tube in all positions as well as understanding of dimensional drawings, preparation of components, fitment and joining per internal procedures for internal and customer approved designs. Operation of automated welding equipment as well as training of other employees of automated processes will be required.
Principle Responsibilities: • Prepare and visually inspect all components, understand dimensions and design requirements prior to welding for compliance to work order specifications.
• Assemble fabricated designs prior to final welding to the correct components as called by the work order and tube/weld pipe complete in accordance with the manufacturing procedures.
• Fittings and special products may be assembled and tack welded using manual and/or automated welding techniques.
• Fittings and special products are welded completely in accordance with current ASME BPVC weld procedures and customer supplied specifications.
• Welding units are maintained, calibrated and set-up to comply with welding procedures taking into consideration other factors including correct filler wire, compressed gas, and appropriate pressure settings to weld in accordance to the internal procedures and ASME welding procedures.
• Use 2D dimensional reading skills to interpret engineering or customer supplied drawings and specifications.
• Use ability to read measuring instruments not limited to, but including tape measure, rulers, calipers, micrometers.
• Verify protective shielding and restricted area signs are in place before welding. Andon lights to be used while welding is in process.
• Ability to set up and safely operate the plasma-arc cutting torch in accordance with the manufacturing procedures.
• Perform material handling functions inside of weld cell applicable to consumable parts, fittings, tubing and other components.
• Understand, promote and work to meet OSHA and Crane safety practices
QUALIFICATIONS/EXPERIENCE: • Must have minimal high school education.
• Should have currently or previously maintained an ASME Section IX certification in GTAW for 316L stainless or be able to demonstrate ability to pass certification during interview weld examination.
• Must have ability to ASME certify and weld to 1G-6G position on ½ inch - 6-inch pipe.
• Must have the ability to support development of WPS & WPQR procedures as required in this department.
• Should have three or more years' experience with GTAW welding stainless steel and or completed equivalent technical school training.
• Fabrication experience and the ability to work from dimensional drawings, sketches are required.
• Five or more years' welding experience in a manufacturing environment.
• Horizontal manual lathe and or manual machining experience are a plus.
• Simple computer skills required (Excel, Word), ability to translate and communicate professionally and through email necessary.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job:
• Required to stand for long periods of time
• Required to have good balance
• Required to use hands to handle or feel objects, tools or controls
• Required to reach with hands and arms, balance, stoop, kneel, or crouch
• Must be able to lift and/or move up to 25 pounds.
• Specific vision abilities required by the job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Ability to use various hand tools
• Must have good hand and eye coordination
WORK ENVIRONMENT: Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is not exposed to weather conditions. The noise level in the work environment is usually moderate. It will be the responsibility of all employees to perform their work productively and within established production standards. All employees are required to work safely so as not to endanger themselves or others. Safety rules must be adhered to at all times.
Management reserves the right to reassign employees to other positions or duties either temporarily or permanently based on production levels or other manufacturing concerns. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by a person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. EOE/Women/Minorities/Veterans/Disabled This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.
Principle Responsibilities: • Prepare and visually inspect all components, understand dimensions and design requirements prior to welding for compliance to work order specifications.
• Assemble fabricated designs prior to final welding to the correct components as called by the work order and tube/weld pipe complete in accordance with the manufacturing procedures.
• Fittings and special products may be assembled and tack welded using manual and/or automated welding techniques.
• Fittings and special products are welded completely in accordance with current ASME BPVC weld procedures and customer supplied specifications.
• Welding units are maintained, calibrated and set-up to comply with welding procedures taking into consideration other factors including correct filler wire, compressed gas, and appropriate pressure settings to weld in accordance to the internal procedures and ASME welding procedures.
• Use 2D dimensional reading skills to interpret engineering or customer supplied drawings and specifications.
• Use ability to read measuring instruments not limited to, but including tape measure, rulers, calipers, micrometers.
• Verify protective shielding and restricted area signs are in place before welding. Andon lights to be used while welding is in process.
• Ability to set up and safely operate the plasma-arc cutting torch in accordance with the manufacturing procedures.
• Perform material handling functions inside of weld cell applicable to consumable parts, fittings, tubing and other components.
• Understand, promote and work to meet OSHA and Crane safety practices
QUALIFICATIONS/EXPERIENCE: • Must have minimal high school education.
• Should have currently or previously maintained an ASME Section IX certification in GTAW for 316L stainless or be able to demonstrate ability to pass certification during interview weld examination.
• Must have ability to ASME certify and weld to 1G-6G position on ½ inch - 6-inch pipe.
• Must have the ability to support development of WPS & WPQR procedures as required in this department.
• Should have three or more years' experience with GTAW welding stainless steel and or completed equivalent technical school training.
• Fabrication experience and the ability to work from dimensional drawings, sketches are required.
• Five or more years' welding experience in a manufacturing environment.
• Horizontal manual lathe and or manual machining experience are a plus.
• Simple computer skills required (Excel, Word), ability to translate and communicate professionally and through email necessary.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job:
• Required to stand for long periods of time
• Required to have good balance
• Required to use hands to handle or feel objects, tools or controls
• Required to reach with hands and arms, balance, stoop, kneel, or crouch
• Must be able to lift and/or move up to 25 pounds.
• Specific vision abilities required by the job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Ability to use various hand tools
• Must have good hand and eye coordination
WORK ENVIRONMENT: Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is not exposed to weather conditions. The noise level in the work environment is usually moderate. It will be the responsibility of all employees to perform their work productively and within established production standards. All employees are required to work safely so as not to endanger themselves or others. Safety rules must be adhered to at all times.
Management reserves the right to reassign employees to other positions or duties either temporarily or permanently based on production levels or other manufacturing concerns. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by a person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. EOE/Women/Minorities/Veterans/Disabled This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Welder in Montgomery, TX vacancy
- Welding TechnicianThe welding technician in this position is responsible for all Gas Tungsten Arc Welding applications required to meet customer demand within Conroe facility. Must be able demonstrate exceptional weld quality for thin wall stainless tube in all positions...Suggested
- ...TIG WelderLocation: Montgomery, TXReports To: Bulk Tank SupervisorJob Summary: A TIG Welder job involves using Tungsten Inert Gas (TIG) equipment to precisely join various metals (steel, aluminum, stainless) by interpreting blueprints, preparing materials, operating machinery...SuggestedLocal area
- ...businesses optimize operations, enhance efficiency, and drive performance in highly technical process industries.Job Summary:A MIG Welder in a cryogenic manufacturing company is responsible for the high-precision joining of metals, such as stainless steel and aluminum,...SuggestedLocal area
- Position Summary: This is a 2nd shift position Monday-Friday 4:30pm to 3:00am, this position will train on day shift. This role is responsible for pre-fabrication tasks comprised of cutting, drilling, coping, and rolling operations of piping/tubing/flex/spiral...SuggestedMonday to FridayFlexible hoursDay shiftAfternoon shift
- Job Description Job Description Position Open: Carbon Dioxide (CO2) Tank Repair Shop Technician Location: Montgomery, TX Reports To: Bulk Tank Supervisor Company Overview: CTR Cryo is a leading provider of industrial gas products and services, helping customers...SuggestedLocal area
- ...all other duties as assigned by supervisorQualifications/Experience:Ability to perform maintenance on industrial machinery such as welders, lathes, pumps, etc.Ability to wire 120V, and 240V 3-Phase electrical systemsAbility to read a wiring diagramAbility to braze copper...
$12 - $15 per hour
Job Description Job Description Lead Technician Trainee Manage all assigned jobs from start to completion. This position needs to be able to provide All Dry level customer service including but not limited to: going over the job scope with home owner, explaining...Hourly payTraineeship- ESSENTIAL DUTIES AND RESPONSIBILITIES: A Maintenance Technician I performs a variety of intermediate skilled duties including the operation of water sewer and storm drainpipe maintenance and construction. Assists the Crew Leader with providing basic assessments of...
- General Maintenance Technician This position will work 4 evenings/nights a week, Wed - Sat, similar to 5:30pm - 10:30pm Job Overview: The General Maintenance Technician reports to the Director of Maintenance and is responsible for the overall general maintenance...Night shiftAfternoon shift
$55 per hour
Automotive Technician / Mechanic We are looking for Technicians / Mechanics who are energetic, upbeat, and have a positive attitude. The Technicians / Mechanics we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right...Hourly pay- Job Description Job Description Description: We are seeking a highly motivated and skilled Service Technician to join our propane business. The ideal candidate will be responsible for the installation, maintenance, repair, and servicing of propane systems and equipment...Part timeLocal area
- Amazon needs you as a Package Sorter to help their mission of making customers' lives easier. If you are looking for a signing bonus, outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, Amazon Warehouse jobs have...Full timePart timeSeasonal workRelocation packageFlexible hoursShift work
$35k - $65k
Job Description Job Description Swimming Pool Maintenance Technician Richard’s Total Backyard Solutions Full-Time | Monday–Friday Peak Season Earning Potential: $35,000–$65,000 Must be 21 years or older. About Richard’s Total Backyard Solutions Richard...Full timeSummer workSeasonal workMonday to Friday- Company Info Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste...Full timeLocal areaMonday to FridayFlexible hoursShift workNight shift
- Summary of Duties: Under the direct supervision of a Groundskeeper Supervisor or Foreman, the Groundskeeper performs skilled and semi-skilled work to maintain and enhance the beauty, safety, and functionality of Walden on Lake Conroe's community grounds. This includes...Night shift
$13 - $15 per hour
Golf GreenskeeperMontgomery, TexasLocation: Montgomery, TXFLSA: Non-ExemptStatus: Part TimeReports to: Golf Course Maintenance Super AttendantPay Range: $13- 15/HRJob Summary: The Greenskeeper is responsible for the daily maintenance and care of the golf course grounds...Shift workDay shift- Greenskeeper Opportunity At Grand Lake Golf ClubGrand Lake Golf Club, located in Montgomery, TX, is pleased to announce an excellent career opportunity for a Full-Time Greenskeeper. We are seeking a driven individual who is eager to learn, contribute, and grow within a...Full timeSummer work
$55 per hour
Job Description Job Description Company Description Christian Brothers Automotive Benefits: ~*Up to $55/HR For The Most Skilled Technicians ~ Paid Vacation & Paid Holidays ~ Closed Every Weekend To Spend Time With Family & Friends ~ Real-Time Technical...Hourly payFull timeRelocation packageWeekend work$26.47 - $43.62 per hour
The Postal Service is the largest government-related agency, employing nearly 1 million people, and is currently hiring nationwide with many positions available. Job Description Clerk – Clerks sell stamps, take incoming mail, and sort and distribute mail in addition...Hourly payFull timeCurrently hiringWork at office$26.47 - $43.62 per hour
Postal Mail Handler – Job Overview and Description The Postal Service is the largest government-related agency employing nearly 1 million people and is currently hiring nationwide, there are MANY positions available! The job openings range in starting salary from ...Hourly payFull timeCurrently hiringImmediate startFlexible hours$23 per hour
Nex Tech HVAC/R Technician Opportunity Do you want to jumpstart your next career move with a sign-on bonus and the ability to earn seasonal bonuses on top of your success? Are you ready to join a company that leads the industry and invests in you from day one? Welcome...Seasonal workRelocation packageWeekend work$26 - $29 per hour
Job Summary The Maintenance II Technician is responsible for performing facility and equipment maintenance repairs and preventive maintenance tasks at the site level. This is a mid-level maintenance position that works under the guidance of the Maintenance III Technician...Hourly payWeekly payDaily paidFull timeTemporary workLocal areaFlexible hoursAfternoon shift$20.84 - $26.97 per hour
At STERIS we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Position Summary As a Quality Technician you will be responsible to for assisting in administration...Temporary workPart timeFor contractorsLocal areaShift workDay shift- Note : This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market. Looking to start a rewarding career path in the healthcare industry? Use Dreambound...Flexible hours
- NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, ...Full time
- Job Description Job Description Are you looking to grow? So are we! Jordan Chevallier Farmers Insurance in Montgomery, Texas, is looking for an enthusiastic, customer-driven, and knowledgeable person to join our team as a Full-Time Sales Representative . In this...Full timeFlexible hours
$23.47 - $38.62 per hour
Role Overview USPS is accepting applications for Assistant Rural Carriers nationwide. In this role, you deliver and collect packages along designated suburban and rural routes, often using your personal vehicle. The position primarily involves working on weekends and...Hourly payWeekend work- POSTAL MAIL PROCESSOR NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is...Full time
$26 - $34 per hour
Job Summary: Under the supervision of the Plant Manager the Technician will process gas orders in a safe and efficient manner for timely delivery to our customers. The Technician will work effectively in a team environment with a minimum of supervision maintaining...Full timeTemporary work$18 per hour
About Us: Liberty Tire Recycling is a high-growth company and the premier provider of tire recycling services in North America with operations throughout the United States and Canada. Liberty Tire annually transforms more than 210 million tires into raw materials for...Full timeLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!






