Welder
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
- You will pass on instructions to members of the work group.
- You will check and report work progress of the group.
- You will perform work site inspections.
- You will receive job or work assignments from welding supervisor.
- You will check and report work progress of the group including written documentation and shift assist requests.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This may be a bargaining unit position.
- You may be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.
- A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
- You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
- This position may require exposure to high noise levels.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the Welder in Everett, WA vacancy
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- Job TitleJob DescriptionDutiesYou will be identifying and associating metals, alloys and filler metal by color code and standard markings.You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.You will be using test methods...Suggested
- Job Description Job Description Must be willing to travel/temporarily relocate to Portland, OR. Why Skilled Trades Professionals Choose AAA USA: ~ Competitive Pay. ~ Overtime Opportunities. ~ Long-Term Assignments. ~ Multiple U.S. Locations. ~ Relocation...SuggestedRelocationRelocation package
- ...opportunities, and desire an opportunity to apply their skills in our progressive environment. We are now seeking a **Structural Welder **who will weld structural portions of marine vessels together and perform wire feed and stick welding operations to support...SuggestedOdd jobApprenticeship
$28.8 - $43.2 per hour
Job TitleThe M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join...SuggestedRelocation- Job TitleJob DescriptionDutiesYou will pass on instructions to members of the work group.You will check and report work progress of the group.You will perform work site inspections.You will receive job or work assignments from welding supervisor.You will check and report...Shift work
- ...arrange for proper and safe work operations for assignments.You will analyze trade requirements through the use of audits, surveillance, and/or incident reports.You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel....
- ...specifications, standards, plans and schedules.You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.You will serve as an Expert Welder leading a group to ensure work assignments are completed....
$22 - $30 per hour
...Snohomish County. OSW and has been in business for over 20 years and has branches in Edmonton, Canada and Tempe, Arizona. As a Welder II on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and...Bi-weekly payHourly payFull timeApprenticeshipImmediate startWorldwideFlexible hours- Job TitleThe job title is not provided in the raw HTML.Job DescriptionYou will plan work schedules of subordinates and establish priorities on the basis of general work schedules methods and instructions from higher levels of supervision.You will make recommendations concerning...
- Expert PipefitterYou will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam...
$23 - $30 per hour
Job Title: Production Fabricator II Location: Marysville, WA Zip Code: 98270 Start Date: Right Away Job Type: Contract; 6+ Months Pay Rate: $23 to $30/hour. Keywords: #ProductionFabricatorjobs; #Marysvillejobs; We provide a competitive pay and benefits package. This...Permanent employmentContract workLocal areaImmediate startShift work$23.32 per hour
Boeing Pre-Employment Training (BPET) Students - Interiors Fabricator and Assembler Mech C - 20503 Company: The Boeing Company Boeing Commercial Airplanes is excited to offer students and recent graduates of certified Boeing Pre-Employment Training (BPET) programs the...Hourly payPermanent employmentLive inImmediate startRelocationVisa sponsorshipWork visaRelocation packageFlexible hoursShift work- Belcan Corporation in Marysville, WA is seeking a Production Fabricator II for a six-month contract. You will perform general fabrication of aircraft interior details and sub-assemblies to support production objectives. Responsibilities include fabricating components to...Contract work
- The Boeing Company is seeking an Interiors Fabricator and Assembler for the Fabrication team in Everett, Washington. The role focuses on fabricating and assembling aircraft interior panels and assemblies, following established processes and safety standards. Candidates ...
- The Boeing Company is seeking an Interiors Fabricator and Assembler Mech C for the Everett site, open to BPET graduates. The role focuses on fabricating and assembling aircraft interior panels and components using established processes while adhering to strict safety and...
- The Fabrication Assembler (FA) Level 1-3 is responsible for building custom, finished aircraft component parts based on unique, customer-specific design requirements. This is not typical assembly line work—the environment emphasizes low repetition & high customization, ...Local area
- Greenpoint Technologies in Marysville, WA, is seeking a skilled fabrication technician to produce aircraft interior details and sub-assemblies, supporting production to meet project objectives. This temporary role is staffed through an agency. The candidate will read complex...Contract workTemporary work
- Greenpoint Technologies in Marysville, WA seeks a temporary Fabrication Technician to support production of aircraft interior details and sub-assemblies. You will fabricate components to drawings, operate fabrication machines, and assist in assembling complex structures...Contract workTemporary work
- The Boeing Company in Everett, WA is seeking an Interiors Fabricator and Assembler to join our fabrication team. You will fabricate and assemble aircraft interior panels and assemblies, working with adhesives, resins, honeycomb core, carpet fiberglass, and aluminum, while...
$33 - $38 per hour
Job Description Job Description Swing Shift Be part of a team that works Mon - Thurs 3 pm to 11:30 pm and Fri 10 am to 6:30 pm. Our Maintenance Department team is responsible for the following: * Ongoing Maintenance & Repair of All Machinery, Equipment and ...Hourly payFull timeRelocationMonday to FridayShift workAfternoon shift$26 - $32 per hour
Sheet Metal Construction Workers Pay: $26 to $32 per hour Location: Everett, WA Shift Times: ~1st Shift: 6:00 AM - 4:30 PM, Monday - Thursday ~2nd Shift: 4:00 PM - 2:30 PM, Monday - Thursday ~ Weekend Shift: 5:00 AM - 5:30 PM, Friday - Sunday Job ...Hourly payWeekly payFull timeContract workTemporary workShift workWeekend workDay shiftAfternoon shift- A children's coaching center in Everett is looking for passionate KidStrong Coaches to engage with children aged 12 months to 11 years. You'll lead classes that focus on the brain, physical, and character development while also communicating with parents about the curriculum...Flexible hours
- Job TitleGeneral Maintenance / FacilitiesLocationEverett, WA, 98201, United StatesCompensation$45,760.00 - $83,200.00 / Year$2000 Sign-On Bonus!IndustryeCommerce / RetailerEducationHigh schoolExperienceMinimum 2 YearsJob DescriptionGeneral Maintenance / FacilitiesRelocation package
$22 per hour
Job Description Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work...Hourly payFull timeTemporary workPart timeLocal area- Repair And Tool TechnicianRepair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians...
- Kettle Cuisine is seeking a Maintenance Mechanic to ensure efficient operation and safe maintenance of all production equipment at the Everett, WA facility. You will support plant equipment, conveyors, and production lines, perform preventative tasks, and maintain records...
- BUILD YOUR CAREER WITH TUFF SHED! We're recruiting for a Field Construction Technician - DOT to be part of our team providing high-quality Tuff Shed products. The essential functions of this position include, but are not limited to: Warranty, Service, & Delivery...Full timeLocal areaFlexible hours
- DutiesHelpYou will pass on instructions received from supervisors and get work started.You will work with other workers and set the pace.You will ensure plans, blueprints, materials, and tools are available, and needed stock is obtained from supply locations.You will maintain...
$30 per hour
Service TechnicianFounded in 1956, the Jacuzzi® Brand has grown to become the modern-day Jacuzzi Group, the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business ...Full timeImmediate startWork from homeMonday to FridayNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!


