Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Repair and Tool Technician

$21 per hour

The Home Depot

Job Description

Position Purpose:

Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $21.00

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Repair and Tool Technician in Derby, CT vacancy
  •  ...machine offsets to ensure a quality product Sets-up & operate mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings etc. Maintains specifications and best in class quality by observing drilling, grooving, and... 
    Suggested
    Shift work

    StaffWorks Inc

    Seymour, CT
    2 days ago
  •  ...established cycle times and quality standards.ResponsibilitiesSet up, operate, and adjust CNC lathes and mills with no supervisionChange tooling and make machine adjustments to hold tolerancesLoad/unload parts and run production cyclesRead blueprints, job orders, and GD&T... 
    Suggested

    gpac

    Shelton, CT
    1 day ago
  • $800 per month

     ...Description Job Description PEP BOYS / Mavis Tire - Automotive Tire Technicians Start Strong with Pep Boys & Mavis: Eligible Automotive...  ...Technicians to join Team Mavis at our automotive service, repair, and tire sales centers in the Orange, CT area . NO... 
    Suggested
    Hourly pay
    Weekly pay
    Full time
    Immediate start

    Mavis Tire Supply

    Orange, CT
    5 days ago
  •  ...Lathe OperatorOur client is a full service company specializing in thermoforming tool design & manufacturing of high-performance, dedicated mold and trim assemblies to exact customer specifications. The operator ensures that lathe machines run safely and efficiently to... 
    Suggested

    StaffWorks Inc

    Seymour, CT
    3 days ago
  • $30 - $42 per hour

     ...interpreting technical blueprints Setting up and operating CNC millers or lathesmachines Choosing and loading the correct cutting tools for the material being machined. Troubleshooting issues during the manufacturing process. Completing quality control tests... 
    Suggested
    Permanent employment
    Full time
    Flexible hours
    Shift work
    Afternoon shift

    TekPro Engineering

    Seymour, CT
    4 days ago
  • $41.6k - $83.2k

     ...Math and Calculation Tending Setting Basic Computer Skills Blueprint Reading CNC Lasers Welding Spot Welding Tool Changes CNC Mills CNC Lathes Diagrams Engineering Drawings Programming Fanuc Controls G, D and T G and M... 
    Permanent employment
    Temporary work
    Work experience placement
    Immediate start
    Monday to Friday
    Monday to Thursday
    Shift work
    Night shift
    Weekend work
    Day shift
    Afternoon shift

    Randstad

    Monroe, CT
    13 days ago
  •  ...Proficiency operating a Hardinge T-41, Hardinge Quest 51, Hardinge Quest 8-51 or similar machinery.  A comprehensive knowledge with Live Tooling and Fanuc Controls is essential.  Blue print comprehension and inspection equipment knowledge is essential.   Salary negotiable,... 

    JURMAN METRICS INC

    Monroe, CT
    a month ago
  •  .... Key Responsibilities Set up and operate CNC Vertical Turning Lathes (VTLs) . Perform complete machine setups including tooling, fixtures, workholding, and offsets. Load and verify existing CNC programs. Read and interpret blueprints, GD&T, specifications... 
    Full time

    Complete Staffing Solutions

    North Haven, CT
    10 days ago
  • $18 - $35 per hour

     ...run large production lots of aerospace components that span weeks or even months. You will ensure consistent part quality, monitor tool wear, and collaborate with your teammates to meet strict delivery deadlines. Core Responsibilities Tend CNC machine tools to... 
    Hourly pay
    Full time
    Shift work
    Day shift

    MCMELLON BROS INC

    Stratford, CT
    8 days ago
  • $32 - $40 per hour

     ...manufacturing company is seeking an experienced Senior CNC Set Up Technician – Mill or Lathe to join its team in Milford, CT. This is a...  ...G-code, read complex blueprints, troubleshoot machining and tooling issues, and verify that finished parts meet tight dimensional... 
    Monday to Friday
    Shift work
    Day shift

    THE HIRING METHOD

    Milford, CT
    20 days ago
  •  ...completed properly CNC Conventional Machining Motion is controlled along multiple axes, normally at least two (X and Y), and a tool spindle that moves in the Z (depth). The position of the tool is driven by motors through a series of step-down gears, in order to... 
    Full time
    Temporary work
    Part time

    Express Employment Professionals

    Monroe, CT
    1 day ago
  •  ...Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians NTB is proud to join the Mavis Tire Family. We're looking...  ...Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Ellicott City, MD area. With... 
    Weekly pay
    Full time
    Immediate start

    Mavis Tire Supply

    Milford, CT
    12 days ago
  • $23 - $28 per hour

     ...Generate and maintain CNC programs for all items in specific product lines Inspect product produced using many different measuring tools including micrometers, calipers, indicators, visual plates, etc. Familiar with tight tolerances up to.0001 inch Document... 
    Permanent employment
    Full time
    Temporary work
    Local area

    Express Employment Professionals Defunct

    Milford, CT
    4 days ago
  • $30 - $38 per hour

     ...experience Responsibilities: Set up and operate CNC lathes / CNC turning equipment Perform machine setups, tooling changes and offsets Read and interpret blueprints, drawings and specifications Machine precision components to required... 
    Hourly pay
    Full time
    Work at office
    Local area

    Express Employment Professionals Defunct

    Milford, CT
    1 day ago
  • CNC Mill Machinist Ready to elevate your machining career with an industry leader? Since 1947, we have crafted precision aerospace and defense components for global customers. We're seeking a CNC Mill Machinist to set up and optimize cutting-edge equipment. Enjoy top...

    Randstad

    Milford, CT
    2 days ago
  • $35 - $41 per hour

     ...Interpret blueprints, drawings, and specifications to ensure high-quality output Inspect completed parts with gauges and measuring tools to verify compliance with all dimensions and tolerances Support workflow efficiency and contribute to process improvements... 
    Full time
    Day shift

    New Day Executive Search

    Milford, CT
    2 days ago
  •  ...Must be proficient in diagnosing, troubleshooting and making corrections and adjustments to CNC lathe equipment, including life tooling. Ability to make insert changes and adjust properly to bring part to size. Must also be familiar with various types of gauging... 
    Afternoon shift

    RBC Bearings

    Oxford, CT
    4 days ago
  •  ...environment, apply today.Your responsibilities:Program setup: accurately set up CNC machines by loading programs, installing and aligning fixtures, and setting tool offsets (length, diameter) for production runs.Tooling management: select and install correct cutting tools.
    Immediate start
    Flexible hours

    Randstad

    Milford, CT
    3 days ago
  •  ...producing precision components for the Aerospace, Defense, and Medical industries.ResponsibilitiesAs a CNC Milling Machine Set Up Technician, you will be responsible for setting up and operating CNC milling machines to produce precision components.Reporting to the shop... 
    Day shift

    Synectics

    Milford, CT
    3 days ago
  •  ...Reading: Follow numbered Inspection Method Sheet (IMS) blueprints and engineering drawings.Adjustments & Maintenance: Change out basic tools (inserts, drills), perform tool touch-offs, and make basic offset adjustments with direction from senior operators.Documentation:... 
    Permanent employment
    Full time
    Temporary work

    Hamilton Connection

    North Haven, CT
    3 days ago
  • $32 - $40 per hour

     ...manufacturing company is seeking an experienced CNC Lathe Set Up Technician to join its team in Milford, CT.This is a hands-on setup...  ...and make G-code edits and adjustments as requiredSet up jobs, tooling, and machines for precision component productionWork with Fanuc... 
    Monday to Friday
    Day shift

    The Hiring Method LLC

    Milford, CT
    4 days ago
  • Essex Industries has operations in Saint Louis, Missouri, Huntington Beach, California, and Milford, Connecticut, serving local, national and international customers, both military and commercial. The company supplies platform controls, aircraft components, liquid oxygen...
    Local area
    Flexible hours

    Essex Industries

    Milford, CT
    2 days ago
  • CNC Operator Night Shift OpportunityAre you a skilled set up CNC operator looking for new night shift opportunities? Do you have the ability to work with precise work specifications and measurements needed for quality inspections? We are in need of a 3rd shift Operator...
    Monday to Friday
    Monday to Thursday
    Night shift
    Day shift

    Randstad

    Monroe, CT
    1 day ago
  •  ...Experience operating Swiss-style CNC machines. Ability to read blueprints. Experience using calipers, pin gauges, and other measuring tools. Basic knowledge of GD&T. Basic math skills. Ability to lift up to 50 pounds. Eligible to work in the United States.... 
    Immediate start

    Revere Staffing Partners Corp.

    Naugatuck, CT
    1 day ago
  • $32 - $38 per hour

     ...for 40 Requirements ~ Machine Setups: Perform complete CNC milling setups for complex precision components. Tooling & Workholding: Set tooling, fixtures, workholding, offsets, and work coordinates. Blueprint Reading: Interpret engineering drawings... 
    Temporary work
    Shift work
    Weekend work
    Afternoon shift

    Laborup

    New Haven, CT
    2 days ago
  • $23.2 - $38 per hour

     ...Perform precision grinding operations to close tolerances and surface finish requirements Select and install grinding wheels, tooling, fixtures, and attachments Inspect finished parts using micrometers, dial indicators, bore gauges, optical comparators, and other... 
    Hourly pay
    Full time
    Shift work

    Coherent

    Monroe, CT
    12 hours ago
  • $35 - $41 per hour

     ...componentsInterpret blueprints, drawings, and specifications to ensure high-quality outputInspect completed parts with gauges and measuring tools to verify compliance with all dimensions and tolerancesSupport workflow efficiency and contribute to process improvementsCommunicate... 
    Day shift

    New Day Executive Search

    Milford, CT
    2 days ago
  • $30 - $40 per hour

     ...perform setups on 3-5-axis mills and/or 2-3-axis CNC lathes . Interpret complex blueprints, GD&T, and work instructions. Select tooling and establish work and tool offsets. Make machine-side G-code edits and offset corrections on Fanuc controls. Prove out... 
    Full time
    Shift work
    Weekend work
    Day shift

    Laborup

    Milford, CT
    3 days ago
  •  ...quality parts and finished products. This position performs layout, fitting, assembly, inspection, and finishing activities using hand tools, power tools, and measuring instruments while ensuring all work meets company quality standards and customer specifications. The... 
    Full time
    Part time
    For contractors
    Internship

    Lex Products

    Shelton, CT
    2 days ago
  •  ...assemble metal parts per blueprints and specifications. You will measure, fit, assemble, and inspect components using hand and power tools, ensuring quality and adherence to customer specifications. Applicants should have a high school diploma (or equivalent) and the... 

    Lex Products

    Shelton, CT
    5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!