Plastic Surgeon
Park Bridge Rehabilitation and Wellness Center
Summary
SUMMARY: The Plastic Surgeon will provide medical and surgical care for Alameda Health System. Services will be on-site at Highland Hospital, San Leandro Hospital and Alameda Hospital.
DUTIES & ESSENTIAL JOB FUNCTIONS: NOTE: Following are the duties performed by employees in this classification. However, employees may perform other related duties at an equivalent level. Not all duties listed are necessarily performed by each individual in the classification.
1. Perform medical and surgical care of the above problems: Breast cancer reconstruction, breast hypertrophy (macromastia, gynecomastia), transgender breast surgery. Decubitus ulcers and non-healing wounds. Flap and graft performance for other services. Hand-reconstruction - support Orthopedics with grafts and major flaps. Hidradenitis suppuritiva (shared with General Surgery). Keloids. Scar revision. Skin cancer - mostly on the face but throughout the body for larger defects. Soft tissue tumor excision, especially on the face but elsewhere for larger defects. Traumatic defects - from facial soft tissue avulsions to soft-tissue loss associated with lower extremity orthopedic trauma
Perform medical and surgical care of the above problems.
2. Direct and manage Plastic Surgery Clinic and execute the surgery generated from it.
3. Provide plastic surgery consultations to all services and perform appropriate surgery.
4. Direct and supervise general surgery and oral/maxillofacial residents, midlevel practitioners, and medical and PA students.
5. Provide 24/7 coverage for Plastic Surgery for emergency or inpatient consultation.
6. Fiscal Responsibility: work with the Chief of Surgery to minimize expenses and maximize revenue.
7. Assist the Chair of Surgery in the development and organization of policies and procedures.
MINIMUM QUALIFICATIONS:
Education : Doctor of Medicine (M.D.) or Doctor of Osteopathic Medicine (D.O.) degree is required.
Minimum Experience : Completion of approved post-graduate residency training in Plastic Surgery from an accredited hospital or medical center.
Required Licenses/Certifications : Board Certified or Eligible.
Required Licenses/Certifications : Possession of a valid license to practice medicine in the State of California.
Valid Drug Enforcement Agency (DEA) Number.
Pay Range: On Call 24hr $660.00 - Onsite Hourly $246.74
The pay range for this position reflects the base pay scale for the role at Alameda Health System. Final compensation will be determined based on several factors, including but not limited to a candidate's experience, education, skills, licensure, and certifications, departmental equity, applicable collective bargaining agreements, and the operational needs of the organization. Alameda Health System also offers eligible positions a generous, comprehensive benefits program.
SUMMARY: The Plastic Surgeon will provide medical and surgical care for Alameda Health System. Services will be on-site at Highland Hospital, San Leandro Hospital and Alameda Hospital.
DUTIES & ESSENTIAL JOB FUNCTIONS: NOTE: Following are the duties performed by employees in this classification. However, employees may perform other related duties at an equivalent level. Not all duties listed are necessarily performed by each individual in the classification.
1. Perform medical and surgical care of the above problems: Breast cancer reconstruction, breast hypertrophy (macromastia, gynecomastia), transgender breast surgery. Decubitus ulcers and non-healing wounds. Flap and graft performance for other services. Hand-reconstruction - support Orthopedics with grafts and major flaps. Hidradenitis suppuritiva (shared with General Surgery). Keloids. Scar revision. Skin cancer - mostly on the face but throughout the body for larger defects. Soft tissue tumor excision, especially on the face but elsewhere for larger defects. Traumatic defects - from facial soft tissue avulsions to soft-tissue loss associated with lower extremity orthopedic trauma
Perform medical and surgical care of the above problems.
2. Direct and manage Plastic Surgery Clinic and execute the surgery generated from it.
3. Provide plastic surgery consultations to all services and perform appropriate surgery.
4. Direct and supervise general surgery and oral/maxillofacial residents, midlevel practitioners, and medical and PA students.
5. Provide 24/7 coverage for Plastic Surgery for emergency or inpatient consultation.
6. Fiscal Responsibility: work with the Chief of Surgery to minimize expenses and maximize revenue.
7. Assist the Chair of Surgery in the development and organization of policies and procedures.
MINIMUM QUALIFICATIONS:
Education : Doctor of Medicine (M.D.) or Doctor of Osteopathic Medicine (D.O.) degree is required.
Minimum Experience : Completion of approved post-graduate residency training in Plastic Surgery from an accredited hospital or medical center.
Required Licenses/Certifications : Board Certified or Eligible.
Required Licenses/Certifications : Possession of a valid license to practice medicine in the State of California.
Valid Drug Enforcement Agency (DEA) Number.
Pay Range: On Call 24hr $660.00 - Onsite Hourly $246.74
The pay range for this position reflects the base pay scale for the role at Alameda Health System. Final compensation will be determined based on several factors, including but not limited to a candidate's experience, education, skills, licensure, and certifications, departmental equity, applicable collective bargaining agreements, and the operational needs of the organization. Alameda Health System also offers eligible positions a generous, comprehensive benefits program.
Vacancy posted 10 hours ago
Similar jobs that could be interesting for youBased on the Plastic Surgeon in Newark, CA vacancy
$250k
...Plastic Surgery Opening in with Kaiser Permanente Leading the future of health care Fremont/San Leandro, California We are seeking a BE/BC Plastic Surgeon to join our group of three physicians. Our practice offers a diverse and well-balanced mix of reconstructive...PlasticsFor contractorsFlexible hours- ...Job TitleThe occupation requires monitoring and operating CNC (computer numerically controlled) lathe machines to cut metal and plastic parts for the manufacturing industry.This includes monitoring tool life, adjusting tool offsets, periodic inspection of part & documentation...PlasticsImmediate startShift work
$19 - $20 per hour
...masking, and install dowel pins on repeat or proven parts with simple to high complexity on a various materials such as aluminum, steel, plastic and copper with direction from area Lead or Supervisor. Ability to communicate with production lead and supervisor Follow...Plastics- ...ability5+ years of experience designing mechanical components and systems from concept through production validation. Emphasis on Plastics design/manufacturing experience skillset.Strong working capability with CAD and CAE simulation (CATIA, Pro-Engineer, ANSYS, etc.)Able...Plastics
- ...protective equipment when required.Hands instruments and supplies to surgeon, holds retractors, cuts sutures, and performs other tasks as... ...:Experience with minimal access, general, ENT, eyes, plastics, orthopedics, vascular, spines, urology, GYN. Podiatry and maxiofacial...Plastics
- ...Hand Surgeon Contract PositionConcentra, one of the largest health care companies in the nation, is looking for a hand surgeon to come on site to our location as a 1099 independent contractor. This role is a contract position and is meant to compliment your current practice...Contract workFor contractorsLocal areaShift work
- ...process and fixturing.Must be familiar with cutting a wide variety of materials including various exotic alloys, aluminum, steel, and plastic.BenefitsHealth/Dental/Vision InsuranceLife insurance policySafe Harbor 401(K) plan401(K) matchPaid time off (vacation/sick/holidays...Plastics
- ...Interior Components and Systems and demonstrable track record of technical excellence and program execution • A solid knowledge of plastic parts design, structural performance, manufacturing technologies, craftsmanship, ergonomics, safety and homologation requirements...Plastics
- ...suitable for wearable products. Perform GD&T, tolerance analysis, stack-up analysis, and dimensional reviews . Work on plastic injection-molded, die-cast, CNC-machined, sheet-metal, and elastomer components . Collaborate with electrical, optical, RF,...Plastics
- ...Job Title The occupation requires monitoring and operating CNC (computer numerically controlled) lathe machines to cut metal and plastic parts for the manufacturing industry. This includes monitoring tool life, adjusting tool offsets, periodic inspection of part &...PlasticsImmediate startShift work
- ...conceptualization, designing, CAD modeling, development, and test/validation. Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings. Ensure documentation aligns with SEMI, standards, and industry best practices for geometric dimensioning...Plastics
- ...DFM, MoldFlow and tooling design approvals supporting injection trials for part appearance and functional validation Work with plastics engineering to improve designs for optimum layout of plastic assembling and paint lines Collaborate with cross-functional...PlasticsFull time
$130k - $145k
..., and ability to work with changing priorities.Experience in medical device manufacturing; or other broader manufacturing such as plastics, chemicals, or polymer environments.Proficient with math, statistics, and reading comprehension.Proficient with computer skills (Microsoft...PlasticsWork at office$250k
...Job Description Job Description Job Title: Plastic Surgeon Location: San Jose, CA Employment Type: Full-time or Part-time Salary: $250,000 – $500,000 per year for Full-time Plastic Surgeon Jobs in San Jose, CA: Your Wound Expertise, a Better Way to...PlasticsFull timePart timeFor contractorsWork at officeMonday to FridayAfternoon shift2 days per week3 days per weekWeekday work$20 - $23 per hour
...issues to leadership.Skills & QualificationsTool & Process Basics: Basic familiarity with standard hand tools and materials (metals, plastics, purchased hardware).Instruction Following: Ability to read, understand, and carry out detailed written and verbal instructions....PlasticsHourly payImmediate startShift work- ...p.m. We are hiring Carpenters / Custom Crate Builders to measure, cut, and assemble custom crates using wood, sheet metal, and plastic. This is a hands-on opportunity for someone who enjoys building and takes pride in accurate, quality work. Responsibilities:...PlasticsFull timeTemporary workMonday to FridayShift workDay shift
$125k - $270k
...conceptualization, designing, CAD modeling, development, and test/validation.Design components using variety of metals, ceramics, quartz, plastics, and advanced coatings.Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric...PlasticsLocal areaRemote workFlexible hours2 days per week3 days per week1 day per week$110k - $150k
...principles to drive continuous improvement. Design and develop packaging solutions utilizing wood, plywood, corrugated materials, plastics, foam, and mixed-material systems to protect products throughout the supply chain Create detailed packaging drawings,...Plastics$86k - $192k
...conceptualization, designing, CAD modeling, development, and test/validation.Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric...PlasticsLocal areaRemote workFlexible hours2 days per week3 days per week1 day per week$73.54 per hour
..., heaters, and temperature monitoring systems. Knowledge of material properties and manufacturing considerations for aluminum, plastics, ceramics, quartz, and other engineering materials. Experience performing Finite Element Analysis (FEA) , including structural...PlasticsFull timeContract workWorldwide$20 - $23 per hour
...experience is a plus. Deburr Technician Job Summary Seeking a detail-oriented Deburr Technician to smooth and finish metal and plastic parts using hand and power tools. Ideal for hands-on individuals who value precision and craftsmanship. Key Responsibilities...PlasticsWork at officeLocal areaShift workDay shiftAfternoon shift$125k - $270k
...external stakeholders in product engineering and design, manufacturing, field support, quality, and supplier engineering.Experience in plastics/soft material fabrication and new product introduction including mechanical engineering, roll-to-roll/tape material casting,...PlasticsLocal areaRemote workFlexible hours2 days per week3 days per week1 day per week$140k - $250k
...vacuum welding, heat treating, plating and anodizing. We can process many advanced materials, including aluminum, stainless steel, plastics, ferrous-nonferrous and other exotic alloys Job Purpose: This position is responsible for the General Business Operations of the...PlasticsPermanent employmentTemporary workFlexible hours$150 per hour
...global medical device partner providing design, development, manufacturing, and assembly services through capabilities in materials, plastics, metals, extrusion, and automation. With nearly 6,000 employees across 24 locations worldwide, it delivers high-quality, life-...PlasticsWorldwide$85k - $110k
...vacuum welding, heat treating, plating and anodizing. We can process many advanced materials, including aluminum, stainless steel, plastics, ferrous-nonferrous and other exotic alloys. Job Purpose The Material Planner is responsible for production planning and...PlasticsPermanent employmentContract workWork experience placementFlexible hours$38 - $48 per hour
...global medical device partner providing design, development, manufacturing, and assembly services through capabilities in materials, plastics, metals, extrusion, and automation. With nearly 6,000 employees across 24 locations worldwide, it delivers high quality, life...PlasticsFull timeApprenticeshipLocal areaWorldwideRelocation packageShift workDay shift$144k - $198k
...Creepage & Clearance principles Proven Design for Manufacturing (DFM) and Design for Assembly (DFA) experience across injection molded plastics, sheet metal, die castings, busbars, gaskets, adhesives, and PCBA-integrated assemblies. Experience with Root Cause Analysis...PlasticsHourly payContract workWork experience placement$131.5k - $180.84k
...CATIA or similar software Proven Design for Manufacturing (DFM) and Design for Assembly (DFA) experience across injection molded plastics, sheet metal, die castings, busbars, and adhesives. Experience with Root Cause Analysis methods, such as 8D Preferred: Experience...PlasticsHourly payWork experience placement$91.6k - $195.6k
...functioning as dynamic, robotic structural components. Typical commodities include seating structures, mechanisms, actuators, foam, trim, plastics, harnesses, controllers, PCBs, and sensors. In this role, you will engage in diverse engineering disciplines, including...PlasticsHourly payDaily paidFull timeTemporary workFlexible hours$85k - $120k
...vacuum welding, heat treating, plating and anodizing. We can process many advanced materials, including aluminum, stainless steel, plastics, ferrous-nonferrous and other exotic alloys. Summary CNC Programmer will combine computer skills with manufacturing...PlasticsPermanent employmentLocal areaRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Plastic Surgeon. Be the first to apply!



