Coating Technician - ROTATING SHIFT
Full-time
Coherent
Job Description
Job Description \n
\n
Shift: One week of 7am -3pm: Mon -Fri, then a week of 3pm - 11pm: Mon - Fri, and rotate that schedule every other week. \n
\n
Primary Duties & Responsibilities \n
\n
Operation of thin film coating and test equipment including: \n
\n
\n
- \n
- Retrieving proper designs according to set schedule and programs into coating system operations controller \n
\n
\n
- \n
- Operate coating equipment according to set parameter and establishing procedures \n
\n
\n
- \n
- Determine evaporation layer end points to high level of accuracy \n
\n
\n
- \n
- By observation and deduction, extract the maximum amount of data from each coating run and document accordingly \n
\n
\n
- \n
- Monitor two high volume coating chambers at one time, while supporting peers in their operations \n
\n
\n
- \n
- Communicate daily activities during quality meetings \n
\n
\n
- \n
- Operate characterization/test equipment and interpret results \n
\n
\n
- \n
- Maintain schedule demands and requirements \n
\n
Coating Chamber Setup \n
\n
\n
- \n
- Evaluate design requirements and prepare evaporation materials accordingly \n
\n
\n
- \n
- Evaluate evaporation components to assure proper operation requirements \n
\n
\n
- \n
- Change out all worn/dirty components and replace with cleaned or new ones \n
\n
\n
- \n
- Observe and extract the maximum amount of data from each calibration/production run. Evaluate data from calibration/production runs \n
\n
\n
- \n
- Use calibration equipment to assure proper setup and quality control \n
\n
\n
- \n
- Double check design and run requirements before loading run \n
\n
\n
- \n
- Document log information required for design operations \n
\n
\n
- \n
- Accept responsibility for the quality of the thin film coating process and equipment assigned \n
\n
Related Job Tasks \n
\n
\n
- \n
- Supporting cleaning area in loading of optical components \n
\n
\n
- \n
- Prepare evaporation material according to procedure \n
\n
\n
- \n
- Maintain inventory controls \n
\n
\n
- \n
- Perform minor maintenance with minimal support \n
\n
\n
- \n
- Take traces between coating runs to verify performance \n
\n
- \n
- Learn nonstandard system operations at a basic level \n
\n
\n
- \n
- Audit personal and peer procedures for process consistency \n
\n
\n
- \n
- Support senior operators in the training of new employees \n
\n
\n
- \n
- Provide engineering support with timely, accurate information \n
\n
\n
- \n
- Attend and participate in daily quality meetings \n
\n
Education & Experience \n
\n
\n
- \n
- High school graduate or equivalent \n
\n
\n
- \n
- Manufacturing experience preferred \n
\n
Skills \n
\n
\n
- \n
- Able to work in a demanding, fast-paced production environment \n
\n
\n
- \n
- Able to multi-task and prioritize \n
\n
\n
- \n
- Forward thinker \n
\n
\n
- \n
- Strong attention to detail and quality \n
\n
\n
- \n
- Team-oriented; works well with others in the group \n
\n
\n
- \n
- Excellent interpersonal skills \n
\n
\n
- \n
- Good communication, both verbal and nonverbal \n
\n
\n
- \n
- Must be able to effectively listen and assimilate, present organized trains of thought, assure a timely information exchange with others as required \n
\n
Working Conditions \n
\n
\n
- \n
- Must be able to work with acids, radioactive materials and other toxic chemicals \n
\n
\n
- \n
- Make-up and perfumes discouraged while working in clean room to prevent contamination \n
\n
Physical Requirements \n
\n
\n
- \n
- Long periods of standing and/or walking (3-4 hours at a time) \n
\n
\n
- \n
- Must be able to wear a full-face respirator. Must be clean shaven \n
\n
\n
- \n
- Must be able to lift, push, pull up to 50 lbs. \n
\n
\n
- \n
- Bending and stooping required \n
\n
\n
- \n
- May need to utilize step stool or elevated working platform to adjust within coating chamber and to disassemble/reassemble \n
\n
Safety Requirements \n
\n
- \n
- All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. \n
\n
- \n
- This position is subject to a pre-employment physical evaluation associated with wearing a respirator. \n
\n
\n
- \n
- This position must under-go annual physical evaluations associated with respirator use. \n
\n
Quality and Environmental Responsibilities \n
\n
\nDepending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System.\n
\n
Culture Commitment \n
\n
\nEnsure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.:\n
\n
I ntegrity - Create an Environment of Trust\n
\n
C ollaboration - Innovate Through the Sharing of Ideas\n
\n
A ccountability - Own the Process and the Outcome\n
\n
R espect - Recognize the Value in Everyone\n
\n
E nthusiasm - Find a Sense of Purpose in Work\n
\n
\nCoherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.\n
\n
\nIf you need assistance or an accommodation due to a disability, you may contact us at [email protected].\n
\n
\n#IND About Us \n
\n
\n Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us! \n
\n
Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.
Vacancy posted 3 hours ago
Similar jobs that could be interesting for youBased on the Coating Technician - ROTATING SHIFT in Saxonburg, PA vacancy
- Coherent Corp. in Saxonburg, PA seeks a coating operator to load designs into the coating system, run equipment per procedures, and document... ...in a clean-room setting with strict safety protocols. Evening shifts and physical requirements apply. #J-18808-Ljbffr Coherent Corp...Rotating shiftAfternoon shift
- ...TechnicianJoin Penn United Technologies as a Full-Time Electroplating Technician. You'll work alongside a skilled plating team to help set up... ...walk throughout an 8 hour shiftMust be able to work weekly rotating shifts of daylight, afternoon and midnight shiftsCompensation &...Rotating shiftFull timeContract workNight shift
- ...and safety-related information. \n Are comfortable working rotating shifts in an industrial environment. \n Communicate well with... ...pride in learning a specialized role and becoming a qualified technician through training and experience. \n Have basic computer...Rotating shiftFull timeShift work
- ...Apprentice Press Technician Cabot, PA 16023 Overview Position Type Full Time Job Shift Rotate between day, afternoon and/or mid Category Manufacturing Description Apprentice - Press Technician Penn United Technologies, Inc., a leading advanced contract...Rotating shiftFull timeContract workTemporary workApprenticeshipFlexible hoursShift workNight shift
- ...Job Description Primary Duties & Responsibilities Operation of thin film coating and test equipment including: Retrieving proper designs according to set schedule and programs into coating system operations controller Operate coating equipment according to...SuggestedNight shift
- ...TechnicianJSP is seeking a skilled Maintenance Technician with proven manufacturing experience to... ...effectively with operations, shift leadership, and maintenance teamsSupport... ...certified on a forkliftMust be able to work rotating 12-hour shifts, including overtime as neededAbout...Rotating shiftShift work
- ...Description Role requires rotating shifts of Days, Nights, Weekends and Holidays – Weekend and shift differential are offered Performs... ...basic understanding of buildingtrades and services. Assists Technician III and Technician IV personnel to the extent qualified....Rotating shiftCasual workFlexible hoursShift workNight shiftWeekend work
- ...Thin Film Coating Department Maintenance TechnicianRequired Skills & Experience:Associates or technical degree in a mechanical field preferred or equivalent work experience 3-5 years of experience in a maintenance position. Strong "hands on" mechanical abilities. Ability...Work experience placement
- ...standardsUnderstands project requirements and works to complete task with a high level of quality and workmanship in a timely mannerMaintains coating system operation components to a high level of performance with minimal or no downtimeRegularly and effectively communicates...Permanent employment
- ...\n \nCleveland-Cliffs Steel is seeking Hourly Production Technician employees to join us at our Butler, PA operation. Cleveland-... ...verbal and written. \n Willingness and availability to work rotating shifts 24 hours a day, seven days a week. \n \n \nCleveland-...Rotating shiftHourly payFull time
- ...Coating Technician Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced... ...a Coating Technician to join our team, initially working 1st shift hours during training and then 2nd or 3rd shift hours after training...Permanent employmentLocal areaNight shiftDay shiftAfternoon shift
- ...Check from the PA State Police systemPosition Type/Expected Hours of WorkIncumbent will be scheduled based on operational need (rotate shifts, standby, on-call, etc.).Travel may be expected locally between System locations.Equal Employment OpportunityIndependence Health...Rotating shiftWork at office
$18 - $19 per hour
...Production Technician Needed in East Butler This person will spend the majority of time on the plant floor operating equipment... ...labeling and stocking of raw materials. Schedule: 12 hour rotating shifts with some OT available Pay Rate- $18-19/hr Temp to...Rotating shiftPermanent employmentTemporary workWork at officeImmediate startShift work- Job Description Coating Materials Synthesis and Preparation: responsible for the synthesis and formulation of polymer coating materials. The candidate is expected to rigorously follow work instructions, ensuring consistency and adherence to performance specifications....Temporary work
$31.92 per hour
...$31.92 and up Position Summary The Heavy Equipment Technician is responsible for maintaining, diagnosing, and repairing a... ...documentation and OEM service procedures Willingness to work rotating shifts, nights, weekends, holidays, and overtime as required Physical...Rotating shiftNight shift- ...Job Description Job Description \n \n Shifts Available: 2pm - 10pm afternoon or 10pm - 6am midnight \n \n On the Job Training provided! \n \n PRIMARY DUTIES & RESPONSIBILITIES \n \n Production Processing \n \n \n Maintains production plan per...Full timeTemporary workShift workNight shiftWeekend work
- ...00 per hour Schedule: Full-Time | 7-3am shift OR 3-11pm shift Shift Differential: 2nd... ...organizationWhat You'll DoAs a Production Technician, you'll work as part of our... ...other shifts if needed (the job is NOT rotating shifts)Strong attention to detailReliable...Rotating shiftHourly pay16 hoursPermanent employmentFull timeTemporary workShift workNight shiftAfternoon shift
- ...Job Description Job Description Behind Every Great Part Is a Great Maintenance Technician. Join Us at CMC! Since 1963, Cygnus Manufacturing Company has been a family-oriented employer committed to providing a positive work environment, work-life balance, and opportunities...Temporary workFlexible hours
- ...Maintenance TechnicianBrayman Construction Corporation & Affiliates is seeking an experienced Maintenance Technician to join our Machine & Facilities Maintenance team in Saxonburg, PA.This is a hands-on position supporting the day-to-day operation and upkeep of our manufacturing...Hourly payFull timeFor contractorsCasual workWork at officeMonday to FridayAfternoon shift
- ...precision parts to meet or exceed production standards. Candidates must be available to work primarily on daylight and afternoon rotating shifts. About Us: Penn United, a leading advanced contract manufacturer since 1971, provides the highest quality precision...Rotating shiftFull timeContract workTemporary workFlexible hoursShift workAfternoon shift
- ...guidance, training, and support to junior facility maintenance technicians. \n Effectively collaborates with other maintenance staff... ...on a ladder or lift \n Working hours may consist of rotating shift, on-call, weekends, and holidays to support 24/7/365 operations...Rotating shiftFull time
- ...to provide direct care on medical/surgical units with day/night rotation. The role requires an active PA RN license, CPR, and clearances... .... You will work 32 hours per week, with rotating day and night shifts, delivering compassionate care and coordinating with the health...Rotating shiftNight shiftDay shift
$38 per hour
...Registered Nurse (RN) Location: Select Specialty Hospital - Alle Kiski (Natrona Heights, PA) Schedule: 7-7, PRN DAYS Shift, (No rotating shifts!) Compensation: $38.00 per hour, plus shift differentials for weekends Additional Perks: Free parking Our hospital...Rotating shiftHourly payDaily paidFull timePart timeReliefShift workNight shiftWeekend workDay shift- ...-site activities for prototype fabrication (this is not a work from home position). Work schedule is 5 days, 40 hrs per week, first shift. Physical Requirements Required to frequently lift/push/pull a minimum of 35 lbs Must be able to sit, bend, squat and walk about facility...Day shift
- ...Retrofitting or installing brand new surgical boom systems in healthcare facilities. Requirements: Certifications: Technicians are usually required to hold ASSE (American Society of Sanitary Engineering) certifications, such as ASSE 6040 and ASSE 6030 (Medical...Local areaAfternoon shift
- ...Brayman Construction is currently seeking a Fleet Automotive Technician to join our Field Support Team and help maintain our growing fleet... ...state-required safety inspections Installing, balancing, rotating, and servicing tires Completing scheduled preventative maintenance...For contractorsWork at officeLocal area
- ...construction required. Healthcare experience is a plus. May be required to work weekdays and/or weekends, evenings and/or night shifts if needed. Ability to lift, lower, push, pull, and retrieve objects weighing a minimum of 50 pounds. Must demonstrate the ability...Full timePart timeWork experience placementFlexible hoursShift workNight shiftWeekend workAfternoon shiftWeekday work
- ...Description: Title: Residential Technician Reports to: General Manager Job Type: Full-Time Location: Gibsonia, PA Come join our team and open the door to an amazing career at Thomas V. Giel Garage Doors! We have an immediate opening for...Full timeTemporary workImmediate startMonday to Friday
- ...customers with quality products and services. Responsibilities include fabricating hose assemblies per work order instructions. The technician will review hose instructions, pull and size material from stock, assemble components and complete documentation. Receiving and...Full timeRemote work
$30.65 - $39.67 per hour
...Project Maintenance TechnicianThe position of Project Maintenance Technician is a hands-on position, that provides technical expertise and... ...new solutions that improve performance and functionality.Shift: M-F 11pm-7amShift Differential: $1.50Hourly Rate $27-$33 depending...Temporary workFor contractorsWork at officeLocal areaShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Coating Technician - ROTATING SHIFT. Be the first to apply!
Related searches
- walmart technician Saxonburg, PA
- fisheries technician Saxonburg, PA
- oilfield technician Saxonburg, PA
- skilled technician Saxonburg, PA
- install technician Saxonburg, PA
- business technician Saxonburg, PA
- human resources technician Saxonburg, PA
- traffic control technician Saxonburg, PA
- airport technician Saxonburg, PA
- hospital technician Saxonburg, PA




