Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Boilermaker

SpaceX

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal ofenabling human life on Mars. BOILERMAKER Starbase is standing up on-site power generation for the Starbase supercomputer. This boilermaker role builds the plate, duct, and tank side of that plant. You fit, align, and weld turbine exhaust duct, selective catalytic reduction (SCR) casings and stack shell, and aqueous ammonia tanks. Where the steam side is set, you also install HRSG or steam-generator casing, modules, and pressure parts so the packages can be tied in and tested. RESPONSIBILITIES: Fit turbine exhaust duct from the package outlet to the SCR, including spools, expansion joints, dampers, and turning vanes Assemble SCR housing, stack shell, liner plate, and casing; land sections on the structural steel and bolt and weld them per drawings and specs Erect aqueous ammonia storage tanks and other field-erected or shop tanks; fit nozzles so pipefitters can tie in When HRSG or steam-generator parts are on the job, install casing, modules, headers, and tubes; align and weld pressure parts to the weld map and WPS Lay out, cut, bevel, and fit plate; set gaps, hi-lo, and alignment before weld-out, including purge and preheat where the WPS requires it Support hydro and pneumatic tests of tanks, duct, and pressure parts: install blinds and test packs, walk the seams, and repair weld leaks Rig and signal crane picks of duct, casing, stack cans, tank courses, and modules; keep every pick inside the lift plan Read arrangement, plate, tank, and weld-map drawings; flag conflicts with steel, piping, and equipment before a section is landed Work with millwrights at the turbine exhaust flange, ironworkers on supports and stack steel, and pipefitters at nozzles and tie-ins Stage plate, weld consumables, and tools; keep laydown yards and work fronts orderly Open and close work areas, including confined-space setups: protection, debris removal, scrap segregation, and end-of-shift reset so the next crew can start immediately Follow fall protection, confined-space, LOTO, PPE, and permit rules; do not work under a suspended load or on live systems without authorization Report damaged plate, bad fit-up, unsafe conditions, and drawing conflicts immediately BASIC QUALIFICATIONS: High school diploma or equivalency certificate 2+ years of hands-on boilermaker experience; OR completion of a recognized boilermaker apprenticeship; OR equivalent military experience PREFERRED SKILLS AND EXPERIENCE: Journey-level boilermaker card, NCCER Boilermaker, or equivalent credential Experience fitting and welding power-plant exhaust duct, SCR or stack plate, HRSG modules, or field-erected tanks Current ASME Section IX welder qualification (SMAW, FCAW, and/or GTAW) on plate or tube Tube welding to a WPS, including mirror welding, backing purge, and preheat AWS D1.1 for structural attachments where the weld map calls for it Qualified rigger and/or crane signalperson (NCCCO, NCCER, or equivalent) OSHA 10 or equivalent training, and a current confined-space qualification Ability to read arrangement drawings, plate details, tank drawings, and weld maps Experience working around aqueous ammonia or other power-plant emissions equipment Strong safety mindset; willing to follow fall protection, confined-space, LOTO, and permit rules ADDITIONAL REQUIREMENTS: Must be able to work all shifts, overtime and/or weekends as needed Must be able to work at heights and in confined spaces inside duct, stacks, tanks, and casings Able to stand for long periods; climbing, bending, kneeling, crouching, pulling, pushing, stooping, and stretching are required Able to lift at least 50 lbs. unassisted Must be able to work outdoors in South Texas heat, wind, and rain, and around 19% aqueous ammonia SCR equipment Must wear required PPE, including fall protection, confined-space gear, and respiratory protection when specified Able to work under adverse conditions (e.g., dirty, noisy, hot, confined, or at height) ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. * 1157, or (iv) Asylee under 8 U.S.C. * 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Aff... should reach out View email address on click.appcast.io. #J-18808-Ljbffr

Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Boilermaker in Brownsville, TX vacancy
  • Pipefitter Helper Communicates with Pipefitters and others to perform the job tasks. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. Assists with installation, maintenance and testing...
    Suggested

    Bechtel Construction Services

    Brownsville, TX
    1 day ago
  • $38 per hour

    Now Hiring – Pipe WeldersWe're seeking experienced Pipe Welders for a large-scale industrial project. Pay: UP to $38 p/h and $125 a day per diem. Hours: 6-12's Duration: LONG TERM WORK. Requirements:TIG (GTAW) pipe welding experience6G certificationIndustrial/process piping...
    Suggested
    Daily paid
    Immediate start
    Shift work

    Superior Skilled Trades

    Brownsville, TX
    4 days ago
  • Structural Steel Worker / IronworkerResponsible for assembling, erecting, and installing structural steel and precast components on industrial and commercial construction projects. This position involves heavy physical labor, precision alignment work, and strict adherence...
    Suggested
    Permanent employment
    Shift work

    PBI

    Brownsville, TX
    4 days ago
  • Rebar Ironworker JourneyReads and understand blueprints. Understanding of elevations given, understanding bundle tags.Aid in rigging operations, connections and disconnections.Selects rods, bundle, measures, cuts to length, bend, and shapes reinforcing bar to exacting ...
    Suggested

    Bechtel Construction Services

    Brownsville, TX
    2 days ago
  • Description Ironworker Location: Brownsville, TX Employment: Full-time Job Summary The Ironworker is responsible for building, reinforcing, and securing the steel framework in construction projects. They will be able to safely and accurately work at heights and work with...
    Suggested
    Full time
    For contractors
    Apprenticeship
    Local area
    Night shift
    Weekend work

    Acadian Contractors

    Brownsville, TX
    4 days ago
  • IRONWORKERSpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling...
    Permanent employment
    Apprenticeship
    All shifts
    Shift work
    Weekend work

    SpaceX

    Brownsville, TX
    5 days ago
  • Pipe Welder Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL. Shipyard experience is required. Housing assistance is available. For more information, please contact our team. Position Summary: Plan, layout, weld, install, test, and repair all types of...
    Work at office
    Local area
    Flexible hours

    Labor One Staffing

    Brownsville, TX
    5 days ago
  • Pipe Welder/Fitter We are seeking an experienced Pipe Welder/Fitter to support construction and facility operations in a fast-paced industrial environment. This position will perform welding and fabrication on process piping, structural steel, and facility equipment, including...
    Flexible hours

    Superior Skilled Trades

    Brownsville, TX
    4 days ago
  • $25 - $33 per hour

    Travel Pipefitter - Per Diem Job Description This role is responsible for fitting and welding complex stainless-steel piping systems that support critical industrial infrastructure and testing operations. You will perform high-quality welds on process piping ...
    Weekly pay
    Daily paid
    Contract work
    Temporary work
    Night shift
    Weekend work

    Aerotek

    Brownsville, TX
    3 days ago
  • $160 per hour

    Pipe Welder Labor One is currently hiring pipe welders in San Diego, CA at a shipyard. $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficiency in ...
    Daily paid
    Currently hiring
    Shift work

    Labor One Staffing

    Brownsville, TX
    3 days ago
  • Job DetailsJob Location: BROWNSVILLE, TX 78521Position Type: Full TimeEducation Level: High SchoolTravel Percentage: NegligibleJob Shift: AnyJob Category: ManufacturingKEY RESPONSIBILITY: KEY RESPONSIBILITY: Joins, fabricates, and repairs metal and other weldable material...
    Immediate start
    Shift work

    Forza Steel

    Brownsville, TX
    3 days ago
  • 1st Class Structural Welder Labor One is hiring 1st Class Structural Welders for a shipyard in Port St. Joe, FL. Shipyard experience is required. Housing assistance is available. Please contact our team for more information! POSITION SUMMARY: Lay out, fit, and weld...
    Local area
    Immediate start
    Flexible hours

    Labor One Staffing

    Brownsville, TX
    5 days ago
  • Labor One HiringLabor One is hiring 6G welders, structural welders, structural fitters, and structural fitter helpers for a project in Brownsville, TX and Ingleside, TX. Working 50-60 hours per week. Pre-testing at our Brownsville and Houston facilities! Please contact...

    Labor One Staffing

    Brownsville, TX
    5 days ago
  • Structural Ironworker ForemanIdentify practices and conditions that are safe as well as those that are at risk and provide appropriate, on-the-spot corrective action if needed.Check the adequacy of existing job/task methods and procedures.Provide appropriate, on-the-spot...

    Bechtel Construction Services

    Brownsville, TX
    5 days ago
  • Pipefitter Job Summary Support the buildout of supercomputer and power plant piping. This hands-on role focuses on installing large industrial piping systems and helping advance cooling, utility, and power-plant infrastructure projects. Responsibilities...
    Immediate start
    Shift work

    CORE Resources

    Brownsville, TX
    2 days ago
  • Pipefitter Journey 1. 5 + years of experience in industrial construction as a journeyman pipefitter. 2. Possess basic rigging skills. 3. Proficient in the use of small power tools (i.e. die grinder, right angle grinder). 4. Able to read and comprehend piping isometric...

    Bechtel Construction Services

    Brownsville, TX
    3 days ago
  • Structural AssemblerLays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.Responsibilities:Selects type...
    Local area
    Immediate start
    Flexible hours

    Brown & Root

    Brownsville, TX
    1 day ago
  • First Class Structural FittersWe are currently hiring first class structural fitters for a project in Panama City, FL shipyard.This position is open to U.S. citizens or US permanent residents only due to government contract.Must pass hands on at jobsite.Lodging assistance...
    Permanent employment
    Contract work
    Currently hiring

    Labor One Staffing

    Brownsville, TX
    2 days ago
  • Application Instructions Please complete the application and upload your resume. This position will perform welding on land and over water. Other duties (non-welding) will be assigned based on project needs. Position Description SUMMARY As a Welder...
    Contract work
    Immediate start
    Night shift
    Weekend work

    Russell Marine LLC

    Brownsville, TX
    5 days ago
  • Description Structural Welder Location: Brownsville, TX Employment Type: Full-time Job Summary We are seeking a skilled Structural Welder with a strong background in structural fabrication welding. The ideal candidate will demonstrate expertise in welding procedures, inspection...
    Full time
    For contractors
    Apprenticeship
    Local area
    Shift work

    Acadian Contractors

    Brownsville, TX
    3 days ago
  • $160 per hour

    Structural WelderLabor One is hiring structural welders for a project in San Diego, California. $160 per diem for those who qualify. Ceramic tape and shipyard experience is required. Ability to pass a background check prior to employment and ability to pass drug testing...
    Daily paid
    Work at office
    Local area
    Monday to Friday
    Shift work

    Labor One Staffing

    Brownsville, TX
    1 day ago
  • 1st Class Structural Welder - FluxcoreJob is in a San Diego California shipyard.Excellent opportunity----long term project.Offering per diem.Working 60 hours plus (6-7 days).Lodging assistance available.Transportation available for groups of 8+.Fluxcore (has to know ceramic...
    Daily paid
    Permanent employment
    Shift work

    Labor One Staffing

    Brownsville, TX
    4 days ago
  • $31 - $38 per hour

    Per diem- Pipe Welder Job Description We are seeking an experienced Pipe Welder to support the fabrication, installation, and modification of stainless steel ground support piping systems in a demanding industrial environment. This role involves fitting and welding...
    Weekly pay
    Daily paid
    Contract work
    Temporary work
    Night shift
    Weekend work

    Aerotek

    Brownsville, TX
    1 day ago
  • Pipefitter Labor One is hiring pipefitters for a shipyard in Pascagoula, MS. Shipyard experience is required. Housing assistance is available. The pipefitter lays out, installs, and maintains vessels' piping systems, such as heat and power, hot water, hydraulic, air pressure...
    Apprenticeship
    Local area

    Labor One Staffing

    Brownsville, TX
    5 days ago
  • $100 per hour

    Structural Welder - Per Diem OfferedBrownsville, Texas - Posted on October 27, 2026 Published By Jaime PetersonTrillium Construction is now hiring Stick Welders in the Brownsville, TX area! Per diem available for those who qualify!Schedule: Monday-Saturday, 6am-6pm. Pay...
    Daily paid
    Immediate start
    Shift work

    Trillium Staffing

    Brownsville, TX
    1 day ago
  • Rigging Specialist Assembles rigging to lift and move equipment or material to construction project. Responsibilities include loading, transporting, unloading, and assisting in selecting cables, ropes, pulleys, winches, blocks, and sheaves according to weight and size ...
    Local area
    Immediate start
    Flexible hours

    Brown & Root

    Brownsville, TX
    2 days ago
  • Company Description ADG Concepts is a global leader in the design and implementation of compressed air and gas systems for industrial and commercial clients. The company specializes in delivering high-performance, reliable solutions tailored to complex operational environments...
    Full time

    ADG Concepts

    Brownsville, TX
    3 days ago
  • SUMMARY Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects...
    Local area
    Immediate start
    Flexible hours

    Brown & Root

    Brownsville, TX
    4 days ago
  • Pipefitter - 1st Class A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube...
    Daily paid
    Immediate start

    Labor One Staffing

    Brownsville, TX
    1 day ago
  • Tackers WantedLabor One is hiring Tackers for a shipyard in Brownsville, Texas. Requirements:Experience is required.Must know how to tack 2,3, 4F with rod.Please contact our team for more information! Cell: (***) ***-**** or (***) ***-****. Please send us a text if we ...
    Work at office
    Local area
    Monday to Friday

    Labor One Staffing

    Brownsville, TX
    5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Boilermaker. Be the first to apply!