Metal Fence Laborer
Labormax Staffing
Job Description
Job Description
Job Summary
We are looking for reliable and hardworking laborers to assist with metal fencing installation projects. The laborer will support the fencing crew with material handling, site preparation, fence installation, and cleanup while maintaining a safe and productive work environment.
Duties and Responsibilities
- Assist with installation of metal fences, gates, and posts
- Carry, load, and unload fencing materials and tools
- Dig holes and prepare fence lines for installation
- Set fence posts using concrete and alignment tools
- Help measure, cut, and secure metal fencing panels and rails
- Operate hand tools and power tools safely
- Maintain clean and organized job sites
- Follow supervisor directions and safety procedures
- Assist with demolition and removal of old fencing when needed
Requirements
- Ability to perform heavy physical labor outdoors
- Must be able to lift 50+ pounds regularly
- Experience in construction or fencing preferred but not required
- Ability to work with hand tools, power tools, and measuring equipment
- Reliable transportation and strong attendance
- Ability to work as part of a team
Preferred Qualifications
- Experience installing chain-link, ornamental, or security metal fencing
- Knowledge of construction safety practices
- Ability to read measurements and basic layouts
Work Conditions
- Outdoor work in various weather conditions
- Standing, bending, lifting, and digging for extended periods
LaborMax Staffing was founded in 2002. The company began with one office in Las Vegas, Nevada. Since its humble beginnings.
LaborMax has now grown to more than 70 branches in 20 states nationwide. Here at LaborMax, we are putting the focus back on building quality relationships between employers and employees. Whether it is a short or long term, we can take care of it. If you are an individual looking for work or a business searching for the right person for your workforce, then look no further than LaborMax Staffing to meet all of your staffing needs.Company Description
LaborMax Staffing was founded in 2002. The company began with one office in Las Vegas, Nevada. Since its humble beginnings.\r\n\r\nLaborMax has now grown to more than 70 branches in 20 states nationwide. Here at LaborMax, we are putting the focus back on building quality relationships between employers and employees. Whether it is a short or long term, we can take care of it. If you are an individual looking for work or a business searching for the right person for your workforce, then look no further than LaborMax Staffing to meet all of your staffing needs.
Vacancy posted 12 days ago
Similar jobs that could be interesting for youBased on the Metal Fence Laborer in Atlanta, GA vacancy
$70k - $80k
Overview Ajulia Executive Search provided pay range. This range is provided by Ajulia Executive Search. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range $70,000.00/yr - $80,000.00/yr 5+ years of sales experience...SuggestedRemote jobFull timeFor contractors- Job Description Job Description The GEMÜ Group is an established leader in the manufacturing of valves and control systems, with a history extending over 50 years. This global company combines innovative technology with longstanding tradition. As a privately-owned ...SuggestedDay shiftAfternoon shift
Gemu Valves, Inc.
Atlanta, GA4 days ago $23 per hour
Job Description Job Description We are seeking a Welder Fabricator to become an integral part of our team! Perform a wide range of welding including MIG/ARC welding. Familiar with cutting pipe, building jigs, and prepping materials. Works from sales orders and/or...SuggestedContract workRecruit XL
Decatur, GA6 days ago- ...Description We are looking for skilled Welders to join a fast-paced manufacturing team. In this role, you will perform welding on various metal components, ensuring strong, precise, and high-quality welds. This position requires attention to detail, hand-eye coordination, and...SuggestedMonday to FridayShift work
Diversified Sourcing Solutions
Atlanta, GAmore than 2 months ago $18 per hour
...quality and safety in the workplace. You will follow blueprints and weld to meet product specifications. You will be welding sheet metal. Responsibilities: MIG welding on sheet metal Inspect material for holes in the metal welding Line up and weld the walls...SuggestedHourly payWeekly payPermanent employmentTemporary workWork at officeMonday to FridayAfternoon shiftThe Reserves Network
Forest Park, GA3 days ago- A recruiting firm is seeking a Mid-Senior level Sales Manager to oversee a remote sales team in the construction materials industry in Atlanta, Georgia. The ideal candidate will have over 5 years of sales experience, particularly with stone or concrete pavers, and possess...Remote jobFull time
$1,000 per month
...seeking an experienced and skilled Welder to join our team. Responsibilities Use various welding techniques to fabricate or repair metal parts according to blueprints or specifications. Adhere to safety standards and maintain the cleanliness of the work area. Qualifications...Local area- Acuity Brands, Inc is seeking skilled welders to fabricate and assemble aluminum products. The role involves using handheld welding equipment, reading blueprints, and ensuring the quality of finished products. Candidates should have training in GMAW/MIG and FCAW welding...
- Waste Management is looking for a Welder in Smyrna, Georgia. The position involves fabricating and repairing compactors, containers, and carts under general supervision. Responsibilities include performing minor repairs, conducting preventive maintenance, and ensuring compliance...Day shift
- ...a Welder Fabricator at ID3, a custom fabrication and scenic production company, you will be responsible for fabricating and welding metal components for custom builds, scenic elements, trade shows, exhibits, themed environments, and specialty structures. This role works...Casual workAfternoon shift
- Titan Electric is seeking a Prefab Shop Welder in Atlanta, GA to fabricate high-quality electrical assemblies for commercial job sites. The ideal candidate will have at least 2 years of MIG welding experience and be able to read basic drawings. This shop-based role offers...
- Overview D7 Pneumatics LLC is seeking skilled Field Welders / Fabricators to support installation, repair, and modification work inside active sawmill facilities. This position focuses primarily on stick welding (SMAW) and field fabrication of handrails, catwalks, structural...
- Waste Pro is seeking a skilled Welder based in Atlanta, Georgia. In this role, you will be responsible for performing repairs and maintenance on front and rear load containers including cutting, welding, and fabricating steel components. You will also ensure a clean and...
- SUMMARY OF POSITION The welder performs repairs and maintenance to equipment parts, vehicles and roll-off containers. Paints repaired and/or new containers. RESPONSIBILITIES Performs repairs and maintenance on front and rear load, and roll-off containers. Cuts/welds repairs...
- A company specializing in fabrication is seeking Field Welders / Fabricators in Atlanta, GA. The role involves stick welding and fabricating structures in active sawmill facilities. Candidates should have over 2 years of welding experience and be comfortable working in ...
- Ferguson Enterprises, Inc. is seeking an experienced Welder in Atlanta, GA. The role involves welding outlets onto steel pipes, performing specialty tasks, and ensuring quality inspections. Candidates should have 1 to 3 years of welding experience, strong interpersonal ...Work at officeMonday to FridayShift workAfternoon shift
- Waste Pro, USA is looking for a skilled Welder in Atlanta, Georgia. The role includes performing repairs and maintenance on equipment parts, vehicles, and roll-off containers, with responsibilities such as welding steel and aluminum components, fabricating parts, and maintaining...
- Overview Attention! This vacancy is temporarily suspended. Job Details Position: Terminal Station / vacancy available (part time and full time) Shift timing: part time 2-5 hours and full time 8 hours Salary: - Weekday: 218/day - Saturday: 250/day - Sunday: 320/day - Public...Full timePart timeShift workWeekday work
$45 per hour
Job Title: Per Diem, Travel Ship Fitter Welder Pay: $45/hr + $140 in daily per diem This is a fully onsite position in Charleston, South Carolina Job Description You will be responsible for the prefabrication for parts that will later be installed on aircraft carriers...Daily paidContract workTemporary work- ...specifications, drawings, and welding symbols. Prepares and completes work on materials by welding, cutting, grinding, and cleaning metal. Key Tasks & Responsibilities (Essential Functions) Follows all Acuity safety programs and requirements. Adheres to production schedule...
- ...welding, especially TIG, who takes pride in precision and quality. This role is hands‑on and plays a key part in producing high‑quality metal components. Key Responsibilities Weld stainless steel and other metals using TIG techniques to meet quality standards. Prepare...ApprenticeshipCurrently hiringWorldwide
- Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure with local service, nationwide. As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions...For contractorsLocal area
$17.41 - $26.11 per hour
Welder page is loaded## Welderlocations: Atlanta, GAtime type: Full timeposted on: Posted Todayjob requisition id: R-136297**Job Posting:**Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better infrastructure, better...Hourly payFor contractorsWork at officeLocal areaImmediate startAfternoon shift- Titan is a leading national electrical contractor with locations in Florida, Georgia, Texas, North Carolina, Tennessee, and South Carolina. Titan maintains a strong reputation as a leading high-quality, customer‑centric service provider which has resulted in strong financial...For contractorsApprenticeshipLocal areaFlexible hours
- ...Performs service calls for compactor repair. Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Performs all work within Standard Repair Times (SRTs). Works from prints, drawings and verbal instructions. Performs...Hourly payTemporary workMonday to FridayDay shift
$30 - $39 per hour
Job Description Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time ...Hourly payFull timeContract workWork experience placementLocal areaRemote workWorldwideRelocation packageShift workDay shiftAfternoon shiftGulftech Group
Atlanta, GA18 days ago- A leading specialty distributor located in Tucker, Georgia, is seeking a skilled Welder to join their team. You will play a vital role in completing customer projects that can save lives, employing your welding skills to work with various pipe fittings. Ideal candidates...
$218 - $450 per day
A temporary staffing agency in Atlanta is looking for candidates for the Terminal Station position, offering both part-time and full-time shifts. Responsibilities include handling terminal operations with no prior experience needed, as training will be provided. Basic English...Daily paidFull timeTemporary workPart timeFlexible hoursShift work- D7 Pneumatics LLC is hiring skilled Field Welders / Fabricators in Atlanta, GA. The role involves stick welding and fabricating handrails in active sawmill facilities. Candidates should have 2+ years of stick welding experience, work safely in industrial environments, and...
- Exploring Graphics, a division of Exploring, Inc., located in Atlanta, Georgia, is seeking a Welder Fabricator. You will fabricate and weld metal components for various custom builds and scenic elements. Strong teamwork and adherence to safety standards are essential. The ideal...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Metal Fence Laborer. Be the first to apply!
Related searches