MBG Quality Inspector
MBI
Job Details Job Location: MBG FL - Fort Pierce, FL 34946 Position Summary The Quality Inspector is responsible for the overall quality of the boat. This person ensures that all options and functions are checked and operate correctly along with ensuring the boat meets the cosmetic criteria and regulatory standards. Responsibilities Perform inspections at specific checkpoints and accurately and thoroughly record results. Be cross trained in all inspection points which may include but are not limited to: Vital to Quality (safety) verification, Regulatory verification, Functional verification, Cosmetic verification, Ensure all options in boat, On-the-water function and performance verification (Pool Test). Provide audits in all areas to support improvement activities. Train, certify and operate a crane/lift. General knowledge and understanding of required power tools. Stand and work in and around boats/molds throughout the entire day. Team oriented, contribute to positive morale within the department. Perform job functions safely and effectively in a fast-paced environment while wearing all required PPE and following safety policy and hazardous material guidelines. Practice good housekeeping by keeping work areas clean at all times. Other duties as assigned. Qualifications Education and/or Experience: High School diploma or general education degree (GED) with a minimum of two years’ experience in manufacturing. Basic computer skills are required. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence in English. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands Continuous/C = 67-100%, Frequent/F = 33-66%, Occasional/O = 33%, None/N = 33%. Sits: 0 hours, Stands: 8 hours, Walks: 2 hours, Drives: 0 hours. Employee Lifts and/or Carries: Maximum: 50 lbs., Frequently: 15 lbs., Occasionally: 30 lbs. Employee uses Hands for repetitive activities: Simple Grasping – Right constant, Left constant Pushing/Pulling – Right frequent, Left frequent Fine Manipulation – Right frequent, Left frequent Employee uses Feet for repetitive activities: Right None, Left None. Employee is required to perform these activities: Bending at Waist – Constant Squatting – Frequent Climbing Ladders, Stairs – Occasional Kneeling on Ground – Frequent Reaching Above Shoulder – Frequent Work Environment The work environment characteristics include heat/cold, dust/dampness, height, chemical, noise, dusty environment. PPE requirements are included. Safety glasses must be always worn. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Competencies Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others’ views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Motivation: Measures self against standard of excellence. Quality: Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Attendance/Punctuality: Is consistently at work and on time. Dependability: Takes responsibility for own actions.
- MaverickBoatGroup
- J-18808-Ljbffr MBI
- ...Job Purpose The Quality Control Inspector- DER/PMA ensures aviation articles meet manufacturer and operator specifications, including dimensions, condition, operational limits, and compliance with the company’s Quality Management System. This role is critical in maintaining...Suggested
- ...bonuses , depending on role and site. SUMMARY Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Tests and inspects products at various stages of the production...SuggestedWork experience placementLocal areaImmediate startFlexible hoursAfternoon shift
- ...Job Details Location: Opa-Locka, FL 33054 Position Type: Full Time Job Category: QA - Quality Control Position: Aircraft Quality Control Inspector Reports To: Quality Control Manager About Xtreme Aviation Xtreme Aviation is a premier FAA-certified Repair Station specializing...SuggestedFull time
- ...SUMMARY: The Quality Control Inspector II is directly responsible to the Chief Inspector, for the overall operation of the Inspection System. The Quality Control Inspector II mandates authority in releasing to service, appliances and components thereof additionally ensures...Suggested
- ...Description Job Title: Quality Control Inspector – Warehouse Reports to: Chief Inspector Classification: Non-Exempt; Hourly Position Location: Ocoee, Florida Status: Full Time Company Overview Fly Alliance is an industry-leading Part 135 and Part 145 private aviation group...SuggestedHourly payFull timeTemporary workWork at officeWorldwideFlexible hoursNight shiftWeekend work
- ...six continents. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Inspector plays a key role in maintaining high-quality standards while complying with GA Telesis processes. The ideal individual...Permanent employmentFull timeWork at officeWorldwide
- ...Aerostructures, a recognized leader in the repair and overhaul of aircraft structural components, is currently seeking a Quality Control Inspector to join our high-performing team. This position plays a key role in ensuring that all repaired components meet rigorous FAA...Flexible hours
$38 - $55 per hour
...performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and...Hourly payRelocation packageShift work- ...Job Molex, located in St. Petersburg, Florida, is currently seeking a Quality Control Inspector to join our team. The position involves validating and testing parts during the manufacturing process along with process audits to meet Molex’s quality and performance standards...Flexible hoursShift workWeekend workAfternoon shift
- ...resolve supplier certification and documentation discrepancies to the Purchase Order. Interpret and review blueprints, wiring lists, quality standards, manufacturers’ catalogs, customer specifications, reference manuals, and purchase order requirements to determine...Full timePart timeFlexible hours
$22 - $36 per hour
...Compensation:Hourly Pay Rate Range: $22.00 to $36.00Additional Hourly Pay Rate: $2.00 per licenseJob Summary : Inspectors are responsible to the Director of Quality for the performance of all required inspections in accordance with the Quality Control Manual, OEM’s manuals...Hourly payTemporary workFor contractors- ...Cubic Corporation is looking for an experienced quality control inspector to join their team in Town of Florida, New York. The role requires hands-on mechanical and electrical inspection experience along with a thorough understanding of quality management systems. The...
- ...primary source of power for our homes, businesses, and just about everywhere we thrive. We are seeking an experienced, dedicated Quality Inspector to join our team at Tampa. In this position, you will maintain quality standards by auditing in-process production, inspecting...Work at officeShift work
- ...recommendations Work alongside Manufacturing to reduce repeat warranty hits and findings during inspections Increase FTY Ensure established Quality standards and objectives are met or exceeded within area of Quality responsibility Review Quality/Warranty issues and determine...
- ...Position: Quality Inspector - Opa‑Locka, FL Only qualified candidates with the below experience will be considered for this position. Job Description & Requirements: You have an Airframe & Powerplant (A&P) Certification You have a minimum 3 years' aircraft maintenance...
- ...range of rotary and fixed wing components found on both commercial and military platforms around the world. ATI is seeking a Quality Inspector (FAA part 145 experience) for an immediate full time direct hire opportunity in Hollywood, FL. ROLE The Quality Inspector is responsible...Full timeContract workImmediate startWeekend work
- ...there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the... ...Danaher Business System which makes everything possible. The Quality Inspector II is responsible for verifying and validating whether products...Permanent employmentWork at officeWork visaMonday to FridayFlexible hours
$22 - $25 per hour
...The Quality Inspector is responsible for following Genesys Industries procedures to conduct the first article, in-process and final inspection on produced or procured mechanical and machined parts to ensure parts are defect‑free. Report directly to General Manager. Use...Hourly payFull timeMonday to FridayWeekday work- ...JMC Aviation are working with a global leader in the business aviation industry, and are looking to engage with Quality Inspectors on a permanent basis. This position is based in Opa-Locka, FL and offers an excellent salary rate, OT, signing bonus and some great benefits...Permanent employmentRelocation package
$19 - $30 per hour
...Quality Inspector (Job ID: 148130) Perform cable inspection activities on wire harnesses and cable assemblies in a high-mix aerospace and defense manufacturing environment. Support quality assurance operations by inspecting, verifying, and identifying non-conformances...Hourly payFull timeContract workWeekend workAfternoon shift- ...to hydraulic systems, Scotch to smartphones, OLED screens to paper, Pall helps protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. Pall has a more than 75-year history of discovery, determination, and innovation...Work at officeFlexible hours
$22 - $25 per hour
...Overview Mechanical Rubber – Custom Rubber Manufacturing We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. This role is responsible for ensuring products meet established quality and reliability...Hourly payFull timeMonday to Friday- ...Sandvik is seeking a Quality Assurance Inspector in Alachua, Florida. This role requires ensuring quality compliance in production processes and performing audits. The ideal candidate will have over 5 years of experience in a manufacturing environment and be proficient...
- ...Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and...Shift workAfternoon shift
- ...Sandvik has an opportunity for a Quality Assurance Inspector in Alachua, Florida USA (Greater Gainesville, FL area). Responsibilities Ensure Sandvik quality requirements/aspects are included into all operations and documented when needed. Organize, develop and perform...Full timeWork at office
- ...Sysco Northeast Rdc in Town of Florida, New York, is seeking a Finance Associate to oversee the quality of perishable products in the warehouse. This involves data entry, customer service, and regular quality checks to ensure high standards are met. The ideal candidate...
- ...critical components for the Aerospace, Defense, & Space industry. We are seeking a career-minded individual for the position of Quality Inspector, preferably someone who is looking for long-term growth and potential. In addition to the job description below, candidates...Full time
- ...is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. LAUNCH QUALITY INSPECTOR - NIGHT SHIFT Our Quality Inspectors are responsible for being the last line of defense in assuring mission success. You will...Permanent employmentWork at officeMonday to FridayShift workNight shift
- ...Description Precision CNC Manufacturer seeking experienced QC Inspector. The QC Inspector is responsible for inspecting incoming materials... ...specifications of the drawings and the parts meet customer's quality standards. The Quality Control Inspector performs a variety of...Full timeImmediate startFlexible hoursDay shift
$30.93 per hour
...The Quality Assurance Inspector at New Flyer is a crucial role focused on maintaining the highest quality standards for our buses. This position involves thorough inspections throughout various stages of the manufacturing process to ensure compliance with both internal...Hourly payWork at officeImmediate startMonday to FridayShift workDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MBG Quality Inspector. Be the first to apply!
- quality operator Florida, NY
- quality inspector Florida, NY
- quality receiving inspector Florida, NY
- quality assurance assistant Florida, NY
- quality control inspector Florida, NY
- quality control assistant Florida, NY
- quality intern Florida, NY
- quality lead Florida, NY
- quality improvement nurse Florida, NY
- quality facilitator Florida, NY

