Maintenance Tech

Country

United States of America

State / County

California

City

Irvine

Division

Wyman Gordon

Company

Rollmet

Function

Maintenance

Workplace Type

On-Site

Position type

Full Time

Opportunity ID

22622

Job Description

Position Summary

Level three mechanics work under minimal supervision to perform turret/spindle alignments, PM tasks such as trouble shoot lubrication system, hydraulics, bar feeders, etc. trouble shoot controls, issues etc., able to diagnose and repair most any NC mechanical issues; pull and replace ball screws, hydraulic and pneumatic issues. The Hybrid Maintenance Technician is a highly skilled, multi-craft professional responsible for performing advanced mechanical and electrical troubleshooting, repair, installation, and preventive maintenance on CNC/NC machines, production equipment, and facility systems. This role operates with minimal supervision and serves as a technical subject matter expert (SME) in both mechanical and electrical disciplines. Typically requires 6-10+ years of experience in an industrial/manufacturing environment. Must be of US person status to be in position.

Primary Duties & Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, ability and/or competency needed for successful performance in the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Diagnose and repair NC/CNC machine issues, including turret/spindle alignment and ball screw replacement
• Troubleshoot and repair:
• Perform preventive maintenance (PM) and full equipment overhauls
• Maintain furnaces, presses, cranes, forging equipment, and blast systems
• Repair refractory linings and assist with specialized furnace components
• Inspect, repair, and maintain electrical systems on all plant equipment, including:
• Troubleshoot and repair:
• Rewire and modify circuits (24V-480V, single & three-phase)
• Use testing equipment to diagnose voltage, load, grounding, and faults
• Install and commission new machinery and equipment (mechanical and electrical)
• Perform electrical work for:
• Install conduit (EMT and rigid), wiring, and mechanical components
• Read and interpret:
• Inspect equipment for wear, damage, and safety compliance
• Diagnose issues using sound, vibration, and performance data
• Test equipment post-repair to ensure proper operation
• Conduct routine inspections and maintenance to prevent failures
• Maintain logs and documentation of equipment status and repairs
• Communicate with production teams to resolve issues
• Assist in training and mentoring junior technicians
• Support continuous improvement and reliability initiatives
• Perform general facility repairs including:
• Support contractors during installations and major repairs

Required Skills:

• Strong knowledge of:
• Ability to read and interpret:

Experience using:

• Electrical test equipment (voltmeters, amp meters, etc.)
• Precision measuring tools (micrometers, calipers)
• Welding, cutting, and fabrication tools
• Alignment and diagnostic tools
• Diagnose complex mechanical and electrical issues independently
• Apply math concepts including algebra, geometry, and measurements
• Work effectively with limited standardization

Preferred Skillset

• Multi-skilled in both mechanical AND electrical maintenance
• Strong experience in:
• Able to work:
• Background in heavy manufacturing, forging, or aerospace is highly preferred

Experience & Education

• 6-10+ years of industrial maintenance experience
• Associate degree or technical training preferred
• Equivalent combination of education and hands-on experience accepted

Physical Demands

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

Work Environment

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

PCC Rollmet is an equal opportunity employer. The company's policy and practice is to provide equal employment opportunities and to assure those opportunities, without regard to age, sex (including pregnancy, childbirth, breastfeeding or related medical conditions, gender, race, color, creed, national origin, ancestry, sexual orientation including gender identity or gender expression, religion, (including religious dress and religious grooming), mental or physical disability, legally protected medical condition, genetic information, marital status, military or veteran status, reproductive decision making, or any other status protected by applicable local, state or federal anti-discrimination laws.

ITAR Requirements:

Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States.

Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other status protected by applicable law.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For informational purposes only, the range of pay for this role is $28 to $40 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.


This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.