Air Conditioning Equipment Mechanic

The primary purpose of this position is to install, repair, and modify large/complex systems that provide for a variety of air conditioning functions such as heating, cooling, humidifying, dehumidifying, cleaning, filtering, and circulating. Major Duties The employee repairs and maintains a variety of large commercial and industrial refrigeration and air conditioning systems and supporting equipment with complex problems and extensive repairs requiring judgment to locate malfunctions. Plans, lays out, and installs a variety of large complex commercial and industrial systems and supporting equipment used to condition air in warehouses, shops, hangars, hospitals, and large office buildings. Troubleshoots a variety of large commercial and industrial refrigeration and air conditioning systems and supporting equipment. Checks elements which control low and high side pressure; the temperature of the cooling units, liquid and suction lines, and the running time of various mechanisms. Utilizes established safety practices, rules, regulations, and procedures to maintain a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing such as safety shoes, glasses, ear protection, face masks, and/or hard hats. Uses and maintains tools. Maintains records and documents actions. Installs, modifies, troubleshoots, repairs and maintains a variety of large commercial and industrial heating boilers and/or heating systems and supporting equipment. Performs work on power boilers which use gas, oil, or a combination of fuels for hot water production and distribution plants. Conditions of Employment U.S. Citizenship Required Males must be registered for Selective Service, see This posn is subject to provisions of the DoD Priority Placement Program Disclosure of Political Appointments Direct Deposit: All federal employees are required to have direct deposit. Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period. Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. Shift work may be required. Emergency overtime may be required. The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license is required for the position. Position requires CFC/NCFC Certification (universal) as required by 40 CFR Part 82, Subpart F., EPA. Recall to duty may be a requirement of this position. The physical requirements of this position as determined by the manager are: The employee lifts, carries, and handles equipment up to 50 pounds unassisted and over 50 pounds with assistance. Works from ladders, scaffolding platforms, or cramped areas where equipment, parts, or tools are hard to reach. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods. In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys as required. This position has been designated be the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security and public safety. Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 INDUSTRIAL EQUIPMENT MAINTENANCE GROUP . Although a specific length of time and experience is not required for most blue‑corner positions, you must meet any screen‑out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of an AIR CONDITIONING EQUIPMENT MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of the principles and theories of air conditioning and refrigeration and properties of refrigerants. Knowledge of the construction and operation of a variety of large commercial and complex industrial systems. Knowledge of safety regulations, practices, and procedures. Skill in dismantling, repairing, and reassembling pumps, impellers, compressors, chillers, receivers, and evaporators. Skill in maintaining difficult balances of a variety of refrigerant controls and complicated motor controls. Skill in troubleshooting complex problems on large projects applying prescribed test procedures and equipment. Skill in the use of hand tools, power tools, and a variety of test equipment. Ability to interpret instructions, specifications, etc. (including blueprint reading). PHYSICAL EFFORT: The employee lifts, carries, and handles equipment up to 50 pounds unassisted and over 50 pounds with assistance. Works from ladders, scaffolding platforms, or cramped areas where equipment, parts, or tools are hard to reach. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods. In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys as required. WORKING CONDITIONS: The employee works indoors and outdoors, on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to toxic refrigerants, noxious gases, fumes, or acids. Subject to possible burns from refrigerants. Works near moving parts of equipment and machinery, energized electrical circuits, sharp metal edges, loud noises, and toxic fumes, which could cause cuts, burns, and respiratory ailments. Maybe subject to sudden and frequent tempature changes. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education This job does not have an education qualification requirement. Additional Information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. For more information. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. To determine the applicable PPP Self‑Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information. If you have questions regarding this announcement and have hearing or speech difficulties. Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. #J-18808-Ljbffr industrial maintenance jobs