25-26 Locksmith
Midway ISD
Locksmith
Maintain all locksets and door hardware.
Salary calculations will be commensurate with job experience.
Qualifications:
Education/Certification: Clear and valid Texas driver's license High School Diploma or GED Certificte
Special Knowledge/Skills/Abilities: Ability to follow verbal and written instructions Knowledge of basic construction and routine maintenance and repair procedures Ability to communicate effectively (verbally) Ability to operate hand and power tools Ability to work independently
Experience: Three (3) years experience as a locksmith. Five (5) years experience in general building maintenance
Major Responsibilities and Duties:
Maintenance and Repair 1. Maintain all door hardware in the district. 2. Change lock combinations, set locks for as many as four different keyways, disassemble and repair locks, make keys, install locks/door checks/panic hardware. 3. Responsible for issuance of keys to employees and vendors. 4. Troubleshoot and repair RFID card readers/door hardware. 5. Complete repairs as directed on work orders or by administration. 6. Assist with general maintenance as needed to complete tasks. 7. Preform all other duties as assigned by supervisor.
Safety 8. Follow established safety procedures and techniques to perform job duties, including lifting and climbing. Operate equipment and use tools according to established safety procedures. 9. Correct unsafe conditions in work area and promptly report any conditions that are not immediately correctable to supervisor. 10. Maintain tools and equipment and perform preventive maintenance as required.
Supervisory Responsibilities: None
Mental Demands/Physical Demands/Environmental Factors:
Tools/Equipment Used: Small hand tools, power tools, and measuring tools; light truck or van Posture: Frequent standing, kneeling/squatting, bending/stooping, pushing/pulling, and twisting
Motion: Frequent walking, climbing stairs/ladders/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving Lifting: Heavy lifting and carrying (45 pounds and over) on a daily basis Environment: Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, dust, toxic chemicals and materials, noise, vibration, and electrical hazards; work around machinery with moving parts; may work alone; regularly work irregular hours; occasional prolonged hours; frequent districtwide travel
Mental Demands: Work with frequent interruptions; maintain emotional control under stress
This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.
Midway Independent School District does not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, age, disability, military status or on any other basis prohibited by law. Employment decisions will be made on the basis of each applicant's job qualifications, experience, and abilities.
- ...Independent School District Human Resources Department Job Title: Locksmith Reports to: Coordinator for Maintenance Dept./School:... ...Maintenance Exemption Status: Non-Exempt / 250 Days Date Revised: 9/26/2024 Salary calculations will be commensurate with job...SuggestedImmediate start
- Job Title: HVAC Reports to: Coordinator for Maintenance Dept./School: Maintenance Exemption Status: Non-Exempt / 251 days Date Revised: 7/11/2024 Salary calculations will be commensurate with job experience. Primary Purpose: Under general supervision...SuggestedImmediate startRelocation
$25 - $28 per hour
...Job Location: Waco, TX Area Job Type: Full-Time Schedule: Monday–Friday, 6:00 AM to 2:00 PM, with overtime as needed Pay: $25.00 - $28.00/hr Job Summary Crouch Staffing Solutions is seeking an experienced Sheet Metal Fabricator for a Waco-area company....SuggestedFull timeMonday to FridayShift work$28 - $30 per hour
...efficiency Straightforward day shift schedule Shop culture that values experienced machinists ---Pay, Benefits & Schedule Pay Range: $26.00 – $30.00 per hour (DOE) Schedule: Monday–Friday | Day Shift On-site only (approximately 30 miles east of Waco, TX) Overtime: Available...SuggestedHourly payFull timeMonday to FridayShift workDay shift$21 - $25 per hour
...a Glance Company: Confidential Central Texas Machine Shop Location: Near Waco, TX (On-Site) Job Type: Full-Time Pay Range: $21.00 – $25.00 per hour (based on experience) Shift: Day Shift | Monday–Friday (standard 8-hour shifts) Overtime: Available as needed Experience...SuggestedHourly payFull timeMonday to FridayShift workDay shift- ...climb, balance, bend, kneel, crouch, or crawl. Must regularly lift up to 10 lbs, frequently lift up to 15 lbs, and occasionally lift 25-50 lbs. Visual abilities must include close, peripheral, and depth perception, and the ability to adjust focus. Must be able to...Immediate startWeekend work
- ...Frequently sit, climb, balance, stoop, kneel, crouch, or crawl. Lift and/or move up to 10 lbs regularly, up to 15 lbs frequently, and up to 25–50 lbs occasionally. Visual acuity to inspect fine details, depth perception, and ability to adjust focus. Moderate noise...Seasonal workImmediate startWeekend work
- ...andor above 100 degrees for more than an one hour Medium work: Lift up to 50 lbs at a time and frequently lift or carry objects up to 25 lbs Climbing - ascending/descending ladders, stairs, scaffoldings, ramps, etc Balancing-walking, standing, crouching on various surfaces...Daily paidFull timePart timeWork experience placementWork at officeLong distanceFlexible hours
$19.44 per hour
...environmental conditions; no effective weather protection Medium work: Lift up to 50 lbs at a time and frequently lift or carry objects up to 25 lbs Balancing-walking, standing, crouching on various surfaces without falling Kneeling-bending legs at knee to come to a rest on...Hourly payFull timePart timeInternshipWork at officeImmediate startFlexible hoursShift workDay shift$20 - $25 per hour
...Quality Assurance Lab Technician Location: 2551 Wilsonart Dr, Temple, TX, 76504, United States Base Pay: $20.00 - $25.00 / Hour Employee Type: FT Non-Exempt Required Degree: High school Minimum Experience: 2 Years Manage Others: No...Hourly payWork at office$25 - $55 per hour
...in the work. Applicants must have a valid driver’s license and a clean driving record. Our employee benefits include: $25 - $55 per hour* Sign on bonus* Relocation package* Health Insurance Dental Insurance Vision Insurance Life Insurance...Hourly payFull timeRelocation packageFlexible hours- JOB SUMMARY: Must recognize that you are part of a team and should promote a positive work environment by leading by example. Must be self-motivated to continually work with high standard results. Must be able to follow verbal and written instructions with little...Shift work
- Job Description Job Description POSITION RESPONSIBILITIES: •This occupation performs the sheet metal fabrication, machining, and set up for production requirements of various aircraft parts and components. Requires setting up fixtures and planning the sequence of...Full timeShift workWeekend work
$20 - $25 per hour
...concerns • Maintain accurate service notes and work orders • Provide professional and friendly customer service Compensation: $20 - $25 per pool depending on experience • Perform routine pool cleaning and maintenance • Test, balance, and treat pool water chemistry •...$17 per hour
...Comprehensive insurance benefits. Retirement: 401K plans. Paid Time Off: Generous paid time off. Life Insurance: Company paid $25,000 life insurance policy. Company Vehicle: Provided upon completion of training. Device Plan: Monthly stipend for using your...Base plus commissionHourly payDaily paid2 days per week$18.04 - $25.93 per hour
...level of formal training as well as the legal (state licensed) ability to work on refrigeration systems Base Pay Range: $18.04 - 25.93 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training,...Full timeTemporary workFlexible hoursAfternoon shift$30 - $35 per hour
...Job Title: Field Service Mechanic A Waco, TX, USA, 76706 Posting Start Date: 5/12/26 If you are currently an employee of Herc Rentals, please apply using this link: Herc Employee Career Portal Founded in 1965, Herc Rentals is one of the leading...Hourly payLocal area- Job Description Job Description CNC Operator Position Summary This is a full time, onsite role based in Central Texas, approximately 40 minutes east of Waco. The position is designed for an experienced CNC Operator who thrives in a production driven machining environment...Full timeRemote work
$28 - $30 per hour
Job Description Job Description Position Summary This is a full-time, onsite CNC Machinist role focused on lathe and mill setup and operation within a busy machining and fabrication environment in Central Texas. This position is hands-on and shop-floor driven, not...Hourly payFull timeRemote work$20 - $28 per hour
Job Description Job Description Company Description Alamo Structural Steel, LLC is a leading structural steel fabricator in Texas, committed to integrity, quality, and excellence. We take pride in delivering high-quality fabricated steel on time while upholding...Hourly payShift workNight shiftWeekend work- CNC Horizontal Milling Machinist Job Overview: Smith Pump is seeking a skilled CNC Machinist to join our team. The ideal candidate will have extensive experience setting up and operating large machine tools such as lathes, milling machines, boring machines, and grinders...Live out
$16 - $25 per hour
.... Must be able to drive company vehicles to each job site. ***Pay commensurate with experience*** Compensation: $16.00 - $25.00 per hour Join The Generator Supercenter Family - Here it's not just some catchy phrase; it's a lifestyle. We're looking for...Hourly payTemporary work$17 per hour
Technician will perform multiple automotive services ranging from oil changes to timing belts. Services to include but not limited to: Brakes, Steering and Suspension, Wheel Alignments, Electrical and Electronic diagnostics, and HVAC. Experienced prefered but will consider...Hourly payFull time$21 - $24 per hour
Job Description Job Description CNC Machine Operator Location: Waco, TX Shift Options: ~1st Shift: 6:00 AM – 2:00 PM ~2nd Shift: 2:00 PM – 10:00 PM ~3rd Shift: 10:00 PM - 6:00 PM Pay: $21–$24/hr (DOE) Please apply at Job Summary We are seeking...Shift workNight shiftDay shiftAfternoon shift$25 - $45 per hour
...diagnostics, maintenance, and complex repairs while maintaining Ford factory standards and delivering high-quality workmanship. Pay $25 - $45 per flat rate hour Relocation Incentive For qualified candidates relocating more than 50 miles to Waco, TX, we offer up to...Price workFull timeLocal areaRelocationRelocation packageFlexible hours$725 per month
Job Description Recognized by Newsweek in 2024 and 2025 as one of America's Greatest Workplaces for Diversity Grow your career with Brookdale! Our Med Tech's / QMAP's have the option to explore exciting opportunities for advancement in positions such as Resident ...Hourly payFull timeTemporary workPart timeFlexible hours$17 - $29 per hour
Astound is a leading provider of internet, WiFi, mobile, and TV services, dedicated to connecting communities and empowering lives through innovative technology. We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award...Hourly payFull timeLocal area- What we offer: Work-life balance Career advancement opportunities A great manager and/or team A compelling work culture A sense of purpose The Senior Service Technician reports to the Area Service Manager, and is responsible for performing a wide...Full time
$725 per month
Job Description Recognized by Newsweek in 2024 and 2025 as one of America's Greatest Workplaces for Diversity Grow your career with Brookdale! Our Med Tech's / QMAP's have the option to explore exciting opportunities for advancement in positions such as Resident...Hourly payFull timeTemporary workPart timeFlexible hours- Compensation range for the role is listed above. Applicable salary ranges may differ across markets. Actual pay will be determined based on experience and other job-related factors permitted by law. As a part of the compensation package, this role may include eligible ...Live inLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to 25-26 Locksmith. Be the first to apply!




