Building Engineer II
HealthPartners
HealthPartners is hiring for a full-time Building Engineer II. REQUIRED QUALIFICATIONS: Diploma graduate from an area vocational technical institute in commercial building maintenance or five (5) years' experience in commercial building maintenance in facilities with at least 20,000 square feet, and with the completion of vocational technical training of at least one (1) course in each of the following areas: mechanical maintenance, electricity, plumbing, carpentry, and heating and cooling systems (HVAC). Equivalency consideration will be given to individuals with ten (10) years' experience working in a commercial facility in the areas of mechanical maintenance, electricity, plumbing, carpentry, and heating and cooling systems (HVAC). Meet the minimum standards for Building Engineer II position including: 1. Electrical a. Know electrical codes and follow electrical safety practices. b. Working knowledge of AC, DC, single-phase and three-phase power and low voltage. c. Trouble shoot electrical circuits using multi-meter. d. Familiarity with wiring diagrams/schematics. 2. Plumbing a. Working knowledge of plumbing accessories, valves, pumps, seals, etc. b. Able to install, repair or replace toilets, sinks, faucets, flush valves. c. Know proper use of power snake for drain lines. d. Able to repair various piping systems (copper, plastic, galvanized, etc.) 3. Heat and Air-Conditioning a. Understand operation, and have a working knowledge, of various mechanical systems (boiler, heat pumps, cooling towers, roof tops). b. Understand the refrigeration cycle. c. Working knowledge to check and charge system refrigerants, pressures and recovery. d. Able to perform preventive maintenance tasks on HVAC equipment, motors, filters, compressors, bearings, pumps, etc. e. Able to trouble shoot electrical and pneumatic problems. f. Understand water treatment for boilers/cooling towers. g. Have a basic understanding of energy management systems (including operation, monitoring and alarms) and knowledge of direct digital controls. Possess Universal CFC Certification and be currently licensed in the State of Minnesota with a First Class boiler-operating license. Pass bonding and security clearance requirements. Possess a current valid driver's license and reliable transportation. Demonstrated ability to work independently with minimal supervision. Effective verbal and written communication skills. Show initiative and remain solution-oriented. Courteous, cooperative and able to establish effective working relationships. Ability to learn and work with computer systems. Ability to compute mathematic calculations (add, subtract, multiply, divide). Detail orientation, accuracy, and the ability to follow instructions. Effective organization and prioritization skills. Pass HealthPartners pre-employment physical exam. Knowledge of health codes, national and local fire codes. PREFERRED QUALIFICATIONS: Certificate of completion of specialized training in electricity, plumbing, carpentry, HVAC, and/or related field. Experience as a commercial building maintenance technician. Experience in a medical facility. Residence within twenty (20) minutes driving time to the clinic. Experience in grounds maintenance, landscaping, snow removal and parking lot maintenance Experience with and ability to operate and understand computerized energy management systems. PHYSICAL REQUIREMENTS: Must be able to stand for long periods of time. Must be able to push/pull carts and other equipment, climb, lift (80 lbs.) and shovel snow. Possess manual dexterity and visual acuity to complete required duties and responsibilities. This position requires working in various temperature conditions and noise levels; in indoor and outdoor settings; and around fumes and/or hazardous odors, dust, and chemicals. POSITION PURPOSE: Service excellence is to be centered on patient care and patient/member relationships and is the responsibility of all employees. Teamwork is the norm and all employees will be held accountable to work as effective team members. The Building Engineer II position is responsible for maintaining the general condition, operation, and appearance of HealthPartners/GHI property (buildings, grounds, parking lots) including basic electrical, carpentry, plumbing, HVAC, mechanical, and painting work. ACCOUNTABILITIES: Install, monitor and maintain all operating equipment and property throughout assigned locations. Identify and make needed repairs and/or replacements throughout assigned locations (including furniture, fixtures, equipment, walls, doors, windows, floors, woodwork, paint, etc). Anticipate staff and patient/member needs, respond promptly, and acknowledge all needs in a manner that best represents site operation. Ensure that all assigned locations' space temperatures and appearances are maintained and appropriate for staff and patient/member comfort and experience. Respond to and resolve facilities-related issues, concerns, and/or complaints in a timely and professional manner. Maintain accurate log entries to record equipment in need of repair, and prioritize efforts accordingly. Report hazards and/or injuries to site leadership and/or the Facilities Engineering Supervisor, and take immediate action to correct the issue(s). Perform security and safety procedures as established by site leadership and the Facilities Engineering Supervisor. This may include performing clinic opening and closing procedures. Assist as required during life safety and medical events. Consult with contractors/vendors as needed, with prior authorization from site leadership and/or the Facilities Engineering Supervisor. Respond when contacted as part of the emergency call list, and assist on location in the event of a disaster. Monitor and maintain cleanliness, sanitation, and organization of all engineering areas. Perform general cleaning and floor care at assigned locations, monitoring custodial services and reporting issues and/or concerns to site leadership and the Facilities Engineering Supervisor. Monitor, complete, and document preventative maintenance in accordance with the preventative maintenance schedule/program for staff and patient facing areas, property infrastructure, and equipment. Manage, update, and provide input on the preventative maintenance computer system. Complete maintenance request work orders for all assigned locations in a thorough and timely manner. Perform ground maintenance for assigned locations. Ensure that all equipment required for day-to-day activity is scheduled and operating properly. Make recommendations related to saving energy, resources, or otherwise acquiring/maintaining sustainability. Make recommendations to improve site-related safety and loss prevention. Act as a resource to Building Engineer I, assisting in analyzing problems, reviewing cost estimates, and making recommendations for use of outside contractors. Assist Building Engineer I in performing installations, repairs and grounds maintenance as needed. Provide input for building budget development, management, and cost forecasting. Other duties as assigned. #J-18808-Ljbffr
$58.2k - $87.24k
A leading construction firm in Minnesota seeks a Project Engineer II to support construction teams in achieving project goals. Responsibilities include managing project scope, ensuring safety on job sites, and collaborating with subcontractors and team members. Candidates...SuggestedFor subcontractor$84.1k - $113.5k
...Mortenson is currently seeking an experienced Design Phase Engineer I that will provide support to project leadership during the design... ...- $113,500. The base pay range for the Design Phase Engineer II role is $- $. (Actual range is higher for the following office...SuggestedFull timeContract workH1bWork at officeRemote work$130.29k
RF Design Engineer II (Multiple Positions) - Starkey Laboratories, Inc. (Eden Prairie, MN Contribute to the design, implementation, and optimization of wireless designs in hearing aids and hearing aid accessories. Duties include: design wireless hardware for products through...SuggestedFull timeTemporary workWork at office- Opus Group is seeking multiple Project Engineer II, Construction roles to support day-to-day field operations on commercial projects across Des Moines, IA; Omaha, NE; Minneapolis, MN; Chicago, IL; Indianapolis, IN; Kansas City, MO; Phoenix, AZ; and Denver, CO. This role...SuggestedFor subcontractorLocal area
$59.94k - $89.85k
...****@*****.*** Description We are seeking multiple Project Engineer II, Construction positions for our Des Moines, IA,, Omaha, NE,... ...occasional travel required depending on project needs. We build more than buildings. We are building greatness in both our projects...SuggestedContract workFor subcontractorWork at officeLocal areaImmediate start- **Job Title:** Manufacturing Engineer II **Location:** Little Canada, MN - 100% Onsite **Pay Range:** $35/hr to $40/hr on W2 **Mode:** 12 Months Contract - 7am to 3.30pm **Job Details:** + Support and continuously improve manufacturing processes, tooling, and fixtures to...Weekly payContract workTemporary workFlexible hours
$80k - $95k
...Manufacturing Engineer IIThe Manufacturing Engineer II will be a combination position of a Project Engineer and a Manufacturing Engineer for the Orthopaedic Implants group. This individual will interface with customers, engineering, quality, manufacturing, and operations...Temporary workWork at office$61.3k - $122.7k
...colleagues serve people in more than 160 countries. Manufacturing Engineer II Divisional Information Structural Heart Business... ...for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity...For contractorsWork experience placement$80k - $95k
...Manufacturing Engineer IIExceptional People. Hard Problems. Meaningful Careers. Big Impact. Nowhere else can... ...: At Forj Medical, the Manufacturing Engineer II will work cross functionally to manage the production build of complex electro-mechanical medical devices. A...Local area- ...Job Title Design Engineer II Position Summary The Design Engineer II is responsible for working with other leadership members to guide and lead cross‑functional teams to execute compliant development, manufacturing, marketing and sales of medical devices. This position...Work at office
$45 - $55 per hour
...Job Description Job Description Job Title: Design Engineer II Job Description The Design Engineer II supports the development,... ...Support product development activities including feasibility builds, prototype testing, design reviews, design verification, validation...Contract workTemporary workWork at office$94k - $104k
...way. Each member of the Bracco Medical Technologies team has the power to make a difference......every day! -The Product Support Engineer II will provide customer and technical support for ACIST/Bracco products to our customers, ensuring compliance with all ACIST...Full timeTemporary workCasual work$61.3k - $122.7k
Design Assurance Engineer II - Plymouth, MN Responsibilities Lead and implement complex development projects including quality improvement initiatives. Set strategies for cross‑functional teams and drive toward compliant and efficient solutions to complex problems....For contractors- Starkey Laboratories, Inc. in Eden Prairie, MN, seeks an RF Design Engineer II to contribute to wireless design for hearing aids and accessories throughout the product development process. Responsibilities include testing RF performance, troubleshooting units, implementing...Full timeWork at office
$130.29k
"RF Design Engineer II (Multiple Positions)" Job Category : Engineers Requisition Number : RFDES007482 Posted : July 20, 2026 Full-Time On-site Locations Showing 1 location Eden Prairie, MN 55344, USA Description RF Design Engineer II (Multiple Positions) - Starkey Laboratories...Full timeTemporary workWork at office$95k - $104k
...way. Each member of the Bracco Medical Technologies team has the power to make a difference......every day! The Design Assurance Engineer II position will support design assurance activities for Bracco Medical Technologies (BMT) products. This role is responsible for...Temporary workCasual workWork at officeNight shift$21.05 - $42.15 per hour
...Technician II, Manufacturing - Weekend Shift At Abbott, you can do work that matters, grow, and learn, care for yourself and your... ...ensure continuous operation for production equipment Assist engineers in troubleshooting safety, quality or process issues Perform...For contractorsWorldwideShift workWeekend work- Starkey Laboratories, Inc. in Eden Prairie, MN is seeking a RF Design Engineer II to contribute to wireless designs for hearing aids and accessories. The role covers design through manufacturing transfer, with hands-on testing to characterize RF performance and ongoing...
$50 - $60 per hour
...BUILDING DIAGNOSTICS & STRUCTURAL ENGINEER, P.E. Flexible Full-Time or Part-Time | Home-Based | Twin Cities Field Work Join Criterium-Twin Cities Engineers, an established specialist consulting firm based in Edina, Minnesota. We help homeowner associations, property...Hourly payFull timePart timeWork at officeLocal areaWork from homeHome officeFlexible hours- ...The mission of the Engineering and Physics department at Johns Hopkins is to provide support to the Radiology and Radiological Science departments... ...and outpatient centers. As an Imaging Equipment Engineer II, you will: Perform installation, de-installation and...Full timeMonday to FridayShift workDay shift
- Bosch Building Technologies North America is seeking an experienced professional to design and review security system functionality, including access control and IP video, for integrated low voltage projects in Minnesota. You will ensure proper operation, safety, and compliance...
- Bracco Medical Technologies in Eden Prairie, Minnesota, is looking for a Design Assurance Engineer II to support design assurance activities for medical products. The role demands a strong background in quality engineering, particularly in the medical device industry. Key...
- Abbott in Plymouth, MN seeks a Design Assurance Engineer II to lead development projects and ensure design verification/validation for medical devices. The role requires coordinating cross‑functional teams and aligning outputs to regulatory expectations and production controls...
- ...and impact, working closely with clients who are deeply invested in their mission and communities. Architect / Architectural Designer II Posted Wednesday, September 2 Organization Station 19 Architects Location Minneapolis Salary / Compensation Transparency Law not...Remote workFlexible hours
- ...regulatory standards. Provide hands-on support for prototyping, pilot builds, process development, validation, transfer to production and... ...as required.Qualifications:Bachelor's/University degree in Engineering (Mechanical, Biomedical etc.) or related science/technical...Full time
- ...Process Engineer IIThe Process Engineer II (PE2) is responsible for executing process engineering activities for FQT's technologies. This role involves managing engineering tasks, with minimal supervision, from project conception through detailed engineering, commissioning...Full timeCasual workH1bImmediate startWorldwideVisa sponsorshipWork visaShift work
- ...Process Engineer IIThe Medtronic Energy and Component Center (MECC) in Brooklyn Center, MN designs, develops, and manufactures the energy... ...Medtronic businesses. MECC is looking to hire a Process Engineer II with equipment design and process validation experience to join...Work at officeLocal areaWorldwide
- ...Ensure optimal occupant comfort by continuously monitoring the building automation system, making appropriate system adjustments and... ...investigating all HVAC requests. If request is beyond the scope of the engineering or maintenance/housekeeping staffs, schedule appropriate...Full timeFor contractors
$92.4k - $127.5k
...communities. The Senior Regional Welding Engineer is responsible for standardizing,... ...welding standards.NDT certification (Level II or III in VT, PT, MT, UT, RT or equivalent... ...creating and delivering training programs and building technical capability.Experience in global...Full timeWork experience placementH1bWork at officeRemote workRelocation- .../OQ/PQ). The candidate is expected to support documentation harmonization, validation execution, and contribute to manufacturing engineering initiatives during system integration. Roles And Responsibilities Review documentation of procedures and ensure proper execution...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Building Engineer II. Be the first to apply!


