CNC Vertical Turret Lathe Machinist

Billet Industries

Main Job Duties
Setup and operate CNC Vertical Turret Lathe to fabricate metallic and nonmetallic parts by performing the following duties.

Key Objectives

Setup and operate VTLs - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc.
Manufacture components within the allotted time estimates provided on job travelers.
Ensure customer satisfaction with products and service.
Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools.
Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics.

Essential Job Functions

Setup, and operate VTLs with minimal supervision.
Must have Proficient Knowledge of G Code with the ability to perform manual CNC program edits as required to complete job work scope.
Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5.
Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002" over 55" diameter.
Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints.
Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area.
Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment.
Document daily activities to assure performance in accordance with job standards.
Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required.
Willing to work overtime when needed to satisfy customer requirements.
Employee may be required to operate forklifts and have the ability to safely rig and handle products up to 4 tons.
Must be able to stand, twist, bend, and repeatedly lift up to 50 lbs. Must be able to use hands and vision to complete coordinated actions.
Work practices to be in accordance with Company Policies including, but not limited to attendance, confidentiality, safety and substance abuse.
The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law.

Additional Qualifications
The following skills and qualifications are a plus but are not required for this position.

Mastercam Programming experience.
Ability to setup & operate Horizontal Boring Mills, and/or Horizontal/Vertical Machine Centers.
Experience working in an ISO-9001 or AS9100 Quality Environment.

Apply

Vacancy posted 3 days ago

Similar jobs that could be interesting for youBased on the CNC Vertical Turret Lathe Machinist in York, PA vacancy

Manual Machinist - Lathe & Mill
...Job Description Job Description Manual Machinist – Lathe & Mill – York, PA DIRECT HIRE | PERMANENT POSITION | FULL-TIME THIS IS... ...accurate parts, and solve machining problems. This is NOT a CNC-only position. Candidates must have actual hands-on manual...
CNC
Hourly pay
Permanent employment
Full time
Contract work
Part time
Murphy's Family Staffing
York, PA
12 days ago
Manufacturing Maintenance Machinist - SIGN ON BONUS
...Machinist Maintenance Technician IIIAt Campbell Chain, a proud part of Hillman, we manufacture... ...components. You will operate manual and CNC machine tools, fabricate replacement... ...fixtures, and equipment parts.Operate manual lathes, mills, grinders, drill presses, and CNC...
CNC
Apprenticeship
Relocation package
The Hillman Group
York, PA
22 hours ago
URGENTLY HIRING SKILLED MACHINISTS - ORLANDO, FL
$24.5 - $46.75 per hour
...Qualified Candidates DMC is growing and we're hiring skilled CNC Machinists for immediate 2nd Shift openings in Orlando, Florida.... ...Key Responsibilities Set up, program, and operate CNC mills, lathes, turning centers, grinders, and other machining equipment Troubleshoot...
CNC
Hourly pay
Temporary work
Immediate start
Worldwide
Relocation package
Afternoon shift
Daniels Manufacturing Corporation
York, PA
2 days ago
CNC Machinist (Mills & Lathes)
$20 - $30 per hour
...This Is a Great Opportunity Put your CNC machining skills to work on diverse, hands... ...your skills. Work with CNC mills and lathes while expanding your experience with advanced... ...is a full-time, on-site opportunity for machinists who enjoy hands-on work, collaborating...
CNC
Hourly pay
Full time
Orion Placement
York, PA
18 days ago
Machinist Journeyman, 2nd Shift
$43.31 per hour
...Job Description Job Description We are seeking a CNC Machinist (Journeyman)to join our federal team at our York, PA location. We're keeping the Navy cool. Literally. Our team at the Grantley Plant custom designs, develops and manufactures complex chilled water HVAC...
CNC
Hourly pay
Monday to Friday
Shift work
Afternoon shift
Johnson Controls Federal Systems
York, PA
22 days ago
Full-time 2nd Shift Manual Machinist I
$28.75 - $43.7 per hour
...Full-Time 2nd Shift Manual Machinist IPay: $28.75-43.70 per hour, includes a 15% shift differential for 2nd shiftSchedule: Monday... ...critical dimensions, and then properly set up and operate engine lathes, vertical lathes, and both vertical and horizontal mills accordingly....
Hourly pay
Full time
Local area
Monday to Friday
Shift work
Weekend work
Afternoon shift
Motor Technology Inc
York, PA
22 hours ago
Full-time 2nd Shift Manual Machinist I
$28.75 - $43.7 per hour
...Description Job Description Full-time 2nd Shift Manual Machinist I Pay: $28.75-43.70 per hour, includes a 15% shift differential... ...dimensions, and then properly set up and operate engine lathes, vertical lathes, and both vertical and horizontal mills accordingly....
Hourly pay
Full time
Local area
Monday to Friday
Shift work
Weekend work
Afternoon shift
Motor Technology, Inc
York, PA
3 days ago
CNC Machinist - 3rd Shift
$25 - $35 per hour
...Job Description Job Description CNC Machinist 3rd Shift Pay: $25-35/hr. (Depending on experience level and/or Journeyman... ...work environment Perform setups on CNC machines (Lathes, Horizontal Mills, Vertical Mills, and 5 axis Mills) safely and productively Layout...
CNC
Immediate start
Shift work
Night shift
Cannonball Recruiting LLC
York, PA
1 day ago
Machinist
...Job Description Job Description Machinist II – Day Shift KRB Machinery – Wrightsville, PA Join an employee-owned company where... ...area What We’re Looking For: ~2+ years machining experience (CNC or manual) ~ Ability to run multiple machines while maintaining...
CNC
Day shift
KRB Machinery
Wrightsville, PA
9 days ago
CNC Machinist 1st shift weekend shift
$24 - $28 per hour
...Job Description Job Description CNC Machinist (Weekends) Pay: ~$24-$28/hr. (Work 36, paid for 40) Shift: 5am... ...Friday-Sunday Required Skills / Experience: CNC Vertical/Horizontal Mill and/or Lathe operating experience (5 Years Preferred) Use of Measurement...
CNC
Shift work
Weekend work
Day shift
Cannonball Recruiting LLC
York, PA
1 day ago
Regional Technical Manager
...industrial supply or metalworking sector. Technical expertise in CNC engineering, manufacturing processes, and cutting tools. Strong... ...opportunity here to be your best self.Whether your career path is vertical or squiggly we’d love to watch you grow and reach your full...
CNC
Full time
MSC Industrial Direct
York, PA
4 days ago
Machinist and Fabrication Technician
$22.5 - $35 per hour
...Machinist/Hydraulic Cylinder TechnicianCategory: Light IndustrialLocation: Hallam, PA 17406Pay: $22.50 HourlyStatus: OpenDescriptionMachinist... ...QualificationsPrevious experience with using a manual lathe & end mill is requiredHydraulic experience with repair/ troubleshooting...
Monday to Friday
Shift work
Elwood Staffing
York, PA
3 days ago
Tool & Die Maker - Molding
..., dies, jigs, fixtures, and tooling components using manual and CNC equipment, ensuring adherence to tight tolerances. Read and interpret... ...build and repair complex molding tools. Set up and operate lathes, mills, grinders, and other machining equipment to produce high-...
CNC
Apprenticeship
New Concept Technology Inc.
Emigsville, PA
5 days ago
Manual Machinist - 1st Shift
$30 - $32 per hour
...Job Description Job Description Manual Machinist - 1st Shift Pay: $30-32/hr. Shift: 7am-3pm (Mon-Fri) Job Summary: We are looking for a skilled Manual Engine Lathe Machinist to join our hydraulics manufacturing team. Qualifications & Skills: ~3+...
Flexible hours
Shift work
Day shift
Cannonball Recruiting LLC
York, PA
1 day ago
CNC Machinist - 2nd Shift
$36.88 per hour
...Job Description Job Description Machinist Pay: Journeyman: $36.88 Non-Journeyman: $32.07 2nd Shift (3:30 PM – 11:55 PM) Requirements: ~3+ years CNC Machining Experience ~ Able to run vertical and horizonal CNC Mills ~ Must be able to read blueprints...
CNC
Flexible hours
Afternoon shift
Cannonball Recruiting LLC
York, PA
10 days ago
Swiss Set-Up Operator
...Job Description Job Description Are you looking for a CNC Swiss Operator position with great benefits and pay? Looking for a challenge... ...your day to day will look like; Setup and operate CNC Swiss Lathe machines. Operations consists of Putting tools in machine,...
CNC
The Manufacturers' Association
York, PA
6 days ago
CNC Programmers, 1st and 2nd shifts
$34.87 per hour
...CNC Machinist Pay: $34.87 per hour Schedule: Train on 1st Shift, then move to 2nd Shift: 3:30 PM 11:55 PM Overtime: Frequently Available... ...required. Experience operating and setting up CNC mills and/or lathes. Strong ability to read and interpret blueprints, technical drawings...
CNC
Hourly pay
Local area
Flexible hours
Shift work
Day shift
Afternoon shift
Staffmark
York, PA
22 hours ago
Industrial Regional Sales Manager
...experience is highly desirable, with adjacent experience in automation, CNC equipment, mechanical systems, piping, or similar technical... ...proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn...
CNC
Base plus commission
For contractors
Remote work
Jobrapido
York, PA
1 day ago
Journeyman CNC Machinist (2nd Shift)
$39.09 per hour
...Job Description Job Description Journeyman CNC Machinist (2nd Shift) Pay Rate: $39.09/hour + $2.00/hour shift differential... ...safety requirements. Job Responsibilities Operate vertical and horizontal CNC mills to machine parts to specification...
CNC
Monday to Friday
Flexible hours
Shift work
Afternoon shift
Cannonball Recruiting LLC
York, PA
10 days ago
CNC Machinist
$20 - $30 per hour
...Job Description Job Description CNC Machinist/CNC Machine Operator Pay: $20-30/hr+ (depending on experience level) Description:... ...discrepancies or issues to management. Machinery Operated: CNC Lathe (5+ axis) CNC Mill (5+ axis VMC) CNC Lathe (204 axis)...
CNC
Shift work
Cannonball Recruiting LLC
York, PA
10 days ago
CNC Programmers - Manufacturing
$18 - $25 per hour
CNC Machinist - Earn $18-$25/hr in York Haven, PA + 1st Shift, Custom Projects & Long-Term Growth! Pay Rate: $18-$25/hr (based... ...variety of CNC machines, including Okuma Horizontal Mills, Vertical Mills, and Turn Lathes. Read work instructions, perform machine setups, and...
CNC
Temporary work
Local area
Immediate start
Monday to Friday
Day shift
PeopleShare by PROMAN
York Haven, PA
4 days ago
CNC Operator
$25 - $35 per hour
...Job Description Job Description Hiring Now: CNC Operator– $25–$35/hr – York and Hanover, PA – Modern Shop, Steady Hours & Skilled... ...: ASAP Responsibilities - Set up and operate Mazak CNC lathes to produce precision components across a wide range of materials...
CNC
Permanent employment
Temporary work
Work at office
Local area
Immediate start
Weekend work
Day shift
Afternoon shift
PeopleShare
York, PA
25 days ago
Machinist II (1st & 2nd Shift-D)
...metal part to be produced. Determines the optimal tool path for fabricating the part by selecting appropriate machine tools (e.g., lathes, drill presses, milling machines, grinders, boring machines, etc.) and specifying the sequence of tool operations. Manually sets up...
Shift work
Day shift
Afternoon shift
General Dynamics
Red Lion, PA
3 days ago
Requisition Machinist II (multiple shifts available) $$potential sign-on bonus $$
...shop mathematics, metal properties, layout, and machining procedures.?? Machines parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders.?? Measures, examines, and tests completed units in order to detect defects and ensure...
Contract work
Relocation package
Shift work
Weekend work
Weekday work
General Dynamics
Red Lion, PA
22 hours ago
CNC Machine Operator (1st)
$20 - $23 per hour
...CNC Machine OperatorPay: $20-23/hr.Shift: Mon-Fri (6am to 3:30pm)Description:The CNC Machine Operator will be running the CNC burn table on the 1st shift in a metal manufacturing environment.Requirements:Prior blueprint experiencePrior machine operating experienceJob Responsibilities...
CNC
Shift work
Day shift
Cannonball Recruiting LLC
York, PA
4 days ago
Maintenance Machinist
Hot Job Focus on the core content of the job post, removing all extra metadata from the top of the page. Remove any extra mentions of description, job details, job post, etc. At the top of the page, remove obvious/redundant headers and dive into the important content. ...
Mauser Packaging Solutions
York, PA
2 days ago
Field Services Engineer
$90k
...Field Service Engineer (CNC/Machine tools) Home based with travel $90,000 + $120,000 + Overtime (OTE $140,000 + $200,000) + $70 per diem + Company vehicle + Manufacturers Training + Progression + Benefits + PTO Are you a CNC maintenance or Service Technician...
CNC
Daily paid
Monday to Friday
Rise Technical
York, PA
22 hours ago
CNC Machinist
...Job Description Job Description Overview We are seeking a skilled CNC Machinist to join our dynamic team in York, PA, 17402. As a CNC Machinist, you will play a crucial role in our manufacturing process, ensuring precision and quality in the production of parts and...
CNC
Flinchbaugh Engineering
York, PA
7 days ago
Material Coordinator, 1st shift
$23.19 - $27.39 per hour
...deal with problems involving several concrete variables in standardized situations. \n \n COMPUTER SKILLS \n \n Knowledge of CNC software and the ability to use a PC. The need for these skills varies depending on the machine. \n CERTIFICATES & LICENSES\n \...
CNC
Hourly pay
Shift work
Day shift
Johnson Controls
York, PA
19 days ago
CNC Machine Operator (1st)
$20 - $23 per hour
...Job Description Job Description CNC Machine Operator Pay: $20-23/hr. Shift: Mon-Fri (6am to 3:30pm) Description: ~ The CNC Machine Operator will be running the the CNC burn table on the 1st shift in a metal manufacturing environment. Requirements:...
CNC
Weekly pay
Shift work
Day shift
Cannonball Recruiting LLC
York, PA
1 day ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Vertical Turret Lathe Machinist. Be the first to apply!