Saw Operator
Leggett & Platt
Reports To: Sample Department Supervisor Job Summary: This position is responsible for the following:
Qualifications: Must haves for this position:
- Operate cutting equipment: Band saw, rotating knife saw and die press
- Cut material to standard sample size; adjust as required
- Maintain cut list schedule to sample inventory stock
- Pull roll stock per the schedule
- Load and Unload rolls as needed
- Maintain organization of roll stock and shelves
- Bagging cut samples properly following quality checks and requirements
- Stocking sample inventory
Qualifications: Must haves for this position:
- Be able to read, write, and count correctly
- Basic Math, English, use a tape measure, weight scale, and micrometer
- Be able to follow both written and verbal work instruction
- Have good communication skills
- Be detail oriented
- Be able to change tasks, prioritize, and re-prioritize frequently and able to follow-up on work tasks as needed in a timely manner
- Be able to bend, twist, push, pull, and lift (Up to 50lbs; anything heavier than that should be a two-person lift)
- Wear proper Personal Protection Equipment (PPE) when applicable
- Must work in an uncontrolled temperature environment
- Operate a pallet jack
- Cut material into samples to keep shelves stocked
- Responsible for communicating and assisting in the preventive and predictive maintenance of saw equipment
- Perform other job functions as directed by supervisor
- Quality check
- Assist Sample Clerk’s when needed
- Adhere to material cut standards
- Review material after first cuts to inspect for quality of material
- Must commit to creating a culture where partners are protecting partners- “You See Something, Say Something!”
- Must comply with all company policies and procedures listed in the Leggett & Platt Employee Handbook
- Report all incidents, accidents, and near-misses to your supervisor immediately
- Assist in recognizing, responding, reporting, and eliminating hazards and assuring safety compliance
- Must participate in:
- On-the- Job (OJT) Training documentation
- Use of CAR/PARs (Corrective / Preventative Actions)
- Incident/Accident/Near-Miss Investigations to determine root cause
- Use of required PPE
- Participation in training events
- Good housekeeping in the work area and entire company grounds
- Must understand and commit to:
- No personal cell phone use on the production floor; Active cell phone use does not go beyond breaks and lunches
- No horseplay, yelling, or violence in the workplace
- No eating or open drinks are allowed on the production floor
- Commit to environmental preservation through:
- Stormwater Pollution Prevention
- Participation in recycling initiatives
- Proper use of waste containers
- Participation in training events
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Saw Operator in Fort Worth, TX vacancy
- ...Job TitleThis position is responsible for the following:Operate cutting equipment: Band saw, rotating knife saw and die pressCut material to standard sample size; adjust as requiredMaintain cut list schedule to sample inventory stockPull roll stock per the scheduleLoad...Suggested
Leggett & Platt
Fort Worth, TX2 days ago - ...Overview Company Name: Kreher Steel, A Tube Supply Company Position: Saw Operator Position Type : Full-Time Location: Ft. Worth, TX We are seeking a Saw Operator! Weekly pay. Overtime available. Job stability. Benefits: ~ Profit...SuggestedWeekly payFull time
Triple-S Steel
Fort Worth, TX14 hours ago - ...sealant technologies. Oldcastle Infrastructure - Built For Life from Oldcastle Infrastructure on Vimeo . Job Summary The Saw Operator retrieves, inspects, and cuts products to customer supplied specifications. Job Responsibilities Operates saw Inspects...SuggestedFor contractorsLocal area
Oldcastle Infrastructure
Fort Worth, TX3 days ago - Oldcastle Infrastructure in Fort Worth, TX is seeking a Saw Operator to retrieve, inspect, and cut products to customer specifications. You will operate the saw, follow operator instructions, and help maintain a clean, organized work area. Preferred candidates have manufacturing...Suggested
- Oldcastle Infrastructure in Fort Worth is seeking a Saw Operator to retrieve, inspect, and cut products to customer specifications. You will operate the saw, keep the workspace clean, and assist in maintaining production records. This role prefers prior manufacturing experience...Suggested
- ...Platt in Fort Worth, TX is seeking a production support role to operate cutting equipment and maintain sample inventories. You will cut... ..., keep shelves stocked, and assist in preventive maintenance of saw equipment while performing quality checks. The role requires reading...
- Leggett Dynamics in Fort Worth, TX is seeking a production sampler/operator to support sample preparation and stock management. You will cut... ...samples, keep shelves stocked, and assist in maintenance of saw equipment. The role requires reading, basic math, good communication...
$15 - $18 per hour
Responsibilities Operate band saw in a safe manner to cut materials to specified dimensions Accurately read tape measure and blueprints Provide routine maintenance for band saw and other cutting equipment Willing to work overtime to meet production needs Safety oriented...Monday to Friday- General Description: The Concrete Carpenter will perform a variety of carpentry tasks. This individual will work with others and will be under the direction of a Foreman for the successful completion of each building. This person works very diligently with their hands ...Weekend work
B & B CONCRETE CO. INC
Fort Worth, TX4 days ago - ...varies by workflow and field activity. Walking - The person in this position needs to frequently move about the jobsite. Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. The person in this position frequently...Full timeWork at officeLocal area
Hensel Phelps
Fort Worth, TX14 hours ago - At Keeley Companies, we believe in empowering our people and fulfilling career aspirations. Keeley is a career destination with countless opportunities for advancement, and a world-class family culture that is centered around creating the best possible environment for our...Local area
Keeley Construction, Inc.
Fort Worth, TX4 days ago $15 - $16 per hour
Custom Framer Hobby Lobby is seeking organized, customer service oriented people to join our team as a Framer. We need enthusiastic individuals who are motivated, responsible, and have the drive to make the most of a career with us. We are an exciting, ever changing, growing...Hourly payFull timePart timeSeasonal workFlexible hoursHobby Lobby
Fort Worth, TX4 days ago- ...to find what they're looking for. Provide a safe, clean and clutter-free environment. Major Activities Adhere to Standard Operating Procedures (SOP's) and Company programs to ensure compliance to applicable laws and requirements; execute Company policies and...Part timeLocal areaFlexible hoursNight shiftEarly shift
Michael's Inc
Fort Worth, TX2 days ago - ...experience.Must provide your own hand tools, such as hammer, pouch, level, 8" crescent wrench, and tape measure.Basic knowledge of operating hand and power tools used in construction.Ability to read and understand construction plans, sketches, and blueprints.Ability to...Temporary workRelocationNight shiftWeekend work
Zachry Construction
Fort Worth, TX14 hours ago - Job Description Job Description Commercial Concrete Carpenter General Description: Responsible for performing a variety of carpentry tasks associated with prepping, pouring, placing, and finishing of concrete. Tasks include erecting and setting forms for ...
B&B Concrete
Fort Worth, TX19 days ago - ...Must be team oriented. Be willing to learn the asset recovery services field with a positive attitude. Be able to maintain, operate and keep the assigned vehicle clean. Obtain/retain at all times a valid DOT medical card. Be computer literate. Be able to...Full timeShift workNight shiftDay shift
Pegasus Recovery Solutions
Fort Worth, TX8 days ago - Ace Handyman Services Fort Worth SW is seeking skilled Carpenters for flexible full-time or part-time work in the Fort Worth area. You will travel to client sites using your own vehicle and provide quality craftsmanship across multiple trades including carpentry, tiling...Full timePart timeFlexible hours
- ...trailers. The role requires a high school diploma and previous warehouse experience, with certification in forklift and pallet jack operations. The ideal candidate will ensure adherence to safety and productivity standards while working in a potentially noisy and extreme...
$20 - $28 per hour
...Job Description Job Description CDL / Hydro Vac Operator – Support Underground Field Operations Across Texas Job Overview Company: BCAC Underground Salary/Pay Rate: $20.00–$28.00+ per hour, depending on experience, plus Performance Bonus Location: Haltom...Hourly payWeekly payDaily paidFull timeLocal areaMonday to FridayWeekend workBCAC Underground
Haltom City, TX5 days ago- ...Position Summary The Plasma Operator is responsible for safely operating CNCplasma cutting equipment to process steel plate and structural materialsaccording to work orders, blueprints, and customer specifications. This roleplays a key part in supporting Willbanks...Hourly payFull timeShift work
Willbanks Metals
Fort Worth, TX2 days ago - ...Metroplex. Must be familiar with Forbes, AAA, and luxury hotel standards. The ability to communicate effectively and graciously. Operate with passion, respect, integrity, dedication, and empowerment to all internal and external guests. Some experience in customer...Local areaFlexible hoursWeekend workAfternoon shift
Hotel Drover
Fort Worth, TX14 hours ago - ...Last year our HCA Healthcare colleagues invested over 156,000 hours volunteering in our communities. As a(an) PBX Operator with Medical City Alliance you can be a part of an organization that is devoted to giving back! Job Summary and Qualifications As a PBX Operator...Temporary workWork at officeFlexible hours
HCA Mission Hospital - Memorial Campus
Fort Worth, TX1 day ago $18 per hour
...Inserter OperatorLocation: Fort Worth, TXPay Rate: $18.00 per hourSchedule: Sunday - Thursday | 10:00 PM - 6:00 AMBuilt to Run. Paid to Operate. If you've got the skills to run machines and the grit to keep them humming, this Inserter Operator job is built for you. Reliable...Local areaImmediate startStaffmark
Fort Worth, TX4 days ago- ...application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Skid Steer Operator Regular Full-Time Fort Worth, TX, US About Us: Liberty Tire Recycling is a high-growth company and the premier provider of tire...Full timeLocal areaAll shiftsFlexible hoursShift workNight shiftDay shift
Liberty Tire Recycling
Fort Worth, TX4 days ago $18 per hour
...Now Hiring Inserter Operator Location: Fort Worth, TX Pay Rate: $18.00 per hour Schedule: Sunday - Thursday | 10:00 PM - 6:00 AM Built to Run. Paid to Operate. If you've got the skills to run machines and the grit to keep them humming, this Inserter...Hourly payWeekly payFor contractorsLocal areaImmediate startFlexible hoursShift workDay shiftStaffmark Group
Fort Worth, TX1 day ago$30 - $35 per hour
...Job Description Job Description Class A CDL Driver - Heavy Equipment Operator At Skidabrader we utilize our world class specialized pavement texturing equipment to improve the safety and skid resistance of North America's highways, bridges, and airport runways...Hourly payDaily paidFull timeSkidabrader Group LLC
Fort Worth, TX21 days ago- ...assisting mechanics, or other personnel with various labor-based tasks, and completing other daily assignments that support the branch operations. Job Duties: Always Maintain a safe work environment; obey safety rules; and wear required safety PPE Detailing inside...Monday to Friday
Custom Truck One Source
Fort Worth, TX14 hours ago $17 - $18 per hour
...Job Description Job Description Insert Operator – 2nd Shift Location: Dallas, TX Pay Rate: $17.00–$18.00 per hour Job Type: Full-Time Shift: 2nd Shift Schedule: Monday–Friday, 2:00 PM–10:00 PM Overtime: Must be available to work overtime and...Hourly payFull timeMonday to FridayShift workAfternoon shiftSnelling Staffing DFW
Fort Worth, TX3 days ago- ...Alcon Supply Chain Operator I At Alcon, we're passionate about enhancing sight and helping people see brilliantly. With more than 25,000 associates, we innovate fearlessly, champion progress, and act swiftly to impact global eye health. We foster an inclusive culture...Hourly payVisa sponsorshipRelocation packageFlexible hoursAfternoon shift
$17 - $30 per hour
...Operator Landmarc - Fort Worth TX - Fort Worth, TX 76109 Overview Position Type Full Time Category Construction Description Operator Who We Are Landmarc Environmental Systems, LLC (Landmarc) was conceived by a few environmental professionals, very...Hourly payDaily paidFull timeFor contractorsLong distanceFlexible hoursWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Saw Operator. Be the first to apply!
