Repair and Tool Technician
$19.5 per hourThe Home Depot
Repair and Tool Technician | Home Depot
Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.
City: BLAINE
State: MN
Auto req ID_BR: 74339BR
Job Type: Store Repair and Tool Technician
Auto req ID: 200080042
Pay Range: $19.50
- Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained....Suggested
- ...Weekly pay Duties of the CNC operator and programmer: Repair aluminum and steel cores using CNC lathes Use conversational... ...programming Interpret drawings and blueprints to select tooling Determine cut positions and optimal speed/feed ratios Setup...SuggestedWeekly payTemporary workMonday to Friday
$20 - $38 per hour
...PM – 2:00 AM (+10% diff ) ~ Weekend Shift: Fri–Sun | 5:00 AM – 5:30 PM (+25% diff ) ???? What You’ll Do Perform CNC setups, tool changes, offsets, and operation Run parts to tight tolerances and maintain quality standards Read blueprints, GD&T, and...SuggestedShift workWeekend workDay shiftAfternoon shift$25 - $30 per hour
...and K16 machines. You will make intermediate edits and work off various blueprints, handling the full process including operation, tooling changes, edits, loading programs, and troubleshooting. Additionally, you will maintain quality standards through in-process inspection...SuggestedWeekly payContract workTemporary workWork at office$66.56k - $93.6k
...interpret complex blueprints, technical drawings, and engineering models. Quality Inspection: Inspect parts using precision measuring tools to ensure they meet exact customer specifications. Safety & Maintenance: Follow all safety procedures, maintain equipment, and...SuggestedTemporary workShift workNight shiftWeekend workDay shiftAfternoon shift$1,000 - $5,000 per month
...Perform quality inspections on completed parts Conduct preventative maintenance to ensure consistent machine performance Complete tool changes and maintain tooling as required Maintain production standards while ensuring compliance with quality requirements...Temporary workFor contractorsRelocation packageShift workDay shift$37.44k - $52k
...from Scratch: Set up and operate CNC machines (Mills, Lathes, Swiss, and Mill-Turn) by following setup sheets, selecting correct tooling, and establishing accurate coordinates. Blueprint Interpretation: Read and accurately interpret blueprints and technical drawings...Full timeTemporary workAll shiftsShift workNight shiftWeekend workDay shiftAfternoon shift- ...edit CNC programs, detect errors, and adjust as needed. Adjust tools and replace them as necessary. Ensure compliance with... ...instruments. Assist in process development with engineers, technicians, and supervisors. Perform pre-production and program validation...Local areaFlexible hoursNight shiftWeekend workAfternoon shift
$23 - $45 per hour
...adjustments Knowledge of GD&T and blueprint reading Experience with Okuma or Mazak machinery (a plus) Experience with live tooling and multi-axis machining (a plus) High school diploma or equivalent Contact Information: To learn more about these CNC...Weekly payFull timeTemporary workShift workWeekend work$27 - $40 per hour
...axis milling machines (Hurco, Mazak, etc.) Manufacture parts using alloy steel, titanium, and exotic materials Utilize precision tools in a controlled inspection environment Ensure parts meet strict ISO quality standards and blueprints Optimize machine speeds...Weekly payFlexible hoursDay shift$30 - $40 per hour
...of the CNC lathe setup machinist: Set up and operate CNC lathes Read and interpret blueprints and specifications Perform tool changes and make adjustments as needed Inspect finished parts with precision measuring instruments Troubleshoot machining...Day shiftAfternoon shift$30 - $40 per hour
Cnc Mill Machinist Take your machining career to the next level with this CNC mill machinist position! Join a well-established company with over 40 years in the industry, offering a stable work environment, modern equipment, and opportunities for growth. Location: Blaine...$75k - $112k
...production. In addition, provides input into quotes and quote reviews regarding projected machine cycle times, processes, work holding, and tooling. Requirements Job Duties and Responsibilities (Essential Functions) Develop, create, and maintain CNC and control...Permanent employmentContract workTemporary workWork experience placementLocal area$62.4k - $93k
...CNC Swiss machines quickly, accurately, and efficiently. Handle the full machining process, including machine operation, setups, tooling changes, program editing, program loading, and troubleshooting. Make program edits using GibbsCAM and ESPRIT software to...Weekly payPermanent employmentTemporary workWork at office- ...as well as 1-time single parts. We machine a wide variety of materials including plastics, aluminum, exotic super alloys, hardened tool steel and more. The work includes parts for a wide variety of industries. Some of the job duties and responsibilities: - Program...Temporary workShift work
$17.6 - $29.9 per hour
...blueprints, inspection instructions) to ensure accurate setup and sequencing Perform basic inspections using standard measuring tools to verify part quality Deburr and perform surface finishing operations such as sanding Monitor machines and parts during...Hourly pay$30 - $40 per hour
Swiss CNC Machinist Manufacturing Lino Lakes, Minnesota, US ~ Added - 01/06/2026 Pay Rate Low: 62000 | Pay Rate High: 83000 With over 30 years at the forefront of advanced machining, we specialize in Design for Manufacturability and Development services for...Temporary workDay shiftAfternoon shift$30 - $40 per hour
...with Doosan and DMG Mori machine operation ~ Ability to read and interpret advanced blueprints ~ Experience with manual inspection tools and techniques Contact Information: Take your machining career to the next level! To learn more about this CNC lathe...Weekly payFull timeMonday to Friday$75 per hour
Randstad Staffing is hiring now for a Direct Hire CNC Mill Machinist to join our Aerospace/ Automotive manufacturing client in Blaine, MN. If you have prior experience on Makino or Haas machinery, we invite you to apply today! Location: Blaine, MN Position: CNC Mill Machinist...Hourly payPermanent employmentFull timeTemporary workWork experience placementImmediate startShift work- CNC Lathe Machinist / Programmer Are you a skilled CNC machinist / programmer looking for a challenging opportunity to put your expertise to work on advanced machinery? Join us in producing high-quality, intricate parts made from aluminum, plastic, and steel, showcasing...
- ...Competitive pay based on experience and skill level Long-term opportunity with room to grow your machining skills Company invests in tooling and equipment to help you succeed Key Responsibilities Perform CNC machine setups and operate mills and/or lathes Read and...
$25 - $35 per hour
...edit CNC programs, detect errors and adjust as needed. Adjust tools and replace as necessary. Ensure written manufacturing and... ...calipers, OGP, etc. Assist in process development with engineers, technicians and supervisors. Be involved with and perform pre-production...Full timeTemporary workMonday to FridayAfternoon shift- ...independently with strong machining skills. Proficient with blueprint reading and GD&T familiarity. Skilled in using a variety of hand tools and inspection equipment Ability to make offsets and adjustments to ensure part quality Strong attention to detail and problem...Afternoon shift
- ...using CAM software (Mastercam, Esprit, GibbsCAM, etc.) • Interpret engineering drawings, blueprints, and GD&T specifications • Select tooling, feeds, speeds, and machining strategies for accuracy and efficiency • Prove out new programs and perform first article inspections...
$83k - $104k
...-axis machining equipment Develop, edit, and optimize CNC programs using GibbsCAM and ESPRIT software Perform machine setups, tool changes, offsets, and first-run validations Troubleshoot machining issues, tooling problems, and production inefficiencies Analyze...RelocationRelocation packageMonday to Friday- ...run CNC mill to machine parts to customer supplied print/specifications. Follows Gibbs CAM program for machining operations and tooling requirements. Make adjustments to program and machine as necessary in order to meet print. Inspect parts for conformance to specifications...Contract workDay shift
$25 per hour
...setup of CNC vertical mills Operate and monitor machines to ensure quality and efficiency Troubleshoot and adjust programs and tooling as needed Inspect finished products to meet quality standards Maintain a clean and organized workspace Requirements of the...$40 - $50 per hour
...Quarterly performance bonuses Key Responsibilities ~ Program, set up, and operate complex multi-axis CNC machines ~ Optimize tooling, speeds/feeds, and machining strategies ~ Troubleshoot and drive continuous improvement initiatives ~ Mentor and train...Monday to Friday$75 per hour
Randstad Staffing is hiring now for a Direct Hire CNC Lathe Machinist to join our Aerospace/ Automotive manufacturing client in Blaine, MN. Location: Blaine, MN Position: CNC Lathe Machinist Shift: 1st Schedule: Monday to Thursday + OT on Fridays Hours: 6:00 AM to 4:30 ...Hourly payPermanent employmentFull timeTemporary workWork experience placementImmediate startShift work$18 - $19 per hour
...Full-Time Tire Technician $18-$19/hour At Discount Tire, we change more than tires. We make dreams come true. As a Full-Time Tire... ...Work Includes Busting tires: Install, rotate, balance, repair, and clean new tires and wheels Delighting customers: Providing...Weekly payFull timeTemporary workLocal areaFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- hospital maintenance mechanic Blaine, MN
- maintenance technician Blaine, MN
- hospital maintenance technician Blaine, MN
- hotel maintenance technician Blaine, MN
- preventive maintenance technician Blaine, MN
- data center maintenance technician Blaine, MN
- repair technician Blaine, MN
- maintenance mechanic Blaine, MN
- pool repair technician Blaine, MN
- skilled maintenance technician Blaine, MN


