Optical Fabrication & Polishing Technician III
$28 - $38 per hourBond Optics
Job Description
Job Description
Senior Optical Fabrication & Polishing Technician III
Bond Optics – Lebanon, NH
Full-Time | 1st Shift (Mon–Fri, 7:00 AM–3:30 PM)
Position Summary
Bond Optics is seeking a highly experienced Senior Optical Fabrication & Polishing Technician III to lead complex optical fabrication work and support process excellence across the shop floor.
This role is for a senior technician who can run difficult jobs including tight-tolerance work on large apertures, exotic materials, and multi-element assemblies mentor others, improve process repeatability, and partner with engineering and quality to drive yield, throughput, and consistency.
Essential Responsibilities
- Independently set up and run complex or high-value optical fabrication jobs with minimal supervision, including tight-tolerance work on challenging substrates and geometries.
- Operate and optimize conventional fabrication processes including grinding, lapping, polishing, beveling/chamfering, and edge finishing across a range of optical materials (glass, crystalline, IR-transmitting, and specialty substrates).
- Work from optical drawings, travelers, process routings, and specifications to deliver parts to tight requirements.
- Perform advanced in-process and final inspection using shop metrology and optical inspection tools including:
- Interferometers (Zygo or equivalent) for flatness, transmitted wavefront, and surface figure
- Autocollimators for wedge and angle verification
- Micrometers, calipers, and electronic/dial indicators
- Microscopes and visual inspection tools for cosmetic evaluation per applicable specs
- Surface profilers or other metrology equipment as required
- Drive process control for critical features including thickness/parallelism, wedge/angle, flatness, edge condition, and cosmetics.
- Troubleshoot process and equipment issues; identify root causes and implement corrective actions in coordination with engineering and quality.
- Mentor and train Technician I and II personnel on setup standards, workmanship expectations, safe handling, documentation/traceability, and quality acceptance criteria.
- Support development and improvement of work instructions, process documentation, and standard methods.
- Lead by example in safety, cleanliness, organization, and quality discipline.
- Support production planning and priority execution by coordinating with supervisors and cross-functional teams.
- Contribute to continuous improvement initiatives to improve yield, cycle time, and repeatability.
Qualifications
Required:
- High school diploma or equivalent (technical training preferred).
- 8+ years of hands-on optical fabrication/polishing experience (or equivalent depth in precision optics manufacturing).
- Strong proficiency in conventional polishing/grinding/lapping processes.
- Strong ability to read and interpret optical drawings, specifications, and travelers.
- Proficient shop math skills including algebra, geometry, and trigonometry as applied to optical fabrication (wedge calculations, angle work, tolerance analysis).
- Demonstrated experience with precision inspection and process control.
- Strong troubleshooting, problem-solving, and mentoring ability.
- Excellent documentation habits and communication skills.
Preferred:
- Strong experience with continuous polishing, spindle polishing, and double-sided polishing/grinding equipment.
- Experience with interferometers (Zygo or equivalent), autocollimators, electronic indicators, surface profilers, and microscope inspection.
- Experience supporting process improvements or training programs.
- Experience in aerospace, defense, semiconductor, or other high-spec manufacturing environments.
- Familiarity with military optical specifications such as MIL-PRF-13830B.
- Familiarity with shop-floor software, ERP/MRP systems, and production data systems.
What You Can Expect
- A shop-floor leadership role where your expertise directly impacts product quality and team capability.
- The opportunity to work on complex, high-value optics for demanding defense and aerospace programs.
- Collaboration with engineering and quality teams on process development and continuous improvement.
- A company that recognizes and relies on senior technical talent as the backbone of its manufacturing operations.
Physical / Work Environment
- Standing and active machine/bench work for extended periods.
- Must be able to regularly lift and carry up to 25 lbs and occasionally up to 50 lbs.
- Handling precision optics, tooling, and fixtures requiring manual dexterity and careful manipulation.
- Close visual inspection work and metrology use.
- Specific vision abilities required include close vision, color vision, depth perception, and the ability to adjust focus.
- Work is performed in a controlled manufacturing environment; noise level is generally moderate.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.
Compensation & Benefits
Compensation range: $28.00–$38.00/hour, depending on experience. Bond Optics offers a comprehensive benefits package including:
- Paid vacation and holidays
- Health, dental, and vision insurance
- 401(k) with employer matching
- Life insurance and short-term disability
- Day shift schedule, Monday through Friday
ITAR / Export Control Requirement
This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR). Accordingly, applicants must be U.S. Citizens, U.S. Permanent Residents (Green Card holders), or persons admitted as refugees or granted asylum status under 8 U.S.C. § 1157–1158, as required under 22 CFR § 120.15. Bond Optics is unable to sponsor work visas for this position.
Equal Employment Opportunity
Bond Optics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law.
Bond Optics will make reasonable accommodations for known physical or mental limitations of otherwise qualified applicants and employees with disabilities unless the accommodation would impose an undue hardship on the operation of the business. If you require an accommodation to apply for this position, please contact Human Resources.
- ...project in Lebanon, Indiana. This field-based role focuses on piping fabrication, welding, installation, testing, and turnover. This position... ...be provided through training and certification via FST’s Level III NDT certified trainer. Minimum 10 years of construction...SuggestedDaily paidFor contractorsFor subcontractorCasual work10 hours per weekShift work
- ...testing equipment, applying knowledge of mechanical, electrical and optical interrelations. Compiles and records test results. Usage of... .... Works closely with customers, engineers and senior technicians. Travel domestically and abroad – Extensive travel may be required...SuggestedWork at officeFlexible hours
- ...with a strong sense of community that values safety, customer satisfaction, training and development, and teamwork.As a Service Technician, you will be part of a team of passionate and professional individuals committed to customer service. We will help you jumpstart...SuggestedLocal areaImmediate start
- ...Ford Master TechnicianA Ford Master Technician performs advanced diagnostics and repairs on complex vehicle systems, mentors junior technicians, communicates with service advisors and customers, and stays updated on Ford training and certifications. Their primary responsibilities...Suggested
- ...community that values safety, customer satisfaction, training and development, and teamwork. Responsibilities: As a Service Technician, you will be part of a team of passionate and professional individuals committed to customer service. We will help you jumpstart...SuggestedLocal areaImmediate start
$25 - $40 per hour
...Job Description Flat Rate Compensation: Technicians can earn $25.00-40.00/hour in flat rate pay based upon experience. Our technicians are paid through a flat-rate, performance-based system designed to reward skill and efficiency. You earn a set amount for each eligible...Hourly payPrice workFull timePart timeLocal areaImmediate start- ...Tire TechnicianA Tire Technician is responsible for the dismounting, mounting and balancing of all tires sold. The Tire Technician will also be required to install any other products sold in his/her store. General job functions include driving a customers vehicle onto...Immediate start
- ...Alignment TechnicianAn Alignment Technician is responsible for the safe operation of aligning all the newly mounted tires and wheels on a customer's vehicle. You are not responsible for replacing any alignment parts but you are required to adjust them as a requirement...Immediate start
- ...ASE Technician The Flat Rate Technician (Tech) lives VIP's mission to EARN AUTOMOTIVE CUSTOMERS FOR LIFE by learning and living the VIP... ...ii. ASE Technician: Four of the A-Series ASE certifications iii. Master Technician: All eight A-Series A1 thru A8 f. Train,...Price workImmediate startShift work
$42k - $125k
...Flat Rate Technician Voted one of the best places to work in the 603, Nucar Ford of Lebanon, is currently looking for an experienced Flat Rate Technician to join our growing team. If you are an Automotive Technician that takes pride in doing your work right the...Bi-weekly payWeekly payPrice workFull timeTemporary workFlexible hoursShift work$26 - $32 per hour
...are currently seeking a highly motivated and driven Maintenance Technician for Real Property Management Beacon. This position is... ...opportunities listed on this website; (ii) any of the independent franchisees; and, (iii) any of the employees of the independent franchisees.Hourly payWork at officeRelocation package- ...activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on... ...electronics, circuitry, safety, digital theory, microcomputers, fiber optics, test equipment, and troubleshooting; strand training in either...ApprenticeshipLocal areaRotating shift
$60k - $100k
...structural repairs, including airbag replacement and minor mechanical work as neededMeet or exceed company performance standards for technician efficiency, cycle time, and quality to ensure on-time vehicle delivery and low return ratesCollaborate and communicate...- ...avionics systems for commercial, business, and military aircraft. We are looking for a highly skilled and motivated Manufacturing Technician to join our team in Lebanon, NH. If you're passionate about hands-on technical problem-solving and want to make a direct impact...Immediate start
$60k - $100k
...structural repairs, including airbag replacement and minor mechanical work as needed Meet or exceed company performance standards for technician efficiency, cycle time, and quality to ensure on-time vehicle delivery and low return rates Collaborate and communicate...$20 - $21 per hour
...Automotive Express Maintenance Technician White River Toyota is looking for an Automotive Express Maintenance Technician to join its busy service department. Prior experience is helpful, but not required, as we are willing to train the right candidate. Tools are provided...Full timeImmediate startMonday to FridayFlexible hoursShift work- ...Dreambound to find a Electrocardiogram program that will prepare you for this high-demand, entry-level role. What does an ECG / EKG Technician do? An ECG / EKG technician conducts diagnostic tests to measure and record the electrical activity of the heart, helping...Flexible hours
$100k - $160k
...Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro , a leading European and exotic auto repair shop, is looking for a Porsche...Hourly payRelocationRelocation package- ...Full Time Job Shift DayDescriptionNo experience needed! We are committed to training the right candidate for an entry-level tire technician position.We are looking for a candidate who is self-motivated and interested in beginning a career in the tire industry. In this...Hourly payFull timeWork at officeRelocation packageFlexible hoursShift work
$18 - $35 per hour
...for both experienced and entry level Telecommunications Cabling Technicians to add to our staff in the New Hampshire area.... ...responsible for:Installing category-rated copper cables and fiber optic structured cable distribution systemsPulling cable, fire stopping...- ...Endoscopy TechnicianCome work with our amazing Endoscopy team! The Endoscopy Technician plays an essential role in supporting the daily operations of a high-volume, fast-paced Endoscopy Unit. This position requires an energetic, dependable, detail-oriented, and highly...Flexible hours
- ...Transportation (VTrans) is seeking a Transportation Senior Operations Technician for a position with the White River Jct. team of District... ...One (1) year or more as a Transportation Operations Technician III.Special Requirements: A Class B Commercial Driver's License (...Work experience placementWork at officeFlexible hours
$20.25 - $24 per hour
...Technician TraineeA Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing...Weekly pay16 hoursApprenticeshipTraineeshipLocal area- ...without assistance Adherence to all Good Manufacturing Practices (GMP) Safety Standards Cleanroom: no hair products jewelry makeup nail polish perfume exposed piercings facial hair etc... allowed Some degree of PPE (Personal Protective Equipment) required (safety glasses...Full timeWork experience placementMonday to ThursdayShift workDay shift
$30 per hour
...Alliance Group Controls Technician Alliance Group is seeking full-time, experienced Controls Technicians in West Lebanon, NH to join our growing Building Automation/Controls team. This is a field-based position that is responsible for the installation, maintenance,...Full timeTemporary workSummer workLocal areaFlexible hours$3,195.2 per week
Radiologic Technologist - MRI Tech - Travel | Lebanon, New Hampshire Estimated Weekly Pay: $3195.20 Start Date: 12/07/2026 | Duration: 13 Weeks Shift: 5 x 8hr Days Job Details AHS Staffing is seeking a qualified Travel - Radiologic Technologist...Hourly payWeekly payDaily paidFlexible hoursShift work$30 - $40 per hour
...Controls Technician The Source and Recruit Company has been retained to assist Alliance Group Services, LLC in recruiting a Controls Technician for its West Lebanon, New Hampshire, operation. All inquiries and candidate conversations will be handled confidentially....Hourly payTemporary workWork at officeMonday to FridayFlexible hours$30 - $40 per hour
...sharing bonus The Source and Recruit Company has been retained to assist Alliance Group Services, LLC in recruiting a Controls Technician. All inquiries and candidate conversations will be handled confidentially. About Alliance Group Services Alliance Group...Hourly payFull timeMonday to Friday- ...Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...
$42 - $55 per hour
...Job Description Job Description As a Senior Service Technician at New England Air Systems, you’ll be the go-to expert for maintaining, troubleshooting, and servicing commercial and industrial HVAC and refrigeration systems. Your role is critical in keeping our clients...Hourly payTemporary workLocal areaFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Optical Fabrication & Polishing Technician III. Be the first to apply!
- fabrication technician Lebanon, NH
- quality control manufacturing Lebanon, NH
- quality manufacturing Lebanon, NH
- sales representative manufacturing Lebanon, NH
- electronic assembly manufacturing Lebanon, NH
- industrial manufacturing Lebanon, NH
- tool manufacturing Lebanon, NH
- manufacturing Lebanon, NH
- manufacturing scientist Lebanon, NH
- manufacturing positions Lebanon, NH



