Machine Operator (2nd Shift)
$18.47 - $21.47 per hourIndustrial Tectonics Bearings Corp.
Job Description
Job Description
Operates, in the manner instructed, any machine tool to machine parts from all materials on a production basis. The incumbent will change tools as required to maintain the set-up.
Assists in making a set-by by procuring proper tools from the Tool Crib; by making minor adjustments, by interpreting process sheets and by following clearly detailed instructions of the supervisor or other machinist designated by the supervisor.
Secures first article inspection to verify established set-up and continues to check parts for conformance to production standards during the course of the run. At the completion of the run, the incumbent obtains an inspection buy off before going to the next job.
Uses precision measuring devices such as micrometers, calipers and various gages to check work after each operation. Incumbent is responsible for plotting accurate charts as required by Quality Control.
Incumbent holds a floater position and moves from machine to machine as requested by supervisor.
Operator grinds high speed tools, such as tool bits and drills, using drill sharpening machine, etc., under the detailed instructions from his/her supervisor or other machinist designated by the supervisor.
Disclaimer:
The above statements are intended to describe the general nature and level of work being
performed by people assigned to this function. They are not intended to be an exhaustive list of all responsibilities, duties or skills required of incumbents.
MIN: $18.47 to $21.47
**Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors.
Equal Opportunity Employer
Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.
$23 - $30 per hour
...Friday 8:00am-4:00pm. You may also fax your resume to (***) ***-**** or submit via e-mail to ****@*****.*** This is a 2nd shift only position. Disclaimer: The above statements are intended to describe the general nature and level of work being...Afternoon shiftPermanent employmentMonday to Friday- ...Position Description Now Hiring- BLENDER OPERATORS Anaheim Hills Schedule: 4AM-12:30PM +2 OT/ 6 days sometimes Must have at least 1 year of experience in general labor or machine operator Must have excellent attendance Will be moving material, taking...Afternoon shiftFull timeImmediate start
$17 - $23 per hour
...Dickson Testing Company Function Operations Workplace Type On-Site Position... ...Description *** This position is on the 2nd shift (3pm - 11pm). *** Business Profile... ...2 - 5 axis CNC/Automated mill and lathe machine tools to produce complex machined...Afternoon shiftHourly payPermanent employmentFull timeWorldwide$18 - $20 per hour
...good communication skills. Able to use standard hand tools. Able to lift 25 pounds. Accountable for cleaning the machine before completing the shift and/or prior to moving on to another machine. You may submit via e-mail to ****@*****.*** Disclaimer...Afternoon shiftPermanent employmentShift work$18 per hour
Plastic manufacturing company in Carson looking to hire entry level machine operators to join their team. These are full-time, long-term positions. Monday - Friday 1st shift: 6am - 6pm 2nd shift: 6pm - 6am Must be available for overtime and weekends Associate...Afternoon shiftFull timeMonday to FridayWeekend workDay shift- ...caps, tubing, and plugs. Duties: ~ Complete machine operation. ~ Set up new parts on all machines. ~ Complete shift machine reports. ~ Obtain piece weights... ...Monday-Friday 1st shift: 6 AM- 2:30 PM 2nd shift: 2 PM- 10:30 PM 3rd shift 10 PM-6 AM...Afternoon shiftWeekly payMonday to FridayShift workNight shiftDay shift
$18.47 - $21.47 per hour
...Job Description Job Description Operates, in the manner instructed, any machine tool to machine parts from all... ...the machine before completing the shift and/or prior to moving on to another... ...lift 25 lps. This is a position on 2nd shift only. Some weekends may be required...Afternoon shiftPermanent employmentWork experience placementShift workWeekend work$18.06 per hour
...Job Description Job Description Description: We are looking for a machine operator to join our 2nd shift team in Gardena, CA. The Machine Operator plays a critical role in the operation and maintenance of machinery in our sheet metal manufacturing plant. This position...Afternoon shiftHourly payMonday to Friday$22 - $28 per hour
...Friday 8:00am-4:00pm. You may also fax your resume to (***) ***-**** or submit via e-mail to ****@*****.*** This is a 2nd shift only position. Disclaimer: The above statements are intended to describe the general nature and level of work being...Afternoon shiftPermanent employmentMonday to Friday$24 - $28.5 per hour
...Job Job Details: Description: ~5+ years of CNC Machining. ~ LEAD - 2nd shift Position. ~ Provide Technical Support(Troubleshoot Mori... ...Equipment). ~ Move and Stage Product throughout the floor. ~ Operate machinery. ~ Provide updated scheduling reports. ~...Afternoon shiftPermanent employment- ...aptitude and interest in CNC machining or manufacturing Must have... ...Willingness to work assigned shifts and overtime as required Knowledge... ...I is expected to: Safely operate machines after training and... ...WORK HOURS Full-Time 2nd Shift ADDITIONAL INFORMATION...Afternoon shiftFull timeContract workLocal areaShift work
- ...running CNC waterjet. Able to understand machining theory and strategy Able to... ...composites. Responsibilities: Sets up and operates a variety of machine tools such as... ...accredited. WORK HOURS 9/80 work week. 2nd shift, 1PM - 10PM. This position will serve on...Afternoon shiftContract workLocal area
- ...About the Job Food Manufacture seeking production workers needed in the City of Commerce and Vernon 1st and 2nd shift available: Immediate start. Packing. Assembling. Working on the production line. Must be able to lift 35lbs-50lbs. Slip resistant...Afternoon shiftImmediate startDay shift
$26 - $30 per hour
...Machinist (2nd Shift) Country United States of America State / County... ...North Hollywood Function Operations Workplace Type On-Site... ...Independently operate 3-5 axis CNC machines and conventional mills to produce complex...Afternoon shiftHourly payPermanent employmentFull timeWorldwideMonday to FridayShift work$25 - $29 per hour
...Job Description Job Description 5+ years of CNC Machining Perform Self Inspection Operate CNC Machinery ( MORI - HASS ) Operate multiple machinery Read Blue Prints Perform Self Inspection Offset / Troubleshoot CNC Machinery Turning / Milling Experience...Afternoon shiftPermanent employment$18 - $22 per hour
...ITAR Registered. Summary/Duties: ( Responsible for performing press operations according to specified daily work orders by performing the following duties.) Operates production machines to produce parts in accordance with established standards and guidelines....Afternoon shiftFull timeImmediate startDay shift$18.5 - $20 per hour
...Job Description Job Description Machine Operator: Rewinder Table & Slitter: 2nd Shift Location: Santa Fe Springs, CA Base Pay: $18.50 - $20 per hour (based on experience) Employment Type: Full-Time Industry: Printing / Manufacturing Compensation...Afternoon shiftHourly payFull time$21 per hour
...Location: Torrance, CA Pay Rate: Up to $21/hour Shift: 2nd Shift | Monday–Friday, 1:00 PM – 9:30 PM Work Arrangement... ...School Diploma or equivalent. ~2+ years of experience operating semi-automatic machines or relevant technical experience. ~ Strong analytical...Afternoon shiftPermanent employmentContract workTemporary workMonday to FridayShift work$20 - $26 per hour
...mindset. Join us. A Day in the Life: In the position of Machine Operator, you will be Responsible for operating and maintaining... ...Impact You'll Make: Operate and monitor line, removing or shifting materials and/or finished product as necessary to facilitate...Afternoon shiftHourly payWork at officeShift work$99.28k - $105k
...Job Description Job Description We are seeking a Machine Operator 2nd Shift CNC to join our team! You will help oversee operational activities and ensure excellent quality control. Job Summary: The Production Machine Operator will safely control various machines...Afternoon shiftApprenticeshipWork at office$30 - $33 per hour
...Job Title: Machine Operator CNC Tube Bending Location: Hawthorne, CA Shift Options: ~1st Shift: 3:00 AM - 3:00 PM ~2nd Shift: 3:00 PM - 3:00 AM ~6 days per week Pay: $30-33/ hour Job Description This role involves setting up and operating CNC rotary...Afternoon shiftWeekly payContract workTemporary workShift workDay shift$30 per hour
...Job Description Job Description Job Title: Machine Operator CNC Tube Bending \n Location: Hawthorne, CA \n Shift Options: \n \n ~1st Shift: 3:00 AM - 3:00 PM \n ~2nd Shift: 3:00 PM - 3:00 AM \n ~6 days per week \n \n Pay: $30-33/ hour \n Job Description...Afternoon shiftWeekly payFull timeContract workTemporary workShift workDay shift$28 - $34 per hour
...Job Description Job Description Essential Functions of the Job: Set up. Operate CNC machines lathes in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation....Afternoon shiftPermanent employmentWork at office$22 - $25 per hour
...Description Job Description Conventional Machinist – Traubs/Lathe in Gardena, CA — $22.00–$25.00/hr DOE, 2nd shift, contract-to-hire. Set up and operate conventional machining equipment for precision fastener parts. THE BASICS Pay: $22.00–$25.00 per hour, depending on...Afternoon shiftHourly payWeekly payContract workFor contractorsLocal areaImmediate startShift work$24.57 per hour
Deburrer - 2nd Shift Eaton's IS AER FMC division is currently seeking a Deburrer- 2nd Shift... ...process steps within the deburr operations. Ensure quality compliance of all parts... ...inspect parts determining defects (i.e. machining operations, rust vs. heat-treat scale,...Afternoon shiftHourly payPermanent employmentRelocation packageMonday to FridayShift work$23 - $30 per hour
...Job Description Job Description Heat Treat Operator in Gardena, CA — $23.00–$30.00/hr DOE, 2nd shift, contract-to-hire. Run heat-treat furnaces and verify aerospace thermal-processing results. THE BASICS Pay: $23.00–$30.00/hr DOE Shift: 2nd shift, 3:30 p.m...Afternoon shiftWeekly payContract workFor contractorsLocal areaImmediate startShift work$24 - $29 per hour
...of material and selects the appropriate machine for the process. Perform all of the Grade... ...or management personnel. This is a 2nd shift position.** The preceding functions have... ...tool wear and offsets. Setup, program, and operate. Perform tool adjustment as required. Work...Afternoon shiftPermanent employmentWork experience placementFlexible hours$20 - $25 per hour
...Job Description Job Description Shift: 2nd Shift: Monday - Friday, 2:00 PM - 10:30 PM... ...schedule? Join a growing team where your machining skills, attention to detail, and... ...are valued. We're seeking dependable CNC Operators who take pride in producing precision parts...Afternoon shiftHourly payWeekly payFull timeFor contractorsMonday to FridayShift work$20 per hour
...Pay Rate: $20.00 per hour Schedule: ~1st Shift: 6:00 AM - 2:30 PM ~2nd Shift: 2:00 PM - 10:30 PM ~3rd Shift: 10:00 PM - 6:3... ...production goals, and contribute to a team that keeps operations running safely and efficiently. Education Requirements...Afternoon shiftHourly payWeekly payImmediate startShift workNight shiftDay shift$19.91 per hour
Description Pay Rate $19.91 per hour + $.50 shift premium 2nd shift At Foster Farms, our mission is creating great food and serving... ..., our animals, and our environment, while delivering operational excellence and exceptional value to our customers. We are...Afternoon shiftHourly payShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Machine Operator (2nd Shift). Be the first to apply!
- machine operator production Compton, CA
- machine operator manufacturing Compton, CA
- machine operator Compton, CA
- full time 2nd shift Compton, CA
- 2nd shift Compton, CA
- forklift 2nd shift Compton, CA
- evening shift Compton, CA
- swing shift Compton, CA
- part-time 2nd shift Compton, CA
- part time evening shift Compton, CA


