Mechanic

***This job has preference to qualified local job seekers within 60 miles of our Axis Gainesville, TX facility.

The primary role of the equipment Mechanic is to maintain and repair a variety of equipment including diesel engines, heavy trucks, workover rigs, pumping equipment, lifting equipment, and other rig and drill-out oilfield related equipment. The equipment mechanic will also perform the following but not limited to preventive and corrective maintenance, failure analysis, diagnostics, repairs, inspections, assembling and rebuilding of components or equipment (i.e.: engines, power trains, hydraulics, fuel systems, power generation, electrical codes, etc.) either in a shop or on location, with or without supervision.


Essential Duties and Responsibilities

The essential functions include, but are not limited to the following:

Maintains, diagnoses, and repairs a variety of equipment including but not limited to:

• Diesel/gasoline engines
• Cat
• DDEC
• MTU
• Cummins
• Perkins
• Mack
• Transmissions
• Allison 4700ofs, 6000
• Winches
• Electric
• Hydraulic
• High pressure pumps
• 0-3000psi
• 0-5000psi
• 0-10,000psi
• Work over rigs
• Late model and 300hp to 600hp
• Centrifugal pumps
• Air compressors
• Pneumatic valve and system
• Hydraulic systems
• Mobile/overhead crane
• Gear boxes
• PTO's
• 12 and 24-volt electrical systems
• Chassis and suspension
• Rims, tires, and wheel
• Forklifts
• Electro-mechanical equipment
• Wellhead and supporting equipment
• Other types of oilfield related equipment
• Execute required procedures for preventative maintenance and appropriate inspections required by Axis and customer
• Perform basic troubleshooting with electrical, mechanical, hydraulic, and pneumatic systems
• Repair and refurbish hydraulic power equipment
• Install and/or replace new or reconditioned repair parts
• Read and follow repair manual and perform repairs as listed in manuals
• Read and interpret basic measuring equipment
• Operate and maintain power equipment and lifting devices and follow-up with basic testing of equipment for proper operation
• Order parts as necessary for equipment with prior approval
• Troubleshoot breakdowns and issues on various types of oilfield well service equipment
• Be prepared at all times for calls from operators for troubleshooting issues, either at the shop or at wellsite
• Perform proper diagnosis based on troubleshooting on mechanical equipment
• Conduct routine maintenance or repair work including engine and transmission overhaul or unit engine swings, involving cleaning and lubricating parts
• Repair and maintain machinery and rotating equipment, such as motors, engines, mud pumps, drum brakes, draw works, swivels, laydown machines, high pressure fluid ends and power ends (frac pumps)
• Solid experience in disassembly and reassembly of non-working equipment to like-new working conditions, followed by extensive safety and operational condition checks before distributed to the field
• Ability to work as a team when working around the shop and field crews and assist other maintenance employees
• Work will be in the shop or in field on rig and services equipment depending on work assignment
• Complete proper paperwork as assigned

Minimum Qualifications (Knowledge, Skills, and Abilities)

• High School Diploma, GED or equivalent; Certification from trade or technical school in maintenance or Diesel repair highly preferred
• Five (5) years or more solid and proven work experience on oil field equipment or similar field with diesel engines and hydraulics
• Valid state-issued driver license; Class A or B license is preferred - a plus
• Strong and proven hydraulic knowledge
• Must have heavy experience in maintenance and repair on very complex hydraulic systems and know the difference between open loop and closed loop hydraulic equipment systems
• Prefer knowledge with laptop-based software for troubleshooting such as CAT Electronic Technician, CUMMINS INSIGHT, ALLLISON TRANS, MACK TECH TOOL, DETROIT DDEC, and MTU
• Would like to see experience with CAT C-15, Cat C-32, Detroit 14 liter, MTU 16v2000 tier 2 and tier 4, CM 850 Cummins Qsx 15, Allison 750 series, 4750 OFS, 6000, and 8000 series trans. Cotta drop boxes, Cooper right angle boxes, 224 twin disk Air clutches
• Ability to demonstrate safe work habits and work well with others in a team environment
• Work may be performed in all weather conditions
• Ability to lift heavy equipment up to 75 lbs.
• Ability to access the work environment by use of a ladder at heights of 50 ft. or more
• Long periods of standing, squatting, kneeling, reaching or similar activities may be necessary
• Able to perform duties with protective equipment, working near or with heavy tools and moving machinery
• Mobility, including entering confined spaces, enter areas by the use of ladders or other access devices; ability to bend, stoop, twist, stand, squat, crawl and walk
• Ability to work in a fast-paced environment and handle multiple tasks at once
• Basic problem solving and organizational skills
• Reliable telephone (cell phone) communication and transportation
• Able to clear pre-employment drug/alcohol and job-relevant screens

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.