Locksmith
Veterans Affairs, Veterans Health Administration
Summary The incumbent serves as a Locksmith for the Seattle VA Medical Center, Facilities Maintenance Shops in Seattle, WA. Responsibilities Coordinates with the supervisor and police to discuss special locking requirements and determine suitable locks to be utilized in solving security problems. Improvises trade techniques to adapt locking mechanisms for uses to which they were not specifically designed, to hamper or prevent the use of standard neutralization techniques. Determines whether locking devices have been tampered with and provides professional documentation to the Police Service as required. Makes independent judgments in determining work sequence, selection and use of trade tools, and techniques applied. May be required to provide technical assistance and guidance to other staff at any Puget Sound Healthcare remote location. Performs visual and operational checks to locate trouble sources and determine the best methods of correcting problems. Removes locks, disassembles, and detects worn or damaged parts. i.e. broken springs, jammed pins, bent discs, broken tail pieces, rust and corrosion. Lubricates and cleans parts, straightens bent parts, replaces broken parts, reassembles, tests, and reinstalls devices. Keys and rekeys locks by using standard key coding practices to conform to station policy and VA criteria. Maintains blank keys of all known locking devices, cuts keys required for issue and replacement as required; does not maintain "extra" keys, precut keys, or discarded turned-in keys. Carefully monitors the key accountability system. Maintains master keying plans for the facility. Install's, troubleshoots, maintains and repairs locks in doors, desks. office furniture, cabinets, safes and other units as required by approved work orders only. Makes necessary alterations to locking mechanisms and units to assure correct fit. Places escutcheon and face plates on doors to change size of existing holes, measures precisely and cuts off excess spindles, changes position of spline key to reverse lock case direction. Responsible for the installation, programming, maintenance of all type of combination locks, both standard and electronic. Install's panic hardware, closers, hinges and other miscellaneous door and cabinet hardware. Picks or neutralizes looks as required in emergency situation 'When keys are unavailable, removes broken keys from key ways, corrects doors sag by tightening hinges to bring locking components into proper alignment, and makes minor adjustments to door closures/coordinators to ensure proper locking alignment. Maintains materials and full set of tools and equipment Requisitions and stocks all supplies required In performance of duty. Works with computer to ensure that necessary Information Is on file pertaining 1o key issues to Include area designation and to program key control systems .(Proximity alarms and Physical Access Control Systems (PACS) and Site Master). Develops and maintains a special key hardware system for use In special areas such as mental health, meeting all special requirements for these areas. Works closely with the Safety Department on ensuring al equipment is in compliance with the latest VA requirements for these environments. Has a working knowledge of all types of electronic security locking devices for basic maintenance and repair. Incumbent has the ability to program look related software, transfer data to off-line electronic locks using PDA or a computer, generates electronic reports, lock & key audits, and maintains electronic records. Must have a good working knowledge required of architectural trades for the construction, maintenance and repair of a commercial or institutional building. Must have knowledge of ceramic tile. vinyl wall covering, plaster walls and ceilings, vinyl floor tile, various metals and suspended lay-in ceilings. Work Schedule: Monday - Friday, 8:00am - 4:30pm Position Description Title/PD#: Locksmith/PD40749A Critical Skills Incentive (CSI): Not approved Relocation/Recruitment Incentives: Not authorized Requirements Conditions of Employment You must be a U.S. Citizen to apply for this job Selective Service Registration is required for males born after 12/31/1959 Subject to background/security investigation Pre-employment physical required Selected applicants will be required to complete an online onboarding process. Acceptable form(s) of identification will be required to complete pre-employment requirements ( Effective May 7, 2025, driver's licenses or state-issued identification cards that are not REAL ID compliant cannot be utilized as an acceptable form of identification for employment. Participation in the seasonal influenza vaccination program is a requirement for all Department of Veterans Affairs Health Care Personnel (HCP) As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period or 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period or trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. Qualifications To qualify for this position, applicants must meet all requirements within 30 days of the closing date of this announcement, 09/24/2026. EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. The screen-out element is the ability to perform as a Locksmith without more than normal supervision. Duties may include but are not limited to: Thorough knowledge of the full range of locking devices, hinges, door assemblies, door closers, and door operators and their parts in order to select substitute parts which would be suitable for use in repairing and fabricating devices to meet special security objectives; Experiment with various types of materials such as metals, alloys, and plastics when developing parts and component; Able to select appropriate materials considering such factors as needed strength and hardness, machining characteristics, environmental factors, and the extent to which the materials used could complicate or hamper the use of standard neutralization techniques; Skilled in servicing a wide variety of commonly used locks, and the functions they perform involve repairing, replacing or fabricating parts covered by manufacturer parts catalogs and specifications. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements: Equipment Assembly, Installation, Repair Interpret Instructions, Specifications (includes blueprint reading) Measuring Instruments Technical Practices Troubleshooting Use and Maintain Tools and Equipment Without more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements: Installs, maintains, troubleshoots, and repairs equipment or components from ladders, platforms, and scaffolding, and in cramped or hard-to-reach areas. This can require walking long distances, prolonged standing, stooping, kneeling, bending, and climbing in uncomfortable or tiring positions. Frequently lifts, carries, and sets up materials and equipment weighing up to 10 pounds. He/she may occasionally handle materials and equipment weighing more than 50 lbs. Working Conditions: Working conditions vary by environment. It may be indoors or outside and is generally dirty, dusty, greasy, and may involve inclement weather. May be assigned to work in areas where certain potentially harmful physical and/or chemical agents are present, such as in research labs. To ensure safety and health, personnel protection programs are maintained. These programs may include engineering controls, 1raining, work procedures, use of personal protective equipment, and medical surveillance. As part of the medical surveillance program, employees may be required to undergo medical examinations to assess their medical qualification for duty. Education Additional Information Receiving Service Credit for Earning Annual (Vacation) Leave: Federal Employees earn annual leave at a rate (4, 6 or 8 hours per pay period) which is based on the number of years they have served as a Federal employee. Selected applicants may qualify for credit toward annual leave accrual, based on prior work experience or military service experience. This credited service can be used in determining the rate at which they earn annual leave. Such credit must be requested and approved prior to the appointment date and is not guaranteed. This job opportunity announcement may be used to fill additional vacancies. If you are unable to apply online or need an alternate method to submit documents, please reach out to the Agency Contact listed in this Job Opportunity Announcement. Under the Fair Chance to Compete Act, the Department of Veterans Affairs prohibits requesting an applicant's criminal history prior to accepting a tentative job offer. For more information about the Act and the complaint process, visit Human Resources and Administration/Operations, Security, and Preparedness (HRA/OSP) at The Fair Chance Act.
- ...uniforms Health insurance Paid time off Vision insurance Bonus based on performance Training & development Job Title: Locksmith Technician Reports To: General Manager or Franchise Owner Key Areas of Responsibility: The Lead Locksmith Technician...Suggested
$1,200 per month
...Locksmith Technician We are a reputable locksmith company based in Washington, seeking a skilled Locksmith Technician to join our team. As a Locksmith Technician, you will be responsible for installing, repairing, and maintaining various types of locks and security systems...SuggestedPermanent employmentFull timeVisa sponsorshipWork visa$1,500 per month
...with clients professionally to understand their needs and recommend appropriate solutions. Qualifications Proven experience as a Locksmith Technician. Excellent knowledge of various lock types and their functions. Ability to use locksmith tools effectively. Experience...Suggested$1,700 per month
...We are a reputable locksmith company based in Washington seeking a skilled and experienced Locksmith Technician to join our team. As a Locksmith Technician you will be responsible for installing, repairing and maintaining locks and security systems for residential and...SuggestedFree visa$1,700 per month
...Locksmith Technician We are hiring a skilled Locksmith Technician to join our team in Washington. The ideal candidate will have experience in the locksmith profession and be able to work full-time with an expected salary of 1700$. This is a great opportunity for English...SuggestedFull time$1,400 per month
...We are in need of a skilled Locksmith Technician to join our team in Washington. The ideal candidate should be proficient in repairing and installing various types of locks from standard to high-security systems. They should possess strong troubleshooting skills and be...Contract workRelocation$1,300 per month
...A reputable locksmith company in Washington is seeking a skilled Locksmith Technician to join our team. This full-time position is suitable for Malayalees, Filipinos and English‑speaking individuals with or without experience in the locksmith profession. The ideal candidate...Full timeFree visa$900 per week
...Locksmith Technician We are a fast-paced locksmith company in Washington seeking a skilled Locksmith Technician to join our team. The ideal candidate will have at least 2 years of experience in the locksmith industry and be able to handle a variety of lock and key services...Visa sponsorship$1,400 per month
...Location Washington USA We are seeking a skilled and experienced Locksmith Technician to join our team in Washington As a Locksmith Technician you will be responsible for installing repairing and maintaining various types of locks and security systems This is a full-time...Full time- ...Locksmith Employee will be assigned to the Maintenance and Operations Section of Facilities Management Service, VA Healthcare System, Seattle, WA. The Locksmith performs complex tasks involved in building, repairing, overhauling, modifying, adapting, testing and installing...
- ...Locksmith Duties Coordinates with the supervisor and police to discuss special locking requirements and determine suitable locks to be utilized in solving security problems. Improvises trade techniques to adapt locking mechanisms for uses to which they were not specifically...Work at officeRemote workRelocation packageMonday to Friday
- ...Summary The incumbent serves as a Locksmith for the Seattle VA Medical Center, Facilities Maintenance Shops in Seattle, WA. Learn more about this agency Duties Help Coordinates with the supervisor and police to discuss special locking requirements...Full timePart timeWork experience placementSeasonal workWork at officeRemote workTrial periodRelocation packageLong distanceMonday to Friday
- Locksmith The incumbent serves as a Locksmith for the Seattle VA Medical Center, Facilities Maintenance Shops in Seattle, WA. US Government Jobs
$35 - $42 per hour
...Commercial Locksmith Technician We're seeking a highly skilled Commercial Locksmith Technician in Seattle, WA to service commercial properties. Responsibilities include installing, repairing, and maintaining locks and door hardware, creating and managing master key...Hourly payImmediate start$33 - $38 per hour
KAG is now seeking to hire a Diesel Technician I-III! Diesel Mechanics are required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Salary $33.00 -$...Hourly payTemporary workLocal areaImmediate start$45.9 - $62.1 per hour
Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: SCA Job Qualifications: Skills: Blueprints, Metals, Sheet...Hourly payTemporary workWork experience placementSummer workImmediate startWorldwideFlexible hours$25 per hour
Job Description Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work...Hourly payFull timeTemporary workPart timeLocal area$21 per hour
ALL ROADS LEAD TO THIS OPPORTUNITY The journey to Valvoline Instant Oil Change (VIOC) is different for everyone. Our employees are students, recent grads, parents, veterans, career changers—who have all found their way to our team. No matter where you’ve been or what...Hourly payWeekly payPart timeWeekend work- Endurance Energy CNC Machinist/Programmer Endurance is building the world's first modular subsea geothermal power plants, converting vast thermal resources under the ocean into gigawatts of baseload power. Backed by Founders Fund, Felicis, First Round Capital, and Point...Full timeWork experience placementFlexible hours
- MicroDental Laboratories is a world-class, rapidly growing, global company with strong benefit packages and great long-term stability. We operate in over 25 locations in North America as both MicroDental Laboratories and Modern Dental Laboratory USA. With our focus on ...Full timeTemporary workRelocation packageFlexible hours
$55 per hour
Job Title: CNC Programmer Location: Sodo Seattle, WA Top Skills - Expert-level workholding and fixture design capabilities - Proficiency programming 3-axis, 5-axis, and mill-turn machines. - Ability to deliver complete manufacturing packages: NC code,...Contract workTemporary work$26 - $30 per hour
At Trelleborg every part made allows us to make a difference. Founded in 1905, Trelleborg is an international organization operating within a multitude of industries including aerospace, automotive, medical, industrial, and food, water and beverage. Our manufacturing team...Permanent employmentWork experience placementShift work- CNC Programmer We are seeking a CNC Programmer to create CNC programs for precision machined parts using Mastercam and other CAM software. You will translate customer designs into optimized manufacturing programs, simulate NC files, design fixture tooling, and support...Contract work
$30 per hour
Traveling CNC Lathe Machinist | Per Diem Overview We are hiring experienced CNC Lathe Machinists to support precision manufacturing operations in a fast-paced aerospace production environment. This is an excellent opportunity for machinists who enjoy working with...Weekly payDaily paidContract workTemporary workWeekend work3 days per week$40 - $45 per hour
Cnc Machinist Tradesmen International is immediately hiring experienced CNC Machinists for projects located in or around Tukwila, WA. This is a first shift opportunity and the pay rate is $40-$45/hour based on experience and skill level. If you are a Machinist and want...Work at officeImmediate startWeekend workDay shift- Position: CNC Operator Location: Renton, WA Type: Full-time | On-site Job Summary: The CNC Operator - Turning Department is responsible for setting up, operating, monitoring, and supporting CNC turning equipment for producing precision-machined...Full time
$30 - $36 per hour
Job Title: CNC Operator Job Description This role focuses on setting up and operating CNC machines to produce high-quality precision machined parts in a prototype and low-volume environment. You will interpret technical drawings and blueprints, monitor machine operations...Weekly payContract workTemporary workShift workDay shift$25 - $30 per hour
Job Description Aerotek is hiring CNC Mill Machinists for a manufacturing shop in Spokane Valley! Job Duties: Will be operating CNC Mills according to specifications. Will be working with blueprints and precision measuring equipment to meet tight tolerances. May also work...Weekly payContract workTemporary workWork at officeShift work- Blue Origin is seeking an experienced CNC Machinist in Washington to perform low-to-mid complexity machining and support production with precision and reliability. You will read drawings, apply GD&T, and select appropriate tooling while maintaining safety and quality standards...
$30 - $35 per hour
CNC MachinistLocation: Seattle, WADuration: 11+ Months- possible extension/conversionSalary and Other Compensation: The hourly rate for this position is between $30.00/hr- $35.00/hr. Factors which may affect pay within this range may include geography/market, skills, education...Hourly payTemporary work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Locksmith. Be the first to apply!



