Assembler Mfg Direct - Interior Doors
Builders FirstSource
Acworth GA Millwork - 399 Northpoint Parkway South East (30102), 399 Northpoint Parkway South East, Acworth, Georgia, United States of America Job Description The Assembler is an entry‑level position that performs repetitive assembly operations to mass‑produce products such as windows, doors, trusses, panels, or stairs by performing the following duties.
ESENTIAL DUTIES AND RESPONSIBILITIES
Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned.SUPERVISORY RESPONSIBILITIES
This job has no supervisory responsibilities.MINIMUM REQUIREMENTS
There are no requirements in terms of education or experience. Prior carpentry experience helpful.COMPETENCIES
Ability to read and comprehend simple instructions; ability to write simple correspondence; verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide; ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions; ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved.WORK ENVIRONMENT / PHYSICAL ACTIVITY
Continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. Continuously required to walk. Occasionally required to climb or balance and stoop, kneel, crouch, or crawl. Must continuously lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds with assistance as reasonably needed. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Continuously exposed to moving mechanical parts and may be exposed to airborne particles. Frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. Noise level usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.EEO / ADA STATEMENTS
B uilders FirstSource is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status or status as an individual with a disability. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Builders FirstSource, please call View phone number on click.appcast.io or email: View email address on click.appcast.io . The email address is intended only to be used to request an accommodation in submitting an application for a job opening.BENEFITS
We offer competitive, affordable benefits designed to improve life for you and your family. To view all benefit offerings click here #J-18808-Ljbffr Builders FirstSourceVacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Assembler Mfg Direct - Interior Doors in Acworth, GA vacancy
- Purpose The Assembler is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. Essential Duties and Responsibilities Places parts in specified...Suggested
- ...experiences, and build a career with unlimited horizons. PURPOSE The Assembler is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL...Suggested
- ...leading construction materials supplier in Acworth, Georgia, is hiring an entry-level Assembler. This role involves repetitive assembly operations for products such as windows and doors, requiring standing, lifting, and adhering to safety protocols. No formal education...Suggested
- Builders FirstSource is looking for an entry-level Assembler in Acworth, Georgia. In this role, you will perform repetitive assembly operations for products like windows and doors, ensuring quality and consistency in output. The position offers a great opportunity to start...Suggested
- ...building materials provider in Acworth, Georgia, is seeking an entry-level Assembler to join its team. The role involves performing repetitive assembly tasks for products such as windows, doors, and stairs. While no specific education or experience is required, prior carpentry...Suggested
$18.5 per hour
...paycheck, and a better team, this is it. Join us as an Electrical Assembler and be part of a 100+ year global leader shaping the future of... ...+ steady overtime (earn an extra $277+ per week)Weekly Pay: Direct deposit or pay card—your choiceAffordable Health Benefits After...Weekly payContract workTemporary workMonday to FridayShift work$18.5 per hour
...Electrical Assemblers Kennesaw, GA If you're looking to wrap up 2025 with a better job, a better paycheck, and a better team, this... ...steady overtime (earn an extra $277+ per week) ~ Weekly Pay: Direct deposit or pay card—your choice ~ Affordable Health Benefits...Weekly payFull timeContract workTemporary workMonday to FridayDay shift- Builders FirstSource, Inc. in Acworth, Georgia is looking for an Assembler to join their team. This entry-level position involves performing repetitive assembly operations to mass-produce various building components. Responsibilities include fastening parts together, cutting...
- ...supplier in Acworth, Georgia, is seeking individuals for an entry-level assembly position. This role is responsible for performing various assembly tasks to mass-produce products like windows and doors. Candidates should have the ability to follow instructions and perform...
$18 per hour
...Job Description Job Description Build the Future of Comfort as an Assembly Associate! Location: Kennesaw, GA | Payrate: $18.00/hour | Schedule: Monday - Thursday 4pm - 2:30am, plus OT on Fridays and Saturdays as needed. PDS Tech Commercial is partnering...Hourly payTemporary workLocal areaImmediate start- ...Assembler / Production Assembly Specialist If you excel at high-volume, repetitive assembly and need immediate contract income, this... ...to the test in a fast-paced environment where your output directly contributes to production goals. Your responsibilities:...Contract workTemporary workImmediate start
- ...to be accomplished by reading working instructions and verifying correct parts are at the station at the beginning of each shift. Assembles components by following the work instructions for the required station. Verifies specifications by measuring completed component...Full timeShift work
- ...into communities. Job Description The Service Technician reports directly to the Service Manager. In coordination with the Service... ...physical operation and proper appearance of the community, both interior and exterior. The Service Technician must be CFC certified at least...Contract work
- ...fabrication and repairs/replacement of doors, walls, signs, desks,... .... Perform a variety of interior masonry duties including installation... ...of all backflow prevention assembly devices within all buildings.... ...compliance with governing directive, correcting violations and...Full timeFor contractorsShift work
- ...Automatic Door Service TechnicianLane Valente Industries is a leading international construction and facility maintenance company... ...of ADA operators, manual and swing doors, door closers, pivot assemblies, panic hardware, hollow metal, storefront and automatic folding...
- ...What You'll Do Fabricate and weld custom steel components and assemblies Read and interpret blueprints, drawings, measurements, and fabrication... ...a hands-on custom fabrication environment where your skills directly impact the finished product. If you enjoy building something...
$50k
...Electrical Assembly TechnicianLocation: Acworth, GaPosition Type: Full-Time, PermanentSalary: Up to $50,000 base plus Full Paid Benefits, including MDV, 401kVacation: Generous vacation program, including 2 weeks vacation, standard holidays, and 2 weeks paid vacation at...Full time- Inalfa Roof Systems Group is seeking a production/operator candidate for the Cherokee Assembly site. This full-time role involves reading work instructions, assembling components, and maintaining quality and safety across the shift. You will use standard hand and power...Full timeShift work
- Copeland is hiring a Panel Assembler for the day shift in Kennesaw, GA. You will mount, wire, cut and assemble electrical control panels per engineering and UL508A specs, reading schematics and CAD drawings, using hand and power tools while standing all day. The role requires...Day shift
- ...to Engineering and UL508A specifications. Employees will be responsible for but not limited to the mounting, wiring, cutting, and assembling of various components required in the build process. Duties & Responsibilities Accurately measure, drill, punch and cut metal...Hourly payMonday to FridayShift workDay shift
- ## Panel Assembler- Day Shift申请locations: Kennesaw, GA, USAtime type: Full timeposted on: 今天发布job requisition id: JR117171**About Us**We are a global climate technologies company engineered for sustainability. We create sustainable and efficient residential, commercial...Hourly payTemporary workStart working todayMonday to FridayFlexible hoursShift workDay shift
- ...All of our kits have pre-packaged and pre-cut materials for easy assembly and installation. Most kits can be built by one installer, in... ...crews Work as much or as little as YOU want! DAILY pay by Direct Deposit If you have... Building / construction experience...Daily paidFull timeFor contractorsImmediate startFlexible hours
- If you excel at high-volume, repetitive assembly and need immediate contract income, this role is for you! We are urgently hiring assemblers... ...to the test in a fast-paced environment where your output directly contributes to production goals. Your responsibilities: -...Contract workTemporary workWork experience placementImmediate start
$18 - $26 per hour
...great opportunity for experienced welders looking for steady, full-time work. Key Responsibilities Fabricate metal parts and assemblies according to specifications Perform MIG and TIG welding (preferred) on various metals Set up and operate metalworking...Hourly payWeekly payFull timeFlexible hours- ...architectural and industrial products. Examples include: Handrails, Wall Panels, etc. Experience installing elevator panels and cladding doors is valuable as well. Pending experience this candidate could serve as a lead installer leading a crew of men on assigned jobs....
$85k - $120k
All 4 Seasons Garage Doors - Marietta, GA Join the All 4 Seasons Garage Doors Team - Where Every Door You Open Is a New Opportunity! Location: Marietta, GA Top Performers Earn $85,000-$120,000 Annually After Training Do you love working with people, solving real problems...Weekend work- AtWork Group is hiring Window Washing Technicians for direct-hire positions in Marietta, GA. This role involves primarily residential window cleaning and offers a great opportunity for dependable individuals to earn commission in addition to an hourly wage. Qualified candidates...Hourly pay
- ...electrical control panels according to Engineering and UL508A specifications. Responsibilities include accurately measuring, cutting, and assembling various metal enclosures, wiring according to schematics, and maintaining safety in a fast-paced environment. The ideal candidate...Monday to Friday
$85k - $120k
All 4 Seasons Garage Doors in Marietta, GA is seeking a motivated Garage Door Technician to install, repair, and maintain residential and commercial doors and openers. You’ll work independently in the field, providing professional service and safety-first workmanship. You...Weekend work- ...stand lift, transfer board, oxygen equipment, catheter, specimen, transfer pole, trapeze, wheel chair, scale, and other equipment as directed by the Resident Care Coordinator/HSD. Capable of taking accurate vital signs and weights. Able to perform assigned housekeeping...Interim roleImmediate startShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler Mfg Direct - Interior Doors. Be the first to apply!


