Heavy Equipment Operator
KEMRON Environmental Services, Inc.
Job Summary : The KEMRON Heavy Equipment Operator reports to an onsite Project Manager and safely operates a variety of equipment utilized in the construction of roads, highways, parking lots, etc. This may include operating heavy equipment such as cranes, clamshells, power shovels, motor graders, heavy loaders, carryalls, bulldozers, rollers, scrapers, and large industrial tractors with pan or scrapper attachments. Equipment is used to excavate, load, or move dirt, gravel, or other materials, as well as clearing and grubbing to complete remediation of sites and excavation of contaminated soil consistent with standard environmental procedures, loading trucks proficiently. Operator may read and interpret grade and slope stakes and simple plans, and may grease, adjust and make emergency repairs to equipment. Primary duties and responsibilities include :
- Operate multiple types of heavy equipment of various sizes and weights able to establish required grades and cuts within acceptable tolerances.
- Follow Daily Procedures & Protocols as set forth in all job orientation and training.
- Perform routine inspection and preventive maintenance on assigned equipment and refer defects or needed repairs to supervisor, as well as to clean equipment.
- Assist in the installation and maintenance of traffic control devices. Control traffic at work sites by flagging to guide traffic through work areas, as required or assigned.
- Assist as laborers and/or technicians as requested by supervisors and foreman to expedite work as needed and aid personnel to operate the site in a safe manner.
- Pass training in shoring and sloping as required by OSHA, safety requirements, KEMRON SOPs and Military safety requirements.
- Ensure that proper safety and incident reporting procedures are followed. Bring problems to the attention of the Project Manager, Foreman, Health & Safety Officer, Corporate Health & Safety Director or HR Manager.
- Requires five (5) years of experience in operating heavy equipment, two (2) of which must be related to environmental construction.
- Must possess valid and appropriate state driver's license with no serious violations within the three years prior to employment and have good driving history approved by KEMRON's insurance carrier that qualifies employees to drive company vehicles.
- Must have sufficient education to make appropriate arithmetic equations and complete written documentation; or an equivalent combination of experience, education and training that provides the desired knowledge, skills and characteristics for the position.
- FEMA 100 200, 700 and 800 ICS training, as required on worksite.
- Considerable knowledge of heavy-equipment operating principles.
- Ability to drive and operate heavy equipment under varying working conditions.
- Working knowledge of methods, materials and tools used in environmental remediation and construction work.
- Working knowledge of hazards and safety precautions common to heavy equipment operations.
- Ability to work from construction specifications or blueprints
- Ability to meet attendance schedule with dependability and consistency.
- 40-hour OSHA Hazardous Waste Operator (HAZWOPER) training.
- Current 8-hour HAZWOPER refresher training.
- Current CDL.
- Certified first aid and CPR training.
- Sloping and shoring training.
- Equipment Operator Safety Training.
- Primary residence located within 50 miles of project site.
- Good eyesight and excellent coordination to operate both hand and foot levers simultaneously.
- Apply good judgment to safely and correctly follow steps necessary to perform complicated tasks.
- Work closely, safely, and respectfully with other employees/positions on site without continuous supervision.
- Ability to remain constantly alert and observant of surroundings.
- Regularly perform tasks in outside weather conditions, including rain, extreme heat, wet and/or humidity.
- Perform safely while exposed to vibration, dust, asphalt, and/or hazardous material.
- Satisfactorily and safely perform manual work requiring periods of extensive physical exertion and potential exposure to adverse weather conditions.
- Understand and carry out written and oral instructions.
- Will frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 75 pounds.
- Withstand daily loud and possibly continuous noise level with proper hearing protection.
- Frequent and possibly prolonged sitting, talking or listening.
- Frequent or continuous use hands to finger, handle, feel or operate objects, tools or controls.
- Reaching with both hands and arms, often in repetitive patterns.
- Safely and easily walk short distances, sometimes over uneven terrain.
- Must pass required medical monitoring HAZWOPER physical exam.
- For specific project, must pass physical exam to work while using respiratory protection including Air Purifying Respirators and supplied air respirators.
- Understand and follow KEMRON SOPs for specific task(s).
- Safely remain in a stationary position, often standing or sitting for prolonged periods each day.
- Must read, understand and sign-off on Corporate and worksite Health and Safety Plan(s).
Vacancy posted 11 hours ago
Similar jobs that could be interesting for youBased on the Heavy Equipment Operator in Wichita, KS vacancy
- ...for a place to build your career with a company that values its people and the work they do, we invite you to apply for our Heavy Equipment Operator position in Wichita, KS. Responsibilities and Qualifications: Excavate and grade footings, building pads, parking...SuggestedFor contractorsSummer workFlexible hours
- ...construction, asphalt/concrete paving and water/wastewater treatment plants. Job Description The employee is responsible for operating heavy equipment used for moving or grading earth, applying concrete, asphalt or other materials to road beds or equipment used for tamping...SuggestedTemporary work
- ...Equipment Operator The Equipment Operator is responsible for operating heavy equipment on a construction jobsite in a safe manner. The Equipment Operator must complete prestart checks, assist with fluid checks, securing the equipment, cleaning, and other duties as directed...SuggestedFor contractorsShift work
- ...The candidate will be responsible for the safe operation of truck & trailer as well as the timely delivery of equipment. BENEFITS ~ Paid Time Off ~ Holiday Pay... ...Ability to stand, sit, stoop, bend, walk and lift heavy objects (50 lbs) WORK ENVIRONMENT The...SuggestedTemporary work
- ...construction, asphalt/concrete paving and water/wastewater treatment plants. Job Description The employee is responsible for operating heavy equipment used for moving or grading earth, applying concrete, asphalt or other materials to road beds or equipment used for tamping...SuggestedTemporary work
$18 - $25 per hour
...Excavator Operator – Earthwork Division Dondlinger Construction is hiring excavator operators immediately for our Earthwork Division... ...Operate standard excavators, along with other heavy equipment as needed. Includes loaders, rollers, scrapers, blades, dozers...Hourly payImmediate start- ...Job Description Job Description We are seeking a Heavy Equipment Operator/ CDL Driver to become a part of our team! You will operate a truck/trailer to transport equipment or material to jobsites, as well as run heavy equipment such has, excavator, dozer and loader...
- ...promptly and are responsible for maintaining the truck and mixer equipment. Concrete Mixer Truck Drivers are primarily responsible for... ...mixer before each delivery for any defects or malfunctions Operating the truck safely and efficiently, adhering to all traffic laws...
$1,000 - $1,200 per week
About the job Quick Haul CDL-A Truck Driver No Touch Job Details: ~ Truck drivers on this account get home weekly ~$1000 - $1200 weekly pay average ~ Driver unload is required ~ Even mix of drop & hook and live unload ~ Steady miles and consistent home time...Weekly payApprenticeshipLocal area$16 - $16.75 per hour
...06:00am to 10:30pm) Read and interpret blueprints to ensure products and materials meet required specifications Safely operate production equipment and forklifts to move raw materials and finished goods Inspect and make basic accept/reject decisions on materials and finished...Weekly payFull timeTemporary workMonday to FridayShift work- ...Overview At Firebirds, every role plays an important part in creating extraordinary guest experiences. As a Dish Machine Operator, you are a key part of our Back of House team-ensuring cleanliness, safety, and organization so the kitchen can operate at its highest...Hourly payLocal areaMonday to FridayFlexible hoursShift work
$41.6k - $52k
...Machinist/OperatorWe are seeking skilled 5 Axis CNC Machinists/Operators to join our team, with openings available on all shifts... ...engineering information to determine product conformance.Operate equipment to verify operational efficiency.Diagnose machine tool malfunctions...Permanent employmentLocal areaAll shiftsShift workNight shiftAfternoon shift- ...Required Skills:Must have experience in PC-DMIISMust have 2-3 yrs. experience in CMM OperationPreferred:1 or more years' experience operating a CMM or portable CMM machine2-year technical college education or a completed apprenticeship in a recognized trade, craft or...Permanent employmentApprenticeshipRelocation packageDay shiftAfternoon shift
- ...Machining ManagerJob Location: Wichita, KS, USAExperience: +3 years operating 5 axis CNC MachinesJob Duties:Machining large parts to... ...materials onto machinesObserve and listen to operating machines or equipment in order to diagnose machine malfunctions and to determine...Full timeWork at officeLocal areaShift workWeekend workAfternoon shift
$21 - $26 per hour
...other major customers. Responsibilities Set up and operate 3-axis CNC mill turn lathes with live milling tooling and twin... ...Maintain a clean, organized work area and care for both company equipment and personal tools. Collaborate with team members in a family...Weekly payContract workTemporary workCasual workShift workDay shift- ...Using your experience, you will perform duties to set up and operate a number of different computerized numerical controlled machine... ...will be responsible for set-up and operations of special purpose equipment, and numeric control machines and machining centers for fabrication...
$18 - $23 per hour
...Job Description Job Description Job Title: Machinist Job Description We are seeking a skilled machinist to set and operate machines, specifically milling machines, to create machine parts that meet precise specifications. Responsibilities Set up and operate...Weekly payContract workTemporary workWork at officeNight shiftAfternoon shift$27 - $31 per hour
...verifies cutting tools, and performs a wide range of machining operations—including boring, drilling, milling, tapping, and threading—on... ...efforts. Operate conventional and computerized machining equipment, including mills and lathes, to complete assigned work. Operate...Weekly payContract workTemporary workWork at officeMonday to FridayNight shiftAfternoon shift$45.76k - $52k
...shapers, grinders, and vacuum fixtures. You set up, adjust, and operate basic and advanced machine tools to perform high-precision... ...setups, including selecting tools, loading fixtures, and preparing equipment for production runs. Edit CNC programs as needed to optimize...Weekly payPermanent employmentTemporary workWork at officeShift workWeekend workDay shiftAfternoon shift$36 per hour
...investment, and business success. We have been manufacturing parts and equipment for the global food processing and packaging industries in... ...Expectations and Qualifications: Expertise in set-up, operation, and troubleshooting to consistently achieve production rates...TraineeshipRelocationRelocation packageDay shiftAfternoon shift- Job Description Job Description Position Requirements: Must have mechanical skills Must know how to spot and stitch weld Ability to read tape measure and blue prints General Requirements: Punctual, dependable, and have good attendance Strong work ...
$18 per hour
...Through our long-standing partnerships with processors, original equipment manufacturers, and product designers, we have worked for... ..., future minded solutions. We are currently seeking a Machine Operator for our Wichita, Kansas facility. This position will be on 1st...Hourly payMonday to FridayDay shift- Machine Operator We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment... ...machinery such as CNC routers, shapers, sanders, saws, or molding equipment used in cabinet door manufacturing Set up machines according...Full timeShift workDay shift
- Wichita KS 1200 Blake Drive Wichita, KS 67219, USA Wichita KS 1200 Blake Drive Wichita, KS 67219, USA Can you handle materials safely and efficiently? Are you passionate and do you want to make an impact? If so, begin your new career with TW Metals! Requirements Be ...
$1,000 - $1,200 per week
About the job Quick Haul CDL-A Truck Driver No Touch Truck drivers on this account get home weekly $1000 - $1200 weekly pay average Driver unload is required Even mix of drop & hook and live unload Steady miles and consistent home time Additional Info: Full benefit...Weekly payApprenticeshipLocal area$22.6 per hour
PBNA $22.60 / hour Position operates one or multiple pieces of manufacturing equipment. This may include moving raw material handling to the production line, and/or filling, capping, sealing, labeling or packaging product. Removes damaged products or supplies, as needed...Shift workWeekend workAfternoon shift$20.35 per hour
...benefits like our Smithfield Scholarship Program for employees’ children. What You’ll Do Machine Operators will work with meat cutting/packaging machines and other equipment to process meat products for the consumer. These positions require technical knowledge of...Hourly payFull timePart timeLocal areaLong distanceFlexible hoursShift workAfternoon shift$71 per hour
Job Description Job Description Shape the Future of Flight: Earn Up to $71/Hour as a Composite Mechanic Supporting Advanced Aircraft Programs PDS Tech Commercial is partnering with a leader in the aviation industry to hire experienced Composite Mechanics for an exciting...Hourly payFull timeTemporary workLocal areaMonday to FridayShift work$21 - $26 per hour
...aerospace and other major customers. Responsibilities Set up and operate 3-axis CNC mill turn lathes with live milling tooling and twin... ...a clean, organized work area and care for both company equipment and personal tools. Collaborate with team members in a family...Weekly payContract workTemporary workCasual workWork at officeShift workDay shift- ...appropriate tolerances. (Vernier, Micrometer, indicators, etc.) Have the skills to perform manual work (drilling, deburring). Be able to operate multi-axis CNC machines and conventional machines, make setups on templates using practical knowledge and machining workshop...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Heavy Equipment Operator. Be the first to apply!
Related searches
- operator heavy equipment Wichita, KS
- heavy equipment Wichita, KS
- experienced heavy equipment operator
- aecon heavy equipment operator
- overseas heavy equipment operator
- heavy construction equipment operator
- senior heavy equipment operator
- pipeline heavy equipment operator
- heavy fire equipment operator
- kearl heavy equipment operator


