Hvac Sheet Metal Installer

Job Description

Job Description

Job Title: Sheet Metal Technician (Commercial HVAC Installer)

Job Description

This role focuses on commercial HVAC sheet metal installation for projects based in Palmdale, Santa Clarita, and the Greater San Fernando Valley area. You will install, assemble, and support a variety of duct systems and hot water piping components, ensuring high-quality workmanship and safe operation. The position follows a daytime schedule and offers the opportunity to transition from contract to a long-term role based on performance.

Responsibilities

• Install commercial HVAC sheet metal duct systems, including spiral, round, rigid, and flex ducting, according to project specifications.
• Measure, cut, and assemble sheet metal ducts to precise dimensions using appropriate hand and power tools.
• Install and secure hangers, supports, and insulation to ensure proper function and stability of HVAC systems.
• Perform duct sealing and insulation to maintain system efficiency and prevent air leaks.
• Use scissor lifts safely to install ductwork and related components at elevated heights, including up to 40-foot lifts.
• Install round duct and associated fittings in commercial environments, ensuring correct alignment and support.
• Troubleshoot and repair HVAC sheet metal systems and ductwork as needed to maintain proper operation.
• Use drills and other hand tools to fasten and assemble components safely and efficiently.
• Maintain a clean, organized, and safe work area, following all safety guidelines and wearing required protective gear.
• Arrive on time, prepared with required tools and equipment, and consistently demonstrate reliability and a strong work ethic.
• Travel to various jobsites, including locations between Palmdale and Los Angeles, as project needs require.

Essential Skills

• 4–5 years of HVAC sheet metal installation experience in commercial settings.
• Proficiency installing spiral, round, rigid, and flex HVAC ducting.
• Ability to measure, cut, and assemble sheet metal ducts to exact specifications.
• Experience with commercial HVAC duct installation, including hangers, supports, and insulation.
• Skill using hand and power tools, including drills, for sheet metal and ductwork.
• Experience with duct sealing and insulation to ensure system performance.
• Ability to perform troubleshooting and repair on HVAC sheet metal systems and ductwork.
• Capability to work safely on scissor lifts, including up to 40-foot lifts, for elevated installations.
• Ownership of necessary hand tools, including drills, to perform daily tasks.
• Punctuality, reliability, and a strong work ethic, with readiness to work hard and complete tasks safely and efficiently.

Additional Skills & Qualifications

• Experience working specifically with commercial HVAC systems and duct installations.
• Comfort working at heights on scissor lifts and other elevated platforms.
• Ability to coordinate duct and piping installations in active commercial jobsite environments.
• Experience installing supports, hangers, and insulation to meet mechanical design requirements.
• Familiarity with air bleeding procedures and valve placement for hot water systems.
• Reliable transportation to travel between Palmdale and jobsites in the Greater San Fernando Valley and Los Angeles areas.
• Readiness to work within a contract-to-hire arrangement over approximately six months.
• Ability to follow safety protocols consistently and wear required protective equipment.
• Strong attention to detail and commitment to producing clean, accurate, and code-compliant work.

Why Work Here?

You will join a down-to-earth company that prioritizes taking care of its employees and values reliability, teamwork, and craftsmanship. After ninety days, you become eligible for a comprehensive benefits package that includes health, vision, and dental insurance, along with participation in a 401(k) program. The schedule offers consistent daytime hours, and the contract-to-hire structure provides a clear path to long-term stability for those who perform well and demonstrate commitment.

Work Environment

This role is based out of the Palmdale area, with projects starting in Palmdale and extending to jobsites between Palmdale and Los Angeles. The standard work schedule runs from 6:00 a.m. to 2:30 p.m., providing predictable daytime hours. You will work primarily on commercial HVAC installations, often in active construction or retrofit environments that require attention to safety and coordination with other trades. The position involves regular use of hand and power tools, including drills, as well as frequent work on scissor lifts up to approximately 40 feet to install round duct and related components at height. You must provide and use your own hand tools and arrive prepared to work each day. The role requires consistent use of personal protective equipment, including a hard hat, safety vest, work boots, long pants, and a T-shirt, in accordance with jobsite safety standards. Reliable transportation is essential to reach various jobsites across the region, and the work environment emphasizes safety, professionalism, and steady, high-quality field installation work.

This is a Contract to Hire position based out of San Fernando, CA.

The pay range for this position is $30.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in San Fernando,CA.

This position is anticipated to close on Jun 30, 2026.

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Company Description

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.