Flight Safety Engineer

JT4 is hiring a Flight Safety Engineer for their Clearfield, UT located on Hills AFB . Note: This is a 3-year position with the possibility of yearly renewal thereafter. Primary Responsibilities During mission execution, monitor and assess the performance of cruise missile test articles in real-time against planned flight parameters/profiles, and recommend courses of action to UTTR mission control center (MCC) Range Safety Officers (RSOs) and Range Control Officers (RCOs) regarding continued test article flight or test article termination. Conduct independent pre‑mission Safety Review Boards (SRBs) to evaluate planned mission profiles and test article performance to ensure adherence to UTTR flight safety requirements and produce follow‑on reports with recommendations to the Range Operating Authority (ROA). Conduct independent analysis of and advise the ROA on the adequacy of cruise missile safety assessments, corrective measures, and risk mitigation following in‑flight anomalies or mishaps. When required/requested, represent the UTTR both pre‑ and post‑mission at a variety of meetings and locations such as design reviews, technical interchange meetings, mission planning meetings, safety evaluations/reviews, post‑mission debriefs, and mishap/anomaly investigations. Evaluate test article planned routes of flight to assure range and public safety, conduct manned site surveys, and recommend adjustments as required to routes to ensure safe employment of the test article. Read, interpret and utilize a variety of maps, Geographic Information System (GIS) products and software, such as SoftWright's Terrain Analysis Package, needed to develop products such as Radio Frequency (RF) propagation analysis and RF coverage plans. Conduct technical analysis and review of systems designed to support safe weapon employment and flight termination including RF Link Margin Analysis and Link Budget calculations. Act as a subject matter expert in analysis of requirements, development/design, deployment, operation, and troubleshooting of Enhanced/Flight Termination Systems in support of the customer and UTTR safety requirements. Interact and coordinate with the UTTR and the customer as required to ensure all UTTR and customer requirements or agreements are being met or adhered to. Other Responsibilities Required to read, understand, and provide input as required on a variety of technical and non‑technical documents related to customer support and UTTR operations such as but not limited to technical manuals, engineering documentation and schematics, design reviews, Program Introduction Documents (PIDs) and Project Support Plans (PSPs). Working Conditions Work is primarily sedentary in an office environment; however, some walking, stooping, bending, climbing stairs, stretching and lifting (up to 40 pounds) may be required. During mission execution, work is performed in a mission control center, under moderate mental stress, as part of a team of safety and operations professionals during real‑time mission execution. Travel to and from company work locations, some in remote/austere locations, is required (for example, occasional travel to Dugway will be required). Requirements – Education, Technical, and Work Experience A Bachelor of Science in engineering (Electrical Engineering preferred), from an ABET‑accredited academic institution and four years of related engineering experience, or an accredited Master of Science in engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position. Additional Qualifications Technical knowledge of the development, design, operation, evaluation, inspection, production, test, certification, application and standardization of airborne Enhanced/Flight Termination Systems (E/FTS) associated with airborne test articles and associated ground transmission systems and support equipment. Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on RF propagation, RF Engineering, and flight and weapons safety. Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area. Working knowledge of computer systems and computer‑based engineering tools. Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software. Excellent communication, analytical, and interpersonal skills. Planning/organizational skills and the ability to work under deadlines. Must be able to obtain and maintain a government security clearance. Must be a U.S. citizen. Must possess a valid, state‑issued driver's license. Benefits Medical, Dental, Vision Insurance. Benefits Active on Day 1. Life Insurance. Health Savings Accounts/FSA's. Disability Insurance. Paid Time Off. 401(k) Plan Options with Employer Match. JT4 will match 50%, up to an 8% contribution. 100% Immediate Vesting. Tuition Reimbursement. #J-18808-Ljbffr JT4